Regency P121-NG, P131-NG, P121LC-NG, P121RC-NG Flueing Arrangements Horizontal Terminations

Page 15
Simpson Dura-Vent 4" inner diameter
6-5/8" outer diameter

INSTALLATION

FLUEING ARRANGEMENTS - HORIZONTAL TERMINATIONS

SIMPSON DURA-VENT DIRECT VENT GS SYSTEM (LPG & NG)

The diagram below shows examples of horizontal termination arrangements using one, two, or three 90o elbows (two 45o elbows equal one 90o elbow).

Note:

1) A maximum of three 90o elbows are permitted.

2) Minimum distance between elbows is 1 ft. (305mm).

• Maintain clearances to combustibles as listed on page 9.

•Horizontal flue must be supported every 3 feet.

•Firestops are required at each floor level and whenever passing through a wall.

•Must use optional flue adapter (Part# 510-994) when using Simpson Dura-Vent pipe.

•A vent guard should be used whenever the termination is lower than the specified minimum or as per local codes.

Straight Out Horizontal Flueing

Horizontal Flueing with One (1) 90o Elbow

 

Option

V

H

 

A)

1' (305mm) Minimum

3' (914mm) Maximum

 

B)

2' (610mm) Minimum

6' (1.86m) Maximum

 

C)

3' (914mm) Minimum

9' (2.7m) Maximum

 

D)

4' (1.22m) Minimum

12' (3.6m) Maximum

 

E)

5' (1.5m) Minimum

15' (4.5m) Maximum

 

F)

6' (1.86m) Minimum

17' (5.1m) Maximum

 

With the above options, maximum total pipe length if 37 feet with

 

minimum of 6 feet total vertical and maximum 17 feet total horizontal.

 

Please note minimum 1 foot between 90o elbows is required.

Diagram 1

Diagram 2

Please note the minimum centerline for basic install shown above.

Regency P121/P121LC/P121RC/P131 Zero Clearance Room Sealed Gas Fireplace

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Please Keep These Instructions For Future Reference ManualTo the New Owner CongratulationsTable of Contents Safety Label Save These Instructions InstallationGeneral Safety Information Installation ChecklistP121 See Thru P131 Pier SpecificationsP121LC Left Corner Unit P121RC Right Corner Unit Locating Your GAS Fireplace Combustible Mantels ClearancesP121 See Thru Framing Dimensions Framing and FinishingP121LC Corner Unit P131 Pier P121RC Corner Unit Flueing Introduction Unit Assembly Prior to InstallationTop Standoff Assembly Facing & Finishing RequirementsClearance k in mm Exterior Flue Termination LocationsFlueing Arrangement Horizontal Terminations Simpson DURA-VENT Flueing Components List Simpson DURA-VENT FlueingSimpson DURA-VENT Direct Vent GS System LPG & NG Flueing Arrangements Horizontal TerminationsHorizontal Flueing with Three 3 90o Elbows Horizontal Flueing with Two 2 90o ElbowsFlueing Arrangements Vertical Terminations Vertical Flueing with Three 3 90o Elbows Vertical Flueing with Two 2 90o ElbowsVent GS system Horizontal InstallationsVertical Termination Where the flue will peneInstallation Procedures Offset ChartFor Regency AstroCapTM Direct Flue System Flex Burner Orifice P121/P121LC/P121RC/P131-NG System Data Pilot AdjustmentGAS Line Installation GAS Pipe Pressure Testing3-digit numbers ie are molded into the rear of each log LOG Installation327 Slide Trim into Slot Push trim tight against magnet Glass Door Removal Finishing Trim Louvers & GrillsThermostat Wire Table Remote ControlTerminal Block Location Wiring DiagramOperating Instructions Maintenance Instructions General Flue MaintenanceCopy of the Lighting Plate Instructions Maintenance Installing Valve P121 see Thru Main Assembly Parts ListP131 Pier Main Assembly P121RC Right Corner Main Assembly P121LC Left Corner Main Assembly P121/P121LC/P121RC/P131 Burner Assembly & LOG SET Page Exclusions WarrantyWarranty Lifetime Conditions

P121RC-NG, P131-NG, P121LC-NG, P121-NG specifications

The Regency P131-NG, P121LC-NG, P121RC-NG, and P121-NG are a series of advanced communication devices designed to set new standards in the realm of radio technology, especially for industrial and commercial applications. These devices are engineered to provide reliable performance, exceptional clarity, and robust features that cater to the diverse needs of users in various sectors.

One of the standout features of the Regency P131-NG and its counterparts is their enhanced communication range. Utilizing advanced digital signal processing technology, these radios ensure clear audio transmission even in challenging environments. This capability is crucial for users operating in areas with significant interference or in remote locations, where traditional radios may fail to maintain a stable connection.

The devices also boast a rugged design, tailored for durability and resistance to environmental factors. With an IP67 rating, the P131-NG series is protected against dust and can withstand immersion in water, making it ideal for outdoor use. The robust build quality ensures that these radios can endure the rigors of everyday use in industrial settings.

In terms of user interface, the P121LC-NG and P121RC-NG are equipped with intuitive controls that facilitate ease of use. The large display screen offers clear visibility of channel information and battery status, while the customizable buttons allow users to quickly access their most-used functions. Additionally, these models feature programmable channels, enabling users to tailor their communication needs effectively.

Battery life is another key characteristic of these radios. The devices are designed with energy efficiency in mind, offering extended use between charges. This is complemented by rapid charging technology, which ensures that downtime is minimized, allowing users to stay connected when it matters most.

Additionally, the inclusion of advanced security features is noteworthy. The P131-NG series incorporates encryption capabilities that safeguard sensitive communications, making them an excellent choice for organizations concerned about data security.

Overall, the Regency P131-NG, P121LC-NG, P121RC-NG, and P121-NG stand out in the crowded market of communication devices by offering a combination of superior range, robust construction, user-friendly interfaces, long battery life, and enhanced security features. These radios are poised to meet the demands of a wide array of users, from industrial workers to commercial enterprises, providing reliable communication solutions in any environment.
Top Page Image Contents