Enviro DV42DX owner manual Installation Instructions, Wire Spacer in Place

Page 17

Initial Installation

QUALIFIED INSTALLERS ONLY

INSTALLATION INSTRUCTIONS:

1.Plan your installation and clearances to combustibles. Decide on a location for the unit that will meet the clearances noted in the venting section, and any or all local code requirements.

2. Set the appliance in the desired location. Determine if any wall studs, electrical wiring, or plumbing pipes are in the way of the venting system as it passes through the exterior wall. The fireplace location should be adjusted if obstructions are found in the wall.

3.Project a line from the center point of the flue outlet upward and outward to the desired flue outlet location on the exterior wall. Using this center point, scribe a 10” (25.4 cm) hole or square on the

wall. Cut the hole from the interior through

����

the exterior wall surfaces.

�������

4. Frame the hole as shown in Figure 24.

 

5.Trim the wall thimble to match the wall thickness as necessary. Install the wall

thimble and secure it to the inner wall

frame using four (4) 11⁄2” wood screws. If

a wall is greater than 8” (203mm) in depth,

the clearance above the flex must be 43⁄8”

(111mm)

Figure 21: Wire Spacer in Place.

 

Figure 20: Wire Spacers.

Horizontal Vent Termination

 

6. Apply a bead of Mill-Pac Black

 

sealant to the new Ø4” (10 cm) by

 

5” (12.5 cm) provided flue collar

 

adaptor. Press the flue collar into

 

the flue outlet of the fireplace so

 

that the Mill-Pac seals the flue

 

collar to the flue outlet.

 

7. Stretch both the Ø4” (10 cm) flex

Wall Framing

vent and the Ø65⁄8” (16.25 cm) flex

Wall Thimble

intake liner to the length needed

Fire Stop

 

to ensure the flex can be easily

Exhaust 4" Flex Pipe

connected to the vent terminal.

 

8. Slide the Ø65⁄8” (16.25 cm) flex

 

intake liner over the flex vent.

Wire Spacers

Install four (4) wire spacers

 

around the flex pipe. Ensure the

 

wire spacers are positioned at

 

either end of the pipes, and at

Combusion Air 6 5/8" Flex Pipe

each end of any elbows in the

 

liners (refer to Figure 20 and 21).

 

9. Install the flex pipe assembly

Flue Pipe Adaptor

through the wall thimble, ensure

 

that this portion of pipe slides

Figure 22: Installation of Fireplace Horizontal Vent Kit.

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents S H E R W O O D I N D U S T R I E S L T D DV42DXGeneral Safety PrecautionsTable of Contents This Enviro DV42DX Fireplace Codes And ApprovalsVented GAS Fireplace Heater DV42DX NG/LPG Installation Options SpecificationsPilot Lighting Instructions Operating InstructionsNever USE AN Open Flame for Leak Testing Component Sound & Reason To Turn GAS Fireplace OFFNo substitute materials are allowed Maintenance And ServiceCleaning Decorative Surfaces Step To be Installed by a Qualified Service Agency onlyQualified Installers only Initial InstallationCorner Installation Sheet are only approximations it is recommended Rock or Brick Finish If the faceMantel Clearances Qnty Description KIT ComponentsWire Spacer in Place Installation InstructionsManufacturer Trade Name Nominal Sizes SV4L6 Direct Vent Secure Vent Ameri Vent Description TempVenting terminals can not be recessed into a wall or siding Vent Configurations and Restrictor Settings Horizontal Vent Termination Possibility of a fireVertical Vent Termination AssembleRoof Pitch Minimum Height H Feet Meters Use of Wall Straps Ducting Electrical Requirements To Test Valve Pressures GAS Line ConnectionNever operate the fireplace with the glass door removed Secondary InstallationImportant installation notes First Stage Log Set Installation Secondary Installation Burner and FAN Removal Problem Possible Cause Solution TroubleshootingReference Description Part Number Parts List ComponentsComponentsParts Diagram Reference Options Part Number Parts List OptionsParts Diagram Options To the Distributor WarrantyTo the Dealer Installation Data Sheet

DV42DX specifications

The Enviro DV42DX is a highly efficient and eco-friendly ventilation device designed to enhance indoor air quality while minimizing energy consumption. This powerful product is tailored for residential and commercial applications, making it a versatile choice for those looking to improve air circulation.

One of the standout features of the Enviro DV42DX is its dual-speed fan system, which allows users to select the optimal airflow needed for various conditions. This not only provides flexibility but also contributes to energy efficiency, as it can operate at lower speeds during quieter periods. The adjustable fan settings ensure that users can tailor the device’s performance to meet their specific requirements.

Incorporating advanced filtration technologies, the Enviro DV42DX features an integrated HEPA filter that effectively captures airborne particles, allergens, and pollutants. This makes it an ideal choice for individuals with allergies or respiratory conditions, as it significantly reduces exposure to harmful elements in the air. Additionally, the unit is equipped with a charcoal filter that helps eliminate odors, further enhancing the indoor atmosphere.

The Enviro DV42DX is designed with user convenience in mind. It includes a programmable timer and a remote control, allowing users to operate the device from a distance and set it on a schedule that aligns with their routines. This feature not only enhances the ease of use but also encourages energy-saving habits by allowing the unit to operate only when needed.

Another characteristic of the Enviro DV42DX is its energy-efficient design, boasting a high Energy Star rating. The device not only reduces energy consumption but also saves users money on utility bills over time. Its durable construction and high-quality materials ensure longevity and reliable performance, making it a wise investment for maintaining a healthy living or working environment.

Safety is also a top priority for the Enviro DV42DX. The unit is equipped with built-in sensors that monitor air quality and automatically adjust operation to ensure optimal performance. This smart technology ensures that the device operates efficiently while maintaining safe levels of indoor air quality.

In conclusion, the Enviro DV42DX offers an impressive array of features and technologies that prioritize indoor air quality and energy efficiency. Its combination of advanced filtration, user-friendly controls, and smart technology makes it an indispensable tool for any environment aiming for cleaner and healthier air. Investing in the Enviro DV42DX is a step toward a more sustainable and comfortable indoor atmosphere.
Top Page Image Contents