Regency P121RC, P121LC, P131 installation manual Clearances, Combustible Mantels

Page 9

INSTALLATION

CLEARANCES

The clearances listed below are Minimum distances unless otherwise stated (refer to diagrams on page 8):

Clearance to Combustibles from:

Back

0"

(0mm)

Side

0"

(0mm)

Floor

0"

(0mm)

CAUTION REQUIREMENTS: The top, back and sides of the fireplace are defined by standoffs. The metal ends of the standoffs may NOT be recessed into combus- tible construction.

Determine the total thickness of the finished floor (eg. tile, carpet, slate) to allow the finished surface to be flush with the base of the unit.

Ceiling Height from Floor 72" (1828mm)

Mantel Height from Base of Unit:

39" min. (991mm)

Horizontal

Vent Clearances:

Top

2-1/2"(64mm)

Side

1-1/2"(38mm)

Bottom

1-1/2"(38mm)

WARNING:

Fire hazard is an extreme risk if these clearances (air space) to combustible materials are not adhered to. It is of greatest importance that this fireplace and vent system be installed only in accordance with these

instructions.

Vertical Vent Clearances 1-1/4" (32mm)

COMBUSTIBLE MANTELS

Because of the extreme heat this fireplace emits, the mantel clearanc- es are critical. Combustible mantel clearances from top of unit are shown in Diagram to the right.

Note: A non-combustible mantel may be installed at a lower height if the framing is made of metal studs covered with a non- combustible board.

This drawing is to scale at 1:6 (one inch = 6 inches)

Mantel can be installed anywhere in shaded area or higher using this scale.

Caution: Ensure the paint that is used on the mantel and the facing is "heat resistant" or the paint may discolour.

*If the 3" metal extension trim is removed it must be replaced with a 3" non- combustible material.

Mantel Clearances

Regency P121-1/P121LC-1/P121RC-1/P131-1 Zero Clearance Direct Vent Gas Fireplace

9

Image 9
Contents Owners Installation Manual To the New Owner Manufactured Mobile Home RequirementsTable of Contents Copy of Safety Decal for P121/P121LC/P121RC/P131 Safety LabelGeneral Safety Information InstallationInstallation Checklist Save These InstructionsP121-1 See Thru P131-1 Pier SpecificationsP121LC-1 Left Corner Unit P121RC-1 Right Corner Unit Locating Your GAS Fireplace Combustible Mantels ClearancesFraming and Finishing P121-1 See Thru Framing DimensionsP121LC-1 Corner Unit P131-1 Pier P121RC-1 Corner Unit P121-1 See Thru P131-1 Pier P121LC-1 / P121RC-1 Corner UnitTop Standoff Assembly Unit Assembly Prior to InstallationFacing & Finishing Requirements Venting IntroductionAir supply outlet VentVenting Arrangement Horizontal Terminations Simpson DURA-VENT Venting Components List Simpson DURA-VENT VentingSimpson Dura-Vent Direct Vent GS DescriptionOption Venting Arrangements Horizontal TerminationsHorizontal Venting with Three 3 90o Elbows Horizontal Venting with Two 2 90o ElbowsVenting Arrangements Vertical Terminations Vertical Venting with Three 3 90o Elbows Vertical Venting with Two 2 90o ElbowsHorizontal Installations Set the gas appliance in its desired location. Drop a Vertical TerminationInstallation Procedures Offset ChartFor Regency AstroCapTM Direct Vent System Flex Installation Pilot Adjustment GAS Line InstallationGAS Pipe Pressure Testing High Elevation02-82 02-81 LOG Installation02-81 02-79 02-82 02-80 02-80 02-82 02-79 02-8102-80 Finishing Trim Glass Door RemovalLouvers & Grills P121-1 & P131-1 Corner ModelsThermostat Wire Table Remote ControlDo not cut the ground terminal off under any circumstances Wiring DiagramOperating Instructions General Vent Maintenance Maintenance InstructionsCopy of the Lighting Plate Instructions Do not Remove this Instruction Plate 908-017aMaintenance Installing Valve FAN Replacement P121-1 see Thru Main Assembly Parts ListP131-1 Pier Main Assembly P121RC-1 Right Corner Main Assembly P121LC-1 Left Corner Main Assembly P121/P121LC/P121RC/P131-1 Burner Assembly & LOG SET Warranty Lifetime WarrantyInstaller Please complete the following information
Related manuals
Manual 48 pages 21.81 Kb

P121LC, P121, P121RC, P131 specifications

The Regency P121RC, P121, P131, and P121LC are advanced technological innovations in the realm of heating, ventilation, and air conditioning (HVAC) systems. Designed for both residential and commercial applications, these models are known for their efficiency, reliability, and comfort-enhancing features.

The Regency P121RC is particularly notable for its high-efficiency rating, making it a popular choice for environmentally conscious consumers. With advanced heat pump technology, it provides optimal heating and cooling throughout the year, reducing energy consumption while maintaining a consistent indoor climate. The use of environmentally friendly refrigerants further emphasizes its commitment to sustainability.

The P121 model stands out for its cutting-edge smart technology integration. It is equipped with Wi-Fi connectivity, allowing users to control their HVAC systems remotely via a mobile application. This feature not only enhances convenience but also enables energy management, reducing operational costs through effective scheduling and monitoring.

The P131 model caters to larger spaces, thanks to its robust cooling and heating capabilities. It employs a variable-speed compressor that adjusts to the specific demands of the space, ensuring optimal performance while minimizing noise disruption. This model is also compatible with smart home systems, contributing to a seamless integration of technology within modern living environments.

Meanwhile, the P121LC is designed with energy conservation in mind, featuring a dual-stage heating and cooling system. Its advanced airflow technology ensures even distribution of temperature, promoting overall comfort and reducing the risk of hot or cold spots in a room. Like its counterparts, it supports remote operation through smart technology, offering users full control over their indoor climate.

In terms of construction, these models prioritize durability and longevity. They feature robust insulation and high-quality materials, which contribute to their energy efficiency and operational lifespan. The compact design also allows for flexible installation options, making them suitable for various types of spaces.

Overall, the Regency P121RC, P121, P131, and P121LC represent the pinnacle of modern HVAC technology, blending efficiency, innovative features, and user-friendly control options to provide optimal comfort in any setting. As homeowners and businesses increasingly prioritize sustainability and energy management, these models are set to play a vital role in achieving a more comfortable and eco-friendly future.