14
INSTALLATION
Log Placement for M36/VM36 Models
INSTALLATION
Continued
LOG PLACEMENT FOR M36/VM36 MODELS
1.Place small front right log (log 1) on right front of grate as shown in Figure 25.
2.Place large back log (log 2) onto grate making sure notches rest over grate as shown in Figure 25.
3.Place log 3 across logs 1 and 2 aligning pegs on log 3 with holes in logs 1 and 2 (see Figure 26).
4.Place the top of log 4 across the right side of log 2, aligning peg in log 4 with hole in log 2 (Figure 26). Rest the front of log 4 on the grate as shown in Figure 27.
5.Align the peg at top of log 5 with the hole on the top left of log 2 (see Figure 27). Rest the bottom of log 5 on grate as shown in Figure 28.
6.Align peg at the top of log 6 with hole on the front left of log 2 (Figure 27). Rest the bottom of log 6 on grate as shown in Figure 28.
To enhance the look of the hearth you may optionally place the lava rock provided around the front and sides of the burner.
NOTICE: Do not put lava rock inside the burner pan or around the air mixer fitting. Placing lava rock inside the burner pan or blocking the openings of the propane/LP
Log 2
Log 1
Log 4
Log 3
Log 2
Log 1
Figure 26 - Installing Logs 3 and 4
Log 5
Log 6
Log 4
Log 3
Figure 27 - Installing Logs 5 and 6
Figure 25 - Installing Logs 1 and 2
Figure 28 - Logs Installed for M36/VM36 Models
For more
visit www.
.com
