Regency P131, P121RC Facing & Finishing Requirements, Unit Assembly Prior to Installation

Page 11

INSTALLATION

FACING & FINISHING REQUIREMENTS

This fireplace is supplied with a 3" metal extension trim above the fireplace. The extension trim may be replaced if the framing is faced with a non- combustible material placed flush with the front and side face of the unit and extending from the top of the unit. (ie. tile, slate, etc.)

UNIT ASSEMBLY

PRIOR TO

INSTALLATION

The 4 Top Standoffs must be correctly positioned and attached to the top before unit is slipped into position.

Top Standoff Assembly

The top standoffs are shipped in a flat position and must be folded into shape and attached.

1) Remove the standoffs from the fireplace top.

2) Take each standoff and bend into the correct shape. Bend up at the bend lines until the screw holes in the standoff and the pre-punched screw holes on the fireplace top line up.

3) Attach the standoff securely to the top with

4 screws per standoff (on opposite cor- ners).

VENTING

INTRODUCTION

The P121-1/P121LC-1/P121RC-1/P131-1 uses the "balanced flue" technology Co Axial system. The inner liner vents products of com- bustion to the outside while the outer liner draws outside combustion air into the combus- tion chamber thereby eliminating the need to use heated room air for combustion and losing warm room air up the chimney.

Note: These flue pipes must not be con-

nected to any other appliance.

The gas appliance and vent system must be vented directly to the outside of the building, and never be attached to a chimney serving a separate solid fuel or gas burning appliance. Each direct vent gas appliance must use it's own separate vent system. Common vent sys- tems are prohibited.

Regency P121-1/P121LC-1/P121RC-1/P131-1 Zero Clearance Direct Vent Gas Fireplace

11

Image 11
Contents Owners Installation Manual To the New Owner Manufactured Mobile Home RequirementsTable of Contents Copy of Safety Decal for P121/P121LC/P121RC/P131 Safety LabelSave These Instructions InstallationGeneral Safety Information Installation ChecklistP121-1 See Thru P131-1 Pier SpecificationsP121LC-1 Left Corner Unit P121RC-1 Right Corner Unit Locating Your GAS Fireplace Combustible Mantels ClearancesP121-1 See Thru P131-1 Pier P121LC-1 / P121RC-1 Corner Unit P121-1 See Thru Framing DimensionsFraming and Finishing P121LC-1 Corner Unit P131-1 Pier P121RC-1 Corner UnitVenting Introduction Unit Assembly Prior to InstallationTop Standoff Assembly Facing & Finishing RequirementsAir supply outlet VentVenting Arrangement Horizontal Terminations Description Simpson DURA-VENT VentingSimpson DURA-VENT Venting Components List Simpson Dura-Vent Direct Vent GSOption Venting Arrangements Horizontal TerminationsHorizontal Venting with Three 3 90o Elbows Horizontal Venting with Two 2 90o ElbowsVenting Arrangements Vertical Terminations Vertical Venting with Three 3 90o Elbows Vertical Venting with Two 2 90o ElbowsHorizontal Installations Set the gas appliance in its desired location. Drop a Vertical TerminationFor Regency AstroCapTM Direct Vent System Flex Installation ProceduresOffset Chart Installation High Elevation GAS Line InstallationPilot Adjustment GAS Pipe Pressure Testing02-80 02-82 02-79 02-81 LOG Installation02-82 02-81 02-81 02-79 02-82 02-8002-80 P121-1 & P131-1 Corner Models Glass Door RemovalFinishing Trim Louvers & GrillsThermostat Wire Table Remote ControlDo not cut the ground terminal off under any circumstances Wiring DiagramOperating Instructions Do not Remove this Instruction Plate 908-017a Maintenance InstructionsGeneral Vent Maintenance Copy of the Lighting Plate InstructionsMaintenance Installing Valve FAN Replacement P121-1 see Thru Main Assembly Parts ListP131-1 Pier Main Assembly P121RC-1 Right Corner Main Assembly P121LC-1 Left Corner Main Assembly P121/P121LC/P121RC/P131-1 Burner Assembly & LOG SET Warranty Lifetime WarrantyInstaller Please complete the following information
Related manuals
Manual 48 pages 21.81 Kb

P121LC, P121, P121RC, P131 specifications

The Regency P121RC, P121, P131, and P121LC are advanced technological innovations in the realm of heating, ventilation, and air conditioning (HVAC) systems. Designed for both residential and commercial applications, these models are known for their efficiency, reliability, and comfort-enhancing features.

The Regency P121RC is particularly notable for its high-efficiency rating, making it a popular choice for environmentally conscious consumers. With advanced heat pump technology, it provides optimal heating and cooling throughout the year, reducing energy consumption while maintaining a consistent indoor climate. The use of environmentally friendly refrigerants further emphasizes its commitment to sustainability.

The P121 model stands out for its cutting-edge smart technology integration. It is equipped with Wi-Fi connectivity, allowing users to control their HVAC systems remotely via a mobile application. This feature not only enhances convenience but also enables energy management, reducing operational costs through effective scheduling and monitoring.

The P131 model caters to larger spaces, thanks to its robust cooling and heating capabilities. It employs a variable-speed compressor that adjusts to the specific demands of the space, ensuring optimal performance while minimizing noise disruption. This model is also compatible with smart home systems, contributing to a seamless integration of technology within modern living environments.

Meanwhile, the P121LC is designed with energy conservation in mind, featuring a dual-stage heating and cooling system. Its advanced airflow technology ensures even distribution of temperature, promoting overall comfort and reducing the risk of hot or cold spots in a room. Like its counterparts, it supports remote operation through smart technology, offering users full control over their indoor climate.

In terms of construction, these models prioritize durability and longevity. They feature robust insulation and high-quality materials, which contribute to their energy efficiency and operational lifespan. The compact design also allows for flexible installation options, making them suitable for various types of spaces.

Overall, the Regency P121RC, P121, P131, and P121LC represent the pinnacle of modern HVAC technology, blending efficiency, innovative features, and user-friendly control options to provide optimal comfort in any setting. As homeowners and businesses increasingly prioritize sustainability and energy management, these models are set to play a vital role in achieving a more comfortable and eco-friendly future.