MAINTENANCE
VALVE TRAY REPLACEMENT
1)Shut off the gas supply to the unit.
2)Remove the right side mesh by gathering the mesh together and lifting the curved end of the rod up and out of the bracket located on the top right of the glass frame.
Now slide the straight end of the rod out from the bracket located on the middle inside top of the outer shell. Repeat for left side.
4) Remove the glass door. | 5) | Remove the log set. |
a. Release the 2 door latches on the left | 6) | Remove the brick panels. |
and right side at the top of the firebox. | 7) | Remove the grate by undoing the 4 screws, |
|
2 on each side.
Latch Location
Latch
Grate
8) Remove the burner tube by removing the 2 screws.
b.Swing the door out from the top and release the hinge on the left side of the door and lift out.
MAINTENANCE
Right Side Rod with Screen Removed
3)Remove the front cover plate by lifting up off of the pins on the left and right side of the firebox.
Burner Tube
9) Remove the rear log stand by removing the 4 screws.
Rear Log Stand
HingeDoor
c.Place the door on a soft surface to prevent scratching.
Front Cover Plate | Right Side Pin Shown |
42 | Regency® |