Vermont Casting 2080 installation instructions CFM Corporation

Page 24

CFM Corporation

2695 Meadowvale Blvd. • Mississauga, Ontario, Canada L5N 8A3

800-668-5323 • www.cfmcorp.com

Image 24

Contents Winter Warm Table of Contents IntroductionSpeciﬁcations WinterWarm Small InsertInstallation Requirements for Existing FireplacesRequirements for Existing Chimneys Chimney Height / U.S. and CanadaMinimum Fireplace Dimensions When the insert is installed in a factory-built ﬁre- placeGeneral Considerations / U.S Sealing Requirements / U.SClearance Requirements Hearth RequirementsInstalling the WinterWarm Small Insert Optional Surround PackagesInstall the Chimney Connector Starter Pipe. Not supplied Connect the Blower power cord to the power supplyOperation Your WinterWarm Insert’s Controls and What They DoDamper Primary Air ControlUse the Air Control Settings that Work Best for You WinterWarm Small Insert Control SettingsFans Burn Only High-Quality WoodHow To Build and Sustain a Wood Fire High-Efﬁciency Wood Burning with Catalytic CombustionStarting and Maintaining a Wood Fire Reloading and Reviving a Wood Fire Special Tactics for Cold-Climate HeatingDo not over-ﬁre this heater Remove and Store Ash Safely Maintenance Cleaning the GlassAdjust the Door Latch Periodically Care of the Porcelain Enamel SurfaceAdjust the Damper as Needed Removing and Replacing Door GlassHow to Replace Gaskets Replacing the Insert’s Door GasketsReplaceable WinterWarm Small Insert Fiberglass Gaskets When To Suspect a Combustor Problem Care of the Catalytic CombustorRemoval and Inspection of the Combustor Refractory Package Chimney System Clean Chimney System is Safer Works Better Watch for Better ResultsLearn To Recognize Avoid Creosote Fireplace System Maintenance Schedule FireplaceFlex Connection Appendix Catalytic Combustor WinterWarm Small Insert Model WinterWarm Small Insert Warranty CFM Corporation