Desa GS38 To Turn OFF GAS To Appliance, Manual Lighting Procedure, Optional Hand-Held

Page 20

Operating Fireplace

Insert

Continued

7.With control knob pressed in, press and release ignitor button. This will light pilot. The pilot is attached to the front burner. If needed, keep pressing ignitor button until pilot lights.

Note: If pilot does not stay lit, contact a qualified service person or gas supplier for repairs. Until repairs are made, light pilot with match. To light pilot with match, see Manual Lighting Procedure.

8.Keep control knob pressed in for 30 seconds after lighting pilot. After 30 seconds, release control knob.

• If control knob does not pop out when released, contact a qualified service person or gas supplier for repairs.

Note: If pilot goes out, repeat steps 4 through 8.

9.Slightly push in and turn control knob coun-

terclockwise to the ON position.

10.Wait one minute and switch selector switch to the ON position to light burners.

11.Set flame adjustment knob to any level between HI and LO.

CAUTION: Do not try to ad- just heating levels by using the equipment shutoff valve.

WARNING: Make sure the selector switch is in the OFF position when you are away from home for long periods of time. Heater will come on automati- cally with selector switch in the ON position.

Pilot

Pilot Burner

Ignitor

Burner

Ignitor

Electrode

Electrode

 

 

Natural Gas

Propane/LP Gas

Figure 32 - Pilot

TO TURN OFF GAS

TO APPLIANCE

Shutting Off Heater

1. Turn control knob clockwise to the OFF position.

2a. Set selector switch in the OFF position.

2b. If Using Optional Hand-Held Remote: Set remote selector switch in the OFF position to keep from draining battery.

Shutting Off Burners Only (pilot stays lit) You may shut off the burners and keep the pilot lit by doing one of the following:

•Turn control knob clockwise to the PILOT position.

•Use remote control manual OFF button.

•Set remote selector switch in the OFF position.

MANUAL LIGHTING

PROCEDURE

1.Follow steps 1 through 6 under Lighting Instructions, page 19.

2.Depress control knob and light pilot with match.

3.Keep control knob pressed in for 30 seconds after lighting pilot. After 30 seconds, release control knob. Now follow steps 9 through 11 under Lighting Instructions, column 1.

optional Hand-Held

REMOTE OPERATION

Note: All remote control accessories must be purchased separately (see Accessories, page 34). Follow instructions included with the remote control.

NOTICE: You must light the pilot before using the hand-held re- mote control unit. See Lighting Instructions on page 19.

After lighting, let pilot flame burn for about one minute. Turn control knob to ON posi- tion. Adjust flame adjustment knob anywhere between HI and LO. Slide the selector switch to the REMOTE position (see Figure 33, page 21). Note: The burner may light if hand-held remote was on when selector switch was last turned off. You can now turn the burner on and off with the hand-held remote control unit.

IMPORTANT: Do not leave the selector switch in the REMOTE or ON position when the pilot is not lit. This will drain the battery.

20

www.desatech.com

113195-01C

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Remote Ready GAS Fireplace Insert Shown with GS38 Surround Kit G8010 Brick Liner AccessoriesVI33NRB and VI33PRB Table of Contents Safety InformationSafety Information Safety Information Remote Control Accessories Local CodesUnpacking Product IdentificationProviding Adequate Ventilation Product FeaturesAir For Combustion Ventilation Determining if You Have a Confined or Unconfined Space Determining FRESH-AIR Flow for Heater LocationConfined and Unconfined Space Installation Ventilation AIRVentilation Air From Inside Building Ventilation Air From OutdoorsInstalling Surround Kit GS38 or GS43 Blower AccessoryCheck GAS Type Electrical HookupRemoving Screws and Screen Material, Side Wall and Ceiling Installing HoodInstallation Clearances Installing Gas Piping to Fireplace Location Installation Items NeededNatural Connecting Fireplace Insert to GAS SupplyPropane/LP Checking GAS Connections Checking Gas ConnectionsTest Pressures Equal To or Less Than Psig 3.5 kPa Fireplace Insert Installation into masonry fireplacePressure Testing Fireplace Insert Gas Connections Connecting Fireplace Insert to Gas Supply, Assembling and attaching trimInstalling Logs Installing Log SetInstalling 9-Volt Battery Not Included Receiver Installing 9-Volt BatteriesInstalling Remote Receiver Unit Lighting Instructions For your safety Read before lightingOperating Fireplace Insert Manual Lighting Procedure To Turn OFF GAS To ApplianceOptional Hand-Held Remote OperationManual Mode Auto Thermostatic ModeSafety Features On/Off Series Model HC100Auto Shutoff Feature Key Pad Lock FeatureInspecting Burners Optional Blower OperationCleaning Maintenance Burner Flame PatternBurner Primary AIR Holes Main burnerWiring Diagrams LogsTroubleshooting Observed Problem Possible Cause RemedyMaintenance, See Cleaning and Mainte Gas leak. See Warning Statement aboveSpecifications Replacement PartsTechnical Service Service HintsIllustrated Parts Breakdown Models VI33NRB and VI33PRBParts List Fireplace Insert Models VI33NRB and VI33PRB Parts List Equipment Shutoff Valve GA5010 Receiver and HAND-HELD Remote Control KIT HRC100 SeriesWALL-MOUNT ON/OFF Switch 113195-01C Limited Warranty VENT-FREE GAS Fireplace Insert Warranty InformationKeep this Warranty

GS38 specifications

Desa GS38 is an innovative product that stands at the intersection of cutting-edge technology and eco-friendly design, making it a standout choice in its category. This model is an embodiment of modern engineering and functionality, catering to the needs of both residential and commercial applications.

One of the defining features of the Desa GS38 is its energy-efficient performance. Designed to minimize energy consumption while maximizing output, the GS38 utilizes advanced technologies that optimize fuel efficiency. This not only helps in reducing utility bills but also aligns with global efforts toward sustainability, making it an environmentally responsible choice. The efficient combustion system integrated into the device ensures that emissions are kept to a minimum, further contributing to a cleaner atmosphere.

Technologically, the Desa GS38 is equipped with a state-of-the-art digital control system. This allows users to monitor and adjust settings with precision, leading to greater comfort and convenience. The intuitive interface makes it easy to program heating schedules, ensuring that spaces are warmed up before they are used, eliminating energy wastage. The device also features smart connectivity, allowing it to be integrated with home automation systems for remote control and operation.

Another significant characteristic of the Desa GS38 is its robust build quality. Made from high-grade materials, the unit is designed to withstand harsh conditions while maintaining operational excellence. The heat-resistant components extend the lifespan of the product, ensuring reliability even during peak usage times.

Safety is also a priority in the design of the Desa GS38. Equipped with multiple safety features such as overheat protection and automated shut-off mechanisms, users can have peace of mind knowing that the device operates safely. This makes it an ideal solution for families and businesses alike.

In summary, the Desa GS38 is a remarkable heating solution that combines energy efficiency, advanced technology, and outstanding durability. Its user-friendly interface, smart connectivity, and safety features make it a versatile choice for various applications. As we move toward a more sustainable future, the Desa GS38 marks a significant step in the direction of eco-conscious innovation in heating solutions.
Top Page Image Contents