Desa GS38 Local Codes, Unpacking, Product Identification, Remote Control Accessories

Page 5

SAFETY INFORMATION

Continued

23.Refractory, glass doors, screen rails, screen mesh and solid-fuel log grates (if applicable) can be removed from the fireplace before installing the unvented fireplace insert.

24.Smoke shelves, shields and baffles may be removed if attached by mechanical fasteners.

Local Codes

Install and use fireplace insert with care. Follow all local codes. In the absence of local codes, use the latest edition of The National Fuel Gas Code, ANSI Z223.1/NFPA 54*.

*Available from:

American National Standards Institute, Inc.

1430 Broadway

New York, NY 10018

National Fire Protection Association, Inc.

Batterymarch Park

Quincy, MA 02269

Unpacking

CAUTION: Do not remove the warning and instruction labels attached to the heater base as- sembly. These markings contain important warranty and safety information.

1.With utility knife, cut the carton all the way around above the staples on the bottom tray. Lift the carton off the heater. Remove packing. Note: The hood is located in the packing on the right hand side of the heater front. Lift the heater off the bottom tray.

2.Locate two screws above top corners of the fireplace insert screen. Remove and discard these screws. Lift fireplace insert screen up and pull out to remove.

3.Remove protective packaging applied to logs, log base assembly and fireplace insert.

4.Remove fireplace insert hood from carton insert.

5.Check all items for any shipping damage. If damaged, promptly inform dealer where you bought fireplace insert.

Product

Identification

Three Piece

Log Set

Optional

Remote

Control

Control

 

 

Knobs

Remote Selector

 

Piezo

Switch (Optional)

 

Ignitor

 

 

Figure 1 - Log Base Assembly

Top Louver Assembly

Top Outer

 

 

 

 

Casing

Firebox

 

 

Hood

 

 

Firebox

 

 

Support

 

 

Screen

Assembly

Bottom Louver

 

Gas Line

Blower

Access

Assembly

 

 

Assembly

 

Figure 2 - Fireplace Insert

Remote Control

Accessories

There are four optional remote controls that can be purchased separately for this fireplace insert:

•wall switch

•wall thermostat

•hand-held ON/OFF remote

•hand-held thermostat remote See Accessories, page 34.

113195-01Cwww.desatech.com

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Remote Ready GAS Fireplace Insert Shown with GS38 Surround Kit G8010 Brick Liner AccessoriesVI33NRB and VI33PRB Safety Information Table of ContentsSafety Information Safety Information Local Codes Remote Control AccessoriesUnpacking Product IdentificationProviding Adequate Ventilation Product FeaturesAir For Combustion Ventilation Determining if You Have a Confined or Unconfined Space Determining FRESH-AIR Flow for Heater LocationConfined and Unconfined Space Ventilation AIR InstallationVentilation Air From Inside Building Ventilation Air From OutdoorsBlower Accessory Installing Surround Kit GS38 or GS43Check GAS Type Electrical HookupRemoving Screws and Screen Material, Side Wall and Ceiling Installing HoodInstallation Clearances Installation Items Needed Installing Gas Piping to Fireplace LocationNatural Connecting Fireplace Insert to GAS SupplyPropane/LP Checking Gas Connections Checking GAS ConnectionsTest Pressures Equal To or Less Than Psig 3.5 kPa Fireplace Insert Installation into masonry fireplacePressure Testing Fireplace Insert Gas Connections Assembling and attaching trim Connecting Fireplace Insert to Gas Supply,Installing Log Set Installing LogsInstalling 9-Volt Battery Not Included Receiver Installing 9-Volt BatteriesInstalling Remote Receiver Unit Lighting Instructions For your safety Read before lightingOperating Fireplace Insert To Turn OFF GAS To Appliance Manual Lighting ProcedureOptional Hand-Held Remote OperationAuto Thermostatic Mode Manual ModeSafety Features On/Off Series Model HC100Key Pad Lock Feature Auto Shutoff FeatureInspecting Burners Optional Blower OperationBurner Flame Pattern Cleaning MaintenanceBurner Primary AIR Holes Main burnerLogs Wiring DiagramsObserved Problem Possible Cause Remedy TroubleshootingMaintenance, See Cleaning and Mainte Statement above Gas leak. See WarningReplacement Parts SpecificationsTechnical Service Service HintsModels VI33NRB and VI33PRB Illustrated Parts BreakdownParts List Fireplace Insert Models VI33NRB and VI33PRB Parts List Equipment Shutoff Valve GA5010 Receiver and HAND-HELD Remote Control KIT HRC100 SeriesWALL-MOUNT ON/OFF Switch 113195-01C Limited Warranty VENT-FREE GAS Fireplace Insert Warranty InformationKeep this Warranty

GS38 specifications

Desa GS38 is an innovative product that stands at the intersection of cutting-edge technology and eco-friendly design, making it a standout choice in its category. This model is an embodiment of modern engineering and functionality, catering to the needs of both residential and commercial applications.

One of the defining features of the Desa GS38 is its energy-efficient performance. Designed to minimize energy consumption while maximizing output, the GS38 utilizes advanced technologies that optimize fuel efficiency. This not only helps in reducing utility bills but also aligns with global efforts toward sustainability, making it an environmentally responsible choice. The efficient combustion system integrated into the device ensures that emissions are kept to a minimum, further contributing to a cleaner atmosphere.

Technologically, the Desa GS38 is equipped with a state-of-the-art digital control system. This allows users to monitor and adjust settings with precision, leading to greater comfort and convenience. The intuitive interface makes it easy to program heating schedules, ensuring that spaces are warmed up before they are used, eliminating energy wastage. The device also features smart connectivity, allowing it to be integrated with home automation systems for remote control and operation.

Another significant characteristic of the Desa GS38 is its robust build quality. Made from high-grade materials, the unit is designed to withstand harsh conditions while maintaining operational excellence. The heat-resistant components extend the lifespan of the product, ensuring reliability even during peak usage times.

Safety is also a priority in the design of the Desa GS38. Equipped with multiple safety features such as overheat protection and automated shut-off mechanisms, users can have peace of mind knowing that the device operates safely. This makes it an ideal solution for families and businesses alike.

In summary, the Desa GS38 is a remarkable heating solution that combines energy efficiency, advanced technology, and outstanding durability. Its user-friendly interface, smart connectivity, and safety features make it a versatile choice for various applications. As we move toward a more sustainable future, the Desa GS38 marks a significant step in the direction of eco-conscious innovation in heating solutions.
Top Page Image Contents