Harman Stove Company HB 38 DV manual Not allow the register blower to start if

Page 34

Only For Qualified Installers

Blower Assembly Ready to Install.

INSTALLATION (Options)

6.Place the blower assembly into the blower box. You may need to tilt the assembly to get it through the opening in the blower box. Make sure the wires do not get pinched.

7.Install finished flooring, carpet, tile, etc.

8.Install register by sliding it down into the opening. Make sure the speed control door is over the speed control. The register is designed to allow for a variation in floor thickness.

9.Turn on electrical power and test.

 

Operation:

Blower Assembly Installed.

Note: A temperature switch on the fireplace will

 

not allow the register blower to start if the

 

fireplace is not warm enough to blow hot air.

 

This same switch will turn the blower off, if

 

the fireplace is turned off and cools.

 

1. Open the speed control door and turn the blower

 

on to the desired speed. Turning the blower on,

 

opens the damper in the top of the fireplace and

 

allows hot air to flow.

 

2. Close the speed control door.

Speed Control

Knob

Under Floor View

34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Safety Notice Harman Built Serenity HB 38 DVForyour Safety Table of Contents Introduction Blower Off Important FeatureAir Gate Blower System 200% To 300% More Air Blower OnOperation OperationHOW to Turn OFF the Fire Pilot FlamesSpecifications Top Vent Rear VentMinimum Clearances from Combustible Construction This fireplace may be placed on a wood floorRear Vent Corner Top Vent Installation Options InstallationTypical Tile Facing Sectional View Installation PlacementNoncombustible Installing The Arch Face Removing The Arch FaceAssembling the Victorian Face Installing Fireplace To use Victorian Face Mounting The Victorian Face Gas Pressure Requirements Burn Only the Fuel for which the Heater is EquippedMaking The Connection Natural GasPart Numbers for SimpsonDura-Vent Pipe and Fittings Use Only Approved Venting8 x Description Rear Vent Model VentingVenting with 8 x 5 Pipe Approved. Never used 6 5/8 x 4 pipe for rear VentVenting with 6 5/8 x 4 Pipe Into a wallor siding Damper Settings Feet 2 toLP Conversion Kit Changing to LPTop Vent LP Kit Rear Vent LP Kit Top Rear Vent NaturalFront Rear Log Placement Installation Options Connecting Optional ThermostatFloor Kit Optional Remote Register KitRegister Kit Wall KitInstalling Damper Assembly Optional Wall Register KitMount register after drywall and painting are finished Floor Register Installation Installing the Floor Register Not allow the register blower to start if Fireplace is turned off and coolsCleaning the Log Set and Firebox MaintenanceCleaning the Glass Removing the Glass FrontAir Flow Cleaning the BurnersLubrication Maintenance Verify proper operation after servicing WHI # Replacement Parts Natural Gas PropaneBad Trouble ShootingYes Replace Pirzo Ignitor Turn on gas valve Replenish supplyCheck inlet pressure Pilot does not stay litGood Correct inlet pressureIs Pilot lit Check batteries Bad Install new batteriesRear burner does not light Replace solinoidLife Time

HB 38 DV specifications

The Harman Stove Company HB 38 DV is a high-performance direct vent pellet stove that is designed to meet the needs of homeowners seeking efficient and effective heating solutions. This stove is renowned for its combination of advanced technology, sleek design, and user-friendly features, making it a popular choice for both aesthetic appeal and functional heating.

One of its key features is the patented Harman burn pot design, which ensures an even burn and maximum heat output. The burn pot is engineered to minimize clinkering, allowing users to enjoy longer burn times and less frequent maintenance. The HB 38 DV not only heats efficiently but does so while using environmentally friendly wood pellets, promoting a sustainable approach to home heating.

The stove is equipped with an advanced microprocessor-controlled smart technology system. This system automatically adjusts the burn rate to match the desired temperature settings, providing optimal comfort while maintaining energy efficiency. Users can simply set their desired temperature, and the stove will automatically adjust the feed rate and combustion air to maintain that level, reducing the need for constant adjustments.

The Harman HB 38 DV also features a large viewing window, providing an inviting visualization of the flames while contributing to the room's ambiance. The stay-cool handle allows for ease of opening the door without the risk of burns. The stove is available in several finishes allowing homeowners to select a style that complements their decor.

In terms of efficiency, the HB 38 DV boasts an impressive efficiency rating of over 85%. This means that more of the fuel is converted into usable heat, leading to reduced heating costs and fewer emissions. The unit has a powerful blower that effectively distributes heat throughout the room, ensuring that the warmth is felt quickly and evenly.

The installation process is flexible due to its direct vent capability, allowing for venting through walls or ceilings. This feature enables users to install the stove in various locations within their home, maximizing both functionality and style.

In summary, the Harman Stove Company HB 38 DV combines advanced technology, efficient heating, and modern design, making it a standout option for homeowners looking for a dependable and attractive pellet stove. Its various features cater to both performance and aesthetic preferences, positioning it as a leading choice in contemporary heating solutions.
Top Page Image Contents