Heat & Glo LifeStyle AT-GRAND-D manual Step Installing Logs and Ember Material

Page 22

Installing the Insert (continued)

Installation (suite)

Step 7

Installing Logs and Ember Material

Positioning the Logs

If the gas logs have been factory installed they should not need to be positioned.

If the logs have been packaged separately, refer to the installation instructions that accompany the logs. Save the log instructions with this manual.

If sooting occurs, the logs might need to be repositioned slightly to avoid excessive flame impingement.

Placing the Ember Material

Two separate bags of ember material are shipped with this gas appliance:

The bag labeled Golden Ember (GE-93) is flame colorant material.

The bag labeled Glowing Ember (050-721) is standard glowing ember material.

To place the ember material:

Remove the trim door by lifting up and removing from the unit.

Unlatch the latches at the top and bottom of the glass door.

Remove the glass door from the unit.

Cover the top of the burner with a single layer of ember material (Figure 11). Then sprinkle GE-93 on top of the burner.

Save the remaining ember materials for use during fire- place servicing.

Replace the glass door.

Re-install and latch the glass door.

Replace the trim door.

Étape 7

Pose des bûches et des braises

Positionnement des bûches

Si les bûches sont montées d’usine, il est inutile de les repositionner.

Si les bûches sont livrées dans un emballage séparé, voir la notice de montage qui les accompagnent. Ranger les instructions concernant les bûches avec ce manuel.

En présence de suie, repositionner légèrement les bûches pour réduire le contact avec les flammes.

Pose des braises

Deux sacs de braises sont livrés avec l’appareil de chauffage à gaz:

Le sac de Golden Ember (GE-93) contient un matériau qui modifie la couleur des flammes.

Le sac de Glowing Ember (050-721) contient du matériau standard d’imitation des braises.

Pour poser les braises:

Soulever l’encadrement de la porte pour le déposer.

Desserrer les attaches en haut et en bas de la porte en verre.

Déposer la porte en verre.

Recouvrir le dessus du brûleur d’une simple couche de matériau à braises (Figure 11). Saupoudrer ensuite le dessus du brûleur avec du GE-93.

Mettre de côté le reste des braises pour les utiliser plus tard.

Remettre la porte en verre en place.

Resserrer les attaches.

Remettre l’encadrement en place.

22

Image 22
Contents Guide d’installation Safety and Warning Information Page Table of Contents Service Parts Log Set AssemblyAccessories / Accessoires Approval Listing and Codes 1Approvals and CodesHomologations et codes Approvals and Codes Homologations et codes suite ARD Pre-installation Preparation Avant l’installationANY Such Action MAY Possibly Cause a Fire HAZ CES Situations Peuvent Créer DES RisquesGetting Started Mise en marche suite Diagram of the AT-GRAND-D Step Installing the Vent System Installing the InsertÉtape Installation du système de ventilation Raccordement du conduit de ventilation Connecting the Vent PipeVent System Approvals HomologationsMinimum Height from Roof to Lowest Discharge Opening Installing the Insert Installing the Insert Installation suite Allumage par veilleuse DE Commande SUR 110-120 VCAStanding Pilot Ignition System Gas Controls SystemsApproved and/or licensed as required by the locality Step Gas Supply LineÉtape 4 Raccordement au gaz Fuites DE GAZ Avec UNE Flamme NUEPressure Natural Gas Propane Step Gas Pressure RequirementsÉtape Spécifications relatives La pression du gaz Pression Gaz naturel PropaneAdvertissement NE PAS Raccorder LA GAS Control Valve orTout Fonctionne Normalement Step Installing Logs and Ember Material Étape Pose des bûches et des braisesLift the top trim door up Glass Assembly Porte en verrePlacement Pose des braises Ember Material Déposer la porteRemarque Déposer L’ENCADREMENT Frontal DE Chauffage Avant D’INSTALLER L’ENCADREMENTAvertissement Lors DE LA Finition DE LA Porte ET LA Porte EN Verre DE L’APPAREIL DEMARCHE/ARRÊT Step Before Lighting the Appliance After the InstallationAprès l’installation Step Lighting the ApplianceReplacing old ember material Remplacement des braises usagéesMaintaining 4Servicing Your Appliance Entretien et révision Checking Flame Patterns, Flame HeightWhen it is hot and do not use Cleaning Glass DoorAttempt to clean the door Abrasive cleaners

AT-GRAND-D specifications

The Heat & Glo LifeStyle AT-GRAND-D is an impressive gas fireplace that combines advanced technology with contemporary design. This innovative product caters to homeowners seeking both aesthetic appeal and functional warmth, making it suitable for a variety of living spaces.

One of the standout features of the AT-GRAND-D is its expansive viewing area, providing an unobstructed view of the flames. The large glass front enhances the ambiance of any room while maximizing the visual impact of the fire. The fireplace is designed to fit seamlessly into modern and traditional decor, thanks to its diverse finishing options and customizable installation features.

The AT-GRAND-D incorporates advanced technology to enhance efficiency and comfort. One notable technology is the IntelliFire™ ignition system, which offers reliable and easy start-ups. This system ensures that the fireplace ignites quickly at the push of a button, eliminating the hassle of manual lighting. Additionally, it features an optional remote control that allows users to adjust the flame height and heat output, providing the ultimate convenience.

Safety is also a priority in the design of the AT-GRAND-D. It includes a safety screen that prevents accidental contact with the glass, ensuring peace of mind for families with children and pets. The unit is equipped with a temperature sensor, allowing it to automatically adjust the flame to maintain a comfortable environment and prevent overheating.

Another key characteristic of the Heat & Glo LifeStyle AT-GRAND-D is its impressive heat output. With a powerful BTU range, it is capable of effectively heating large areas, making it an excellent heating solution for open-concept living spaces or cozy nooks. Additionally, the fireplace is designed for energy efficiency, providing warmth while minimizing energy consumption.

The AT-GRAND-D offers customizable installation options, including the ability to use it as a built-in unit or as a standalone model with a sleek surround. This adaptability allows homeowners to create a unique focal point in their home that suits their specific needs and style preferences.

In summary, the Heat & Glo LifeStyle AT-GRAND-D gas fireplace is a top-tier option for those looking to enhance their living space with warmth and elegance. Its combination of cutting-edge technology, safety features, and stylish design makes it an excellent choice for any modern home.