Dimplex DF2608 owner manual Site Selection Preparation

Fireplace Installation

the fireplace (Figure 2).

5.Place the Front Glass onto the track of the fireplace

(Figure 2) and slide it along the front until it reaches the far left of the unit.

6.Re-attach the right hand trim piece using the three (3) Philips screws from step 4.

Site Selection and

Preparation

This section provides instructions for selecting a location and preparing the site to install the fireplace into your Dimplex mantel surround.

1.Select a suitable location that is not susceptible to moisture and is away from drapes, furniture and high traffic.

2.For ease of electrical hook up you may wish to locate

the fireplace near an existing outlet (refer to NOTE 1).

3.Store the fireplace in a safe dry and dust free location.

CAUTION: Clearance for air circulation beneath the fireplace is provided by two

(2) spacers. Do not install fireplace directly on carpet or similar surfaces which may restrict air circulation. If installing the fireplace in a carpeted area, place a one- piece, solid flat surface under the fireplace. Ensure that all feet rest securely on this surface.

!NOTE: The dimensions of the fireplace with the trim are 27 ⅜ inch (695 mm) wide x 23 ½ inch (596 mm) high x 8 3/4 inch (222 mm) deep.

Figure 3	27 ⅜”
	(695 mm)	26 ¼”
		(663 mm)
22 ⅞”	23 ½”	8 ¾”
(580	(596 mm)	(222 mm)
mm)
8		www.dimplex.com