Desa GCF26PR installation manual Product Identification, Product Features, Local Codes, Unpacking

Page 3

OWNER’S MANUAL

PRODUCT

IDENTIFICATION

Fireplace

Cabinet

Screen

Logs

Remote

Flame Adjustment Knob

Control Knob

Ignitor Button

Remote Selector Switch

Figure 1 - Vent-Free Propane/LP Gas Compact Fireplace

PRODUCT

FEATURES

Safety Pilot

This fireplace has a pilot with an Oxygen Depletion Sensor Shutoff System (ODS). The ODS/pilot is a required feature for vent- free room fireplaces. The ODS/pilot shuts off the fireplace if there is not enough fresh air.

Piezo Ignition System

This fireplace has a piezo ignitor. This sys- tem requires no matches, batteries, or other sources to light fireplace.

LOCAL CODES

Install and use fireplace with care. Follow all local codes. In the absence of local codes, use the latest edition of The National Fuel Gas Code ANSI Z223.1, also known as NFPA 54*.

*Available from:

American National Standards Institute, Inc.

1430 Broadway

New York, NY 10018

National Fire Protection Association, Inc.

Batterymarch Park

Quincy, MA 02269

UNPACKING

1.Remove log box and fireplace from carton. The hood is not attached.

2.Remove all protective packaging ap- plied to fireplace for shipment.

3.Make sure your fireplace includes one hardware packet and one remote con- trol packet which includes batteries.

4.Check fireplace for any shipping damage. If fireplace is damaged, promptly inform dealer where you bought fireplace.

104324

3

Image 3
Contents What to do if YOU Smell GAS VENT-FREE PROPANE/LP GAS Compact FireplaceVENT-FREE Propane Compact Fireplace Safety InformationUnpacking Product FeaturesProduct Identification Local CodesAssembling Hood AssemblyInstalling Log Assembling FireplaceConfined and Unconfined Space AIR for Combustion and VentilationProviding Adequate Ventilation Unusually Tight ConstructionAIR for Combustion Ventilation Determining FRESH-AIR Flow for Fireplace LocationDetermining if You Have a Confined or Unconfined Space Ventilation AIR Ventilation Air From Inside BuildingVentilation Air From Outdoors Locating Fireplace InstallationInstallation Items Check GAS TypeDepth BUILT-IN Fireplace InstallationRaise the mantel to an acceptable height Remove the mantel Mantel Clearances for BUILT-IN InstallationOptional Mantel Installation Assembling Brass Trim Brass trim shipped with mantelConnecting to GAS Supply Attaching Wood Base to Solid FloorFor attaching base to solid floors concrete or masonry Installation Items Needed Connecting Fireplace to GAS SupplyChecking GAS Connections Installing 9-VOLT Battery for Wireless Remote ControlFor Your Safety Read Before Lighting Operating FireplaceLighting Instructions Hand Held Remote Operation Manual Lighting ProcedureTo Turn OFF GAS To Appliance Thermostat Control OperationCleaning and Maintenance Replacement PartsInspecting Burners Troubleshooting Pane gas company Lation requirementsTop Gas odor even when control knob is in OFF positionWiring Diagram SpecificationsService Hints Technical ServiceManual shutoff valve with 1/8 NPT tap AccessoriesValve GA5010 Finished Oak Veneer- GMC43F Unfinished Oak VeneerCGCF26PR Illustrated Parts BreakdownKEY CGCF26PR Description QTY Parts ListWarranty Information