Enviro Indoor Gas Fireplace owner manual Sienna

Page 1

SHERWOOD INDUSTRIES IS AN ENVIRONMENTALLY RESPONSIBLE COMPANY. THIS MANUAL IS PRINTED ON RECYCLED PAPER.

PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE

Sienna

B Y : S H E R W O O D I N D U S T R I E S LT D

OWNER’S MANUAL

WHAT TO DO IF YOU SMELL GAS

Open windows/extinguish any open flame.

Do not try to light any appliance.

Do not touch any electrical switch or use any phone in your building.

Immediately call your gas supplier from a neighbour’s phone. Follow the gas supplier’s instructions.

If you cannot reach your gas supplier, call the fire department.

FOR YOUR SAFETY

Do not store or use gasoline or other flammable vapours and liquids in the vicinity of this or any other appliance.

This appliance is only for use with the type of gas indicated on the rating plate. This appliance is not convertible for use with other gases, unless a certified kit is used.

WARNING

If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or loss of life. Installation and service must be performed by a qualified installer, service agency or the gas supplier.

Massachusetts installations (Warning): This product must be installed by a licensed plumber or gas fitter when installed within the Commonwealth of Massachusetts. Other Massachusetts code requirements: Flexible connector must not be longer than 36in., a shut off valve must be installed; only direct vent sealed combustion products are approved for bedrooms/bathrooms. A carbon monoxide detector is required in all rooms containing gas fired direct vent appliances.

50-1096

Image 1
Contents Sienna General Safety PrecautionsTable of Contents Vented GAS Fireplace Heater Sienna BV/DV NG/LPG Codes And ApprovalsDimensions Specifications33 x 46 84cm x 193 cm Pilot Lighting Instructions Operating InstructionsFan control Component Sound & ReasonMaintenance And Service Qualified Installers only Conversion Kit Installation Kit Parts ListFlip valve Reconnect the electrical power to the unitSienna Initial InstallationDescription of Fireplace Dimension Direct Vent Width At Back Direct Vent Model Venting Fireplace Inserts Fan is thermostatically controlled and it will To Test Valve Pressures Gas Line ConnectionConverting a Direct Vent Fireplace to a B-VENT Fireplace Left trim is so the power cord can be Secondary InstallationRun to the outside of the panel LOG SET and Ember Installation Third Stage Log Set Installation Sienna complete log set-up with embers burning Never operate the fireplace with the glass door removedBrick panel set is fragile, handle with extreme care Problem Possible Cause Solution Trouble ShootingNumber Parts List- Unit ComponentsParts Diagram Components Parts Diagram Burner Parts List Options Parts Diagram Options To the Dealer WarrantyInstallation Data Sheet