Installation
Continued
4.Using Phillips screwdriver, remove four screws attaching top louver (see Figure 7).
5.Place top surround panel at top of fireplace insert. Bottom edge of panel will slide under top edge of insert. Align top panel screw holes with those in insert. Install four #10 Phillips screws, do not tighten. See Figure 8.
6.Align screw holes in side panels with holes in top panel (see Figure 9). Insert and tighten #10 Phillips screws.
7.Reinstall louver removed in step 4.
8.Carefully inspect fireplace surround assembly. Make sure each part fits properly. Firmly tighten all screws installed during assembly.
Screen Mounting Shoulder
Screw (4) (DO NOT DISCARD)
Shipping Screw (DISCARD)
Shipping Screw (DISCARD)
Figure 5 - Removing Screws and Screen
Surround Side
CAUTION: Do not overtight- en.Metalcanbend,warporbreak under excessive strain.
9.Install trim after final finishing and/or painting of wall.
Phillips
Screws
Top Louver
Figure 7 - Removing Louver
Top Edge of
Fireplace Insert
Top Surround
Panel
Phillips
Screws (4)
Figure 8 - Attaching Top Surround Panel
Screen Mounting Shoulder Screws (5/16”)
Phillips
Screw
Figure 6 - Attaching Left Surround Side
Panel
Top Panel
Phillips Screws
Side
Panel
Figure 9 - Attaching Side Panels to Top
Panel
10 | www.desatech.com |