Desa GS38 On/Off Series Model HC100, Thermostat Series Model HRC200, Manual Mode, Safety Features

Page 21

Operating Fireplace

Insert

Continued

Flame

Adjustment Knob

Control Knob

Remote Selector Switch in

in On Position

Remote Position (Optional

 

Hand-Held Remote Control)

Figure 33 - Setting the Remote Selector

Switch, Control Knob and Flame

Adjustment Knob for Remote Operation

On/Off Series (Model HC100)

Hold the control button on the hand-held remote until burner turns on. Hold the control button again until burner turns off (see Figure 34).

To Lock press both buttons on hand-held remote control until light stops flashing. Hand- held remote control is now locked. If the fire is on it will be turned off automatically. In the locked state, the light will not light up when any button is pressed.

To Unlock press both buttons together on hand-held remote control until the light stops flashing. The hand-held remote is now unlocked.

Indicator

Light

Control Button

Turns Burners

On and Off

Figure 34 - On/Off Hand-Held Remote

Control Unit (HRC100)

Thermostat Series (Model

HRC200)

The hand-held remote can be operated using either the manual mode (MANU) or thermo- static mode (AUTO) (see Figure 35). To select Fahrenheit/Centigrade mode display, carefully press the ˚C/˚F mode button with the end of a paper clip or similar blunt object.

Manual Mode

1. Press the POWER and LOCK buttons together to turn on the hand-held remote control.

2. Press the MANU button to turn on the fireplace.

3. Press the POWER and LOCK buttons together to turn off the fireplace.

Auto (Thermostatic) Mode

1. Press the POWER and LOCK buttons together to turn on the hand-held remote control.

2. Press AUTO button to select this mode.

3. Set the desired room temperature by press- ing the TEMP + or - buttons.

4. Press the POWER and LOCK buttons together to turn off the fireplace

Note: Do not leave the hand-held remote in the AUTO mode close to the fireplace. The radiant heat from the fireplace will turn off the fireplace. Ideally, place the hand-held remote in the center of the room facing towards the fireplace.

Note: Do not hold the hand-held remote for a long time. Body temperature will affect its operation in the AUTO mode.

Safety Features

When away from home for an extended period of time or as a child safety feature to prevent accidental ignition of the fireplace, the receiver ON/OFF/REMOTE switch should be in the OFF position.

Digital Display Shows

Temperature and Settings

 

 

 

 

Turns

Locks

 

 

 

Hand-Held

ROOM

 

SET

Remote On

System to

 

AUTO

 

TEMP

 

TEMP

or Off and

Prevent

 

 

 

 

 

 

Allows You

Accidental

LOCK

TEMP

POWER

 

to Choose

Ignition

 

 

 

 

 

 

the Manual

 

 

 

 

Turns

MANU

ºC/ºF

AUTO

Setting

Burners

Selects Auto

On or Off

Setting

 

Increases and Decreases

Room Temperature in

AUTO Mode

Figure 35 - Thermostat Hand-Held Remote Control Unit (HRC200)

113195-01C

www.desatech.com

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Shown with GS38 Surround Kit G8010 Brick Liner Accessories VI33NRB and VI33PRBRemote Ready GAS Fireplace Insert Safety Information Table of ContentsSafety Information Safety Information Local Codes Remote Control AccessoriesUnpacking Product IdentificationProduct Features Air For Combustion VentilationProviding Adequate Ventilation Determining FRESH-AIR Flow for Heater Location Confined and Unconfined SpaceDetermining if You Have a Confined or Unconfined Space Ventilation AIR InstallationVentilation Air From Inside Building Ventilation Air From OutdoorsBlower Accessory Installing Surround Kit GS38 or GS43Check GAS Type Electrical HookupRemoving Screws and Screen Installing Hood Installation ClearancesMaterial, Side Wall and Ceiling Installation Items Needed Installing Gas Piping to Fireplace LocationConnecting Fireplace Insert to GAS Supply Propane/LPNatural Checking Gas Connections Checking GAS ConnectionsFireplace Insert Installation into masonry fireplace Pressure Testing Fireplace Insert Gas ConnectionsTest Pressures Equal To or Less Than Psig 3.5 kPa Assembling and attaching trim Connecting Fireplace Insert to Gas Supply,Installing Log Set Installing LogsInstalling 9-Volt Batteries Installing Remote Receiver UnitInstalling 9-Volt Battery Not Included Receiver For your safety Read before lighting Operating Fireplace InsertLighting Instructions To Turn OFF GAS To Appliance Manual Lighting ProcedureOptional Hand-Held Remote OperationAuto Thermostatic Mode Manual ModeSafety Features On/Off Series Model HC100Key Pad Lock Feature Auto Shutoff FeatureInspecting Burners Optional Blower OperationBurner Flame Pattern Cleaning MaintenanceBurner Primary AIR Holes Main burnerLogs Wiring DiagramsObserved Problem Possible Cause Remedy TroubleshootingMaintenance, See Cleaning and Mainte Statement above Gas leak. See WarningReplacement Parts SpecificationsTechnical Service Service HintsModels VI33NRB and VI33PRB Illustrated Parts BreakdownParts List Fireplace Insert Models VI33NRB and VI33PRB Parts List Receiver and HAND-HELD Remote Control KIT HRC100 Series WALL-MOUNT ON/OFF SwitchEquipment Shutoff Valve GA5010 113195-01C Warranty Information Keep this WarrantyLimited Warranty VENT-FREE GAS Fireplace Insert

GS38 specifications

Desa GS38 is an innovative product that stands at the intersection of cutting-edge technology and eco-friendly design, making it a standout choice in its category. This model is an embodiment of modern engineering and functionality, catering to the needs of both residential and commercial applications.

One of the defining features of the Desa GS38 is its energy-efficient performance. Designed to minimize energy consumption while maximizing output, the GS38 utilizes advanced technologies that optimize fuel efficiency. This not only helps in reducing utility bills but also aligns with global efforts toward sustainability, making it an environmentally responsible choice. The efficient combustion system integrated into the device ensures that emissions are kept to a minimum, further contributing to a cleaner atmosphere.

Technologically, the Desa GS38 is equipped with a state-of-the-art digital control system. This allows users to monitor and adjust settings with precision, leading to greater comfort and convenience. The intuitive interface makes it easy to program heating schedules, ensuring that spaces are warmed up before they are used, eliminating energy wastage. The device also features smart connectivity, allowing it to be integrated with home automation systems for remote control and operation.

Another significant characteristic of the Desa GS38 is its robust build quality. Made from high-grade materials, the unit is designed to withstand harsh conditions while maintaining operational excellence. The heat-resistant components extend the lifespan of the product, ensuring reliability even during peak usage times.

Safety is also a priority in the design of the Desa GS38. Equipped with multiple safety features such as overheat protection and automated shut-off mechanisms, users can have peace of mind knowing that the device operates safely. This makes it an ideal solution for families and businesses alike.

In summary, the Desa GS38 is a remarkable heating solution that combines energy efficiency, advanced technology, and outstanding durability. Its user-friendly interface, smart connectivity, and safety features make it a versatile choice for various applications. As we move toward a more sustainable future, the Desa GS38 marks a significant step in the direction of eco-conscious innovation in heating solutions.
Top Page Image Contents