Enviro EG 28 B owner manual Installing the Glowing Embers, Installing the Logset

Page 8

INSTALLATION OF LOG SET and EMBERS

INSTALLING THE GLOWING EMBERS

A bag of Rock Wool embers is provided for use on the burner tray.

CAUTION: Use only the type of ember material supplied with this appliance. Due to the irregular size of the ember material there may be more than required.

If over time, through cleaning and servicing, these embers require replacement, contact your nearest ENVIROGAS dealer for replacement embers.

Remove the ember material from the plastic bag.

Cover the shaded areas in the diagram shown beside.

Totally fill these areas with glowing ember material

Do not pack down, leave embers loose.

CAUTION: NEVER OPERATE THIS APPLIANCE WITH THE DOOR REMOVED

INSTALLING THE LOGSET

Carefully remove log from box. Check to ensure there is no damage. It is very important to install this log in its proper position to insure safe, optimum operating conditions.

1.Open the front door.

2.Place each piece of the log set into the firebox resting the pins in the holes in the log supports.

3.Close the door and tighten securely.

Upon the first light up, watch for ignition to all burner ports. If a long delay is noted:

a)First, wait for the appliance to cool down

b)Open the front door of the appliance.

(See adjusting the venturi section to adjust air for proper flame).

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents For Your Safety What to do if YOU Smell GASSafety Precautions For Your SafetyCode Approvals Table of ContentsAssembly Instructions Clearances Deciding Where to Locate Your StoveDimensions Vent Terminal Clearances Flue GAS Spill Switch VentingUsing AN Existing Chimney Manufacturers General Venting GuidelinesInstalling the Glowing Embers Installing the LogsetOperating Instructions Lighting InstructionsMaintenance and Technical Trouble ShootingProblem Possible Cause Solution Never USE AN Open Flame for Leak Testing Electrical GAS Line ConnectionOrifice SIZES, Pressure and BTU’S Natural GAS Propane GASInstalling Remote Thermostat or Wall Switch Parts and Accessories Removing or Installation of the BlowerAdjusting the Venturi Fuel ConversionTo the Distributor WarrantyTo the Dealer Parts List Exploded EG28-143 NG EG28-145 LPG EC-019 NG, 020 LPEC-011 EG28-101Installation Data Sheet 29/2002

EG 28 B specifications

The Enviro EG 28 B is an innovative solution in the realm of environmental technology, specifically designed for efficient waste management and energy resource recovery. This advanced equipment stands out in both functionality and sustainability, making it suitable for various applications in municipal and industrial settings.

One of the main features of the Enviro EG 28 B is its robust waste processing capability. The system can handle a diverse range of materials, including organic waste, plastics, and other recyclables. This flexibility allows users to maximize the efficiency of their waste management operations, promoting a circular economy. The unit is designed with a high throughput capacity, enabling it to process large volumes of waste without sacrificing performance.

The Enviro EG 28 B utilizes cutting-edge technologies to optimize every phase of waste treatment. Integrated sensors and automated controls monitor the waste processing in real-time, ensuring that the system operates at peak efficiency. This not only maximizes the recovery of valuable resources but also minimizes energy consumption. The inclusion of advanced sorting mechanisms further enhances the unit's effectiveness, allowing for the precise separation of materials for recycling and composting.

Another characteristic that sets the Enviro EG 28 B apart is its environmentally friendly approach. The equipment is engineered to significantly reduce greenhouse gas emissions throughout its operational lifespan. It employs a closed-loop system that captures and repurposes gases generated during processing, turning potential pollutants into usable energy. This aligns with global sustainability goals and positions the Enviro EG 28 B as a leader in eco-conscious waste management solutions.

Additionally, the Enviro EG 28 B is designed with user-friendliness in mind. The intuitive interface allows for easy operation and maintenance, ensuring that operators can manage the system without extensive training. Moreover, its compact design is adaptable to various locations, allowing for installation in space-constrained environments while maintaining high operational standards.

Overall, the Enviro EG 28 B exemplifies the future of waste management technology, combining efficiency, sustainability, and ease of use. Its innovative features and technologies not only help reduce environmental impact but also provide significant economic benefits to organizations seeking to optimize their resource management practices. As the need for effective waste processing continues to grow, the Enviro EG 28 B stands ready to meet these challenges head-on.
Top Page Image Contents