Enviro EG 28 B owner manual Vent Terminal Clearances

Page 5

VENT TERMINAL CLEARANCES

Figure 3

A= Clearance above grade, verandah, porch, deck, or

H= *Not to be installed above a meter/regulator

[balcony (*12 inches (30cm) minimum]

assembly within 3 feet (90cm) horizontally from

B= Clearance to window or door that may be opened [*12

the center-line of the regulator

inches (30cm) minimum]

I= Clearance to service regulator vent outlet

C= Clearance to permanently closed window

[*6 feet

(1.8m) minimum]

[minimum 12 inches (30cm) recommended to

J= Clearance to non-mechanical air supply inlet to

prevent condensation on window]

building or the combustion air inlet to any

D= Vertical clearance to ventilated soffit located

other appliance [12 inches (30cm) minimum]

above the terminal within a horizontal

K= Clearance to a mechanical air supply inlet

distance of 2 feet (60cm) from the center-line

[*6 feet (1.8m) minimum]

of the terminal 24 inches ( 60cm) minimum

L= *** Clearance above paved side-walk or paved

E= Clearance to unventilated soffit

driveway located on public property

[18 inches (45cm) minimum]

[*7 feet

(2.1m) minimum]

F= Clearance to outside corner [12 inches minimum]

M= Clearance under verandah, porch, deck, or

G= Clearance to inside corner [`12 inches minimum]

balcony [*24 inches (60cm) minimum **]

***A vent shall not terminate directly above a sidewalk or paved driveway, which is located between two single family dwellings and serves both dwellings.

**Only permitted if verandah, porch, deck, or balcony, is fully open on a minimum of 2 sides beneath the floor

As specified in CGA B149 Installation Codes (1991) Note: Local Codes or Regulations may require different clearances

5

Image 5
Contents What to do if YOU Smell GAS For Your SafetyFor Your Safety Safety PrecautionsCode Approvals Table of ContentsAssembly Instructions Clearances Deciding Where to Locate Your StoveDimensions Vent Terminal Clearances Venting Flue GAS Spill SwitchManufacturers General Venting Guidelines Using AN Existing ChimneyInstalling the Logset Installing the Glowing EmbersLighting Instructions Operating InstructionsTrouble Shooting Maintenance and TechnicalProblem Possible Cause Solution GAS Line Connection Never USE AN Open Flame for Leak Testing ElectricalOrifice SIZES, Pressure and BTU’S Natural GAS Propane GASInstalling Remote Thermostat or Wall Switch Removing or Installation of the Blower Parts and AccessoriesFuel Conversion Adjusting the VenturiTo the Distributor WarrantyTo the Dealer Parts List Exploded EC-019 NG, 020 LP EG28-143 NG EG28-145 LPGEC-011 EG28-10129/2002 Installation Data Sheet

EG 28 B specifications

The Enviro EG 28 B is an innovative solution in the realm of environmental technology, specifically designed for efficient waste management and energy resource recovery. This advanced equipment stands out in both functionality and sustainability, making it suitable for various applications in municipal and industrial settings.

One of the main features of the Enviro EG 28 B is its robust waste processing capability. The system can handle a diverse range of materials, including organic waste, plastics, and other recyclables. This flexibility allows users to maximize the efficiency of their waste management operations, promoting a circular economy. The unit is designed with a high throughput capacity, enabling it to process large volumes of waste without sacrificing performance.

The Enviro EG 28 B utilizes cutting-edge technologies to optimize every phase of waste treatment. Integrated sensors and automated controls monitor the waste processing in real-time, ensuring that the system operates at peak efficiency. This not only maximizes the recovery of valuable resources but also minimizes energy consumption. The inclusion of advanced sorting mechanisms further enhances the unit's effectiveness, allowing for the precise separation of materials for recycling and composting.

Another characteristic that sets the Enviro EG 28 B apart is its environmentally friendly approach. The equipment is engineered to significantly reduce greenhouse gas emissions throughout its operational lifespan. It employs a closed-loop system that captures and repurposes gases generated during processing, turning potential pollutants into usable energy. This aligns with global sustainability goals and positions the Enviro EG 28 B as a leader in eco-conscious waste management solutions.

Additionally, the Enviro EG 28 B is designed with user-friendliness in mind. The intuitive interface allows for easy operation and maintenance, ensuring that operators can manage the system without extensive training. Moreover, its compact design is adaptable to various locations, allowing for installation in space-constrained environments while maintaining high operational standards.

Overall, the Enviro EG 28 B exemplifies the future of waste management technology, combining efficiency, sustainability, and ease of use. Its innovative features and technologies not only help reduce environmental impact but also provide significant economic benefits to organizations seeking to optimize their resource management practices. As the need for effective waste processing continues to grow, the Enviro EG 28 B stands ready to meet these challenges head-on.