Harman Stove Company HB 38 DV manual Installation Options, Connecting Optional Thermostat

Page 28

Only For Qualified Installers

INSTALLATION (Options)

Thermostat

Front Burner

Button

Rear Burner

Button

Connecting the

Optional Thermostat

If the optional thermostat is used, it must be plugged into the terminal strip located in the lower left front corner of the heater.

When installing a millivolt control system, use only a special low resistance thermostat. DO NOT USE A REGULAR HEATING THERMOSTAT.

Be sure that all electrical connections are clean, free from corrosion, and tight. Inspect connections periodically to confirm that no corrosion has built up over time.

When properly installed and maintained, a mil- livolt control system should give many years of trouble-free service.

It is important to use wire of a gauge proper for the length of the wire:

RECOMMENDED WIRE GAUGES

Maximum

Wire

Length

Gauge

100'

14

60'

16

40'

18

25'

20

15'

22

Remote Control

The front button on the remote control can be used to turn the front burner on and off. The rear button is used to turn the rear burner on and off.

This remote uses the ultrasonic control method and does not need to be pointed directly at the fire- place.

A hand held sending unit, receiving unit, mount- ing bracket and all wiring are included when you order the remote control.

Installation instructions are packed with remote

kit.

28

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Safety Notice Harman Built Serenity HB 38 DVForyour Safety Table of Contents Introduction Important Feature Air Gate Blower System 200% To 300% More AirBlower Off Blower OnOperation OperationHOW to Turn OFF the Fire Pilot FlamesSpecifications Top Vent Rear VentMinimum Clearances from Combustible Construction This fireplace may be placed on a wood floorRear Vent Corner Top Vent Installation Options InstallationTypical Tile Facing Sectional View Installation PlacementNoncombustible Installing The Arch Face Removing The Arch FaceAssembling the Victorian Face Installing Fireplace To use Victorian Face Mounting The Victorian Face Burn Only the Fuel for which the Heater is Equipped Making The ConnectionGas Pressure Requirements Natural GasPart Numbers for SimpsonDura-Vent Pipe and Fittings Use Only Approved Venting8 x Description Venting Venting with 8 x 5 PipeRear Vent Model Approved. Never used 6 5/8 x 4 pipe for rear VentVenting with 6 5/8 x 4 Pipe Into a wallor siding Damper Settings Feet 2 toLP Conversion Kit Changing to LPTop Vent LP Kit Rear Vent LP Kit Top Rear Vent NaturalFront Rear Log Placement Installation Options Connecting Optional ThermostatOptional Remote Register Kit Register KitFloor Kit Wall KitInstalling Damper Assembly Optional Wall Register KitMount register after drywall and painting are finished Floor Register Installation Installing the Floor Register Not allow the register blower to start if Fireplace is turned off and coolsMaintenance Cleaning the GlassCleaning the Log Set and Firebox Removing the Glass FrontAir Flow Cleaning the BurnersLubrication Maintenance Verify proper operation after servicing WHI # Replacement Parts Natural Gas PropaneTrouble Shooting YesBad Replace Pirzo Ignitor Turn on gas valve Replenish supplyPilot does not stay lit GoodCheck inlet pressure Correct inlet pressureIs Pilot lit Bad Install new batteries Rear burner does not lightCheck batteries Replace solinoidLife Time

HB 38 DV specifications

The Harman Stove Company HB 38 DV is a high-performance direct vent pellet stove that is designed to meet the needs of homeowners seeking efficient and effective heating solutions. This stove is renowned for its combination of advanced technology, sleek design, and user-friendly features, making it a popular choice for both aesthetic appeal and functional heating.

One of its key features is the patented Harman burn pot design, which ensures an even burn and maximum heat output. The burn pot is engineered to minimize clinkering, allowing users to enjoy longer burn times and less frequent maintenance. The HB 38 DV not only heats efficiently but does so while using environmentally friendly wood pellets, promoting a sustainable approach to home heating.

The stove is equipped with an advanced microprocessor-controlled smart technology system. This system automatically adjusts the burn rate to match the desired temperature settings, providing optimal comfort while maintaining energy efficiency. Users can simply set their desired temperature, and the stove will automatically adjust the feed rate and combustion air to maintain that level, reducing the need for constant adjustments.

The Harman HB 38 DV also features a large viewing window, providing an inviting visualization of the flames while contributing to the room's ambiance. The stay-cool handle allows for ease of opening the door without the risk of burns. The stove is available in several finishes allowing homeowners to select a style that complements their decor.

In terms of efficiency, the HB 38 DV boasts an impressive efficiency rating of over 85%. This means that more of the fuel is converted into usable heat, leading to reduced heating costs and fewer emissions. The unit has a powerful blower that effectively distributes heat throughout the room, ensuring that the warmth is felt quickly and evenly.

The installation process is flexible due to its direct vent capability, allowing for venting through walls or ceilings. This feature enables users to install the stove in various locations within their home, maximizing both functionality and style.

In summary, the Harman Stove Company HB 38 DV combines advanced technology, efficient heating, and modern design, making it a standout option for homeowners looking for a dependable and attractive pellet stove. Its various features cater to both performance and aesthetic preferences, positioning it as a leading choice in contemporary heating solutions.
Top Page Image Contents