Lopi 028-S-75-2 owner manual Interior or Exterior Masonry Chimney

Page 18

18

Stove Installation (for qualified installers only)

Interior or Exterior Masonry Chimney

NOTE:

This type of installation requires a UBC approved masonry connector or other method approved by the NFPA 211 standard. See Chimney Connector Requirements on page 11 for further details.

NOTE: The chimney must have a clay tile liner. If it does not, the installation must use a positive connection (full reline). The entire fireplace and chimney must be clean, undamaged, and meet all local building codes (UBC, etc.). Damage must be repaired prior to installation. The chimney must be 15' to 33' tall.

See the section "Stove Placement Requirements" for minimum clearances required.

Min. 18" clearance to ceiling

Clay Liner

This type of installation requires a UBC approved masonry connector or other method approved by the NFPA 211 standard.

Chimney connector sections

See the section "Floor Protection Requirements"

Full Re-Line (recommended)

Make sure the clean-out seals in place.

Figure 17

© Travis Industries

100-01177

4060802

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Leyden Wood Stove Important Information 2IntroductionIntroduction Save Your Bill of SaleTable of Contents Safety Precautions AshesTravis Industries, Inc. grants no warranty, implied or MobileHeating Specifications Features & SpecificationsInstallation Options Features DimensionsStove Installation Considerations Planning The InstallationPreparation for Installation Installation Type ConsiderationsStove Placement Requirements Floor Protection RequirementsClearances Top View Straight Installation Top View Corner InstallationBypass Handle Installation Rear Vent ConfigurationChimney Connector Requirements Chimney Requirements DraftingPerformance Chimney Termination Requirements Outside Air RequirementsAlcove Installation Requirements Minimum Clearance Combustible See below AlcoveMobile Home Requirements Standard Ceiling with a Factory Built Chimney Cathedral Ceiling with a Factory Built ChimneyHearth Stove Positive Connection Hearth Stove Direct ConnectionInterior or Exterior Masonry Chimney Safety Notice Operating Your ApplianceBefore Your First Fire Opening the Doors Bypass Operation Loading Lid OperationStarting a Fire Starting a Top-Down FireAdjusting the Burn Rate Approximate Air Control SettingsAsh Removal Ashpan RemovalOvernight Burn Blower OperationRe-Loading the Stove Normal Operating SoundsSelecting Wood Why Dry Wood is KeyHints for Burning Wood Cutting and StorageBurn Procedure Pictorial Overview Operating Your Appliance Troubleshooting Maintaining Your Appliance Daily Maintenance while stove is in useClean the Glass if necessary Remove Ash if necessaryMonthly Maintenance while appliance is in use Door and Glass InspectionCreosote Formation and Need for Removal Cleaning the Air Duct and Blower if applicable Yearly MaintenanceClean the Combustion Brick Touch Up PaintAdjusting the Bypass Latch Adjusting the Ashpan LatchCleaning the Combustor Area Replacing the Door Gasket DoorReplacing the Glass Replacing the Loading Lid GasketBrick Removal & Replacement Combustor Removal & ReplacementFirebox Parts Years 2 & 3 Coverage Parts & Labor Limited 5 Year WarrantyYear1 Coverage Parts & Labor Years 4 & 5 Coverage Parts & LaborConditions & Exclusions Listing Label Listing LabelRear Blower Installation Optional EquipmentIndex

028-S-75-2 specifications

The Lopi 028-S-75-2 is an innovative and efficient heating solution, designed to provide optimal warmth and comfort in various residential settings. This advanced model stands out due to its superb energy efficiency, making it an ideal choice for homeowners seeking environmentally-friendly heating options without compromising on performance.

One of the main features of the Lopi 028-S-75-2 is its exceptional heating capacity. This unit is engineered to deliver an impressive output, ensuring that even larger spaces can be effectively heated. Its high BTU (British Thermal Unit) output means that the Lopi 028-S-75-2 can quickly warm up a room, making it a reliable option during the colder months.

The technology behind this model incorporates advanced catalytic combustion systems, which enhance efficiency by promoting the complete burning of fuel. This results in reduced emissions, making it a more eco-conscious choice. The inclusion of secondary combustion technology further maximizes heat production, ensuring that more energy is extracted from the fuel used.

Another characteristic that makes the Lopi 028-S-75-2 a standout is its build quality. Constructed from robust materials, this unit is designed to withstand the rigors of daily use while maintaining aesthetic appeal. Its sleek design suits a variety of home interiors, allowing it to blend seamlessly into any décor.

Ease of use is a significant consideration in the design of the Lopi 028-S-75-2. The unit features an intuitive control panel, ensuring straightforward operation. Users can easily adjust settings to match their specific heating needs, providing flexibility and convenience.

Safety features are also a priority with the Lopi 028-S-75-2. It is equipped with built-in safeguards to prevent overheating and ensure safe operation. This gives homeowners peace of mind, knowing that they have a reliable and secure heating source.

Overall, the Lopi 028-S-75-2 combines efficiency, advanced technology, and user-friendly features, making it an excellent choice for anyone looking to invest in a quality heating solution. Whether used in a cozy living room or a spacious family area, this model promises to deliver consistent warmth throughout the winter. Its commitment to performance and sustainability sets it apart in the competitive market of home heating systems.
Top Page Image Contents