Royal Consumer Information Products G31 manual Installation of the Appliance

Page 11

Installation of the Appliance

Check that the chimney conforms to the required specifications as previously stated. Examine the condition and carry out any remedial work as necessary, if the flue has been used for solid fuel it should be swept and a smoke test carried out to check that satisfactory smoke clearance has been established. If all the smoke is not drawn into the flue, pre-heat the flue with a blowtorch or similar and re-check. If there is any uncertainty examine for the cause and if necessary seek expert advice.

Gas Supply

BEFORE COMMENCING WORK, TURN OFF ANY APPLIANCES THAT ARE FED BY THE SUPPLY AND ISOLATE THE GAS SUPPLY BY TURNING OFF AT THE SUPPLY

The gas connection to this appliance is made with 8mm o/d rigid or semi rigid tube to a pressure test elbow situated on the L/H side of the burner as shown in Fig 10. It is advisable to provide a means of isolating the gas supply to the appliance for servicing using the isolation cock supplied. Provision is made i.e. knock-out blanks for entry into the box in both L&R hand rear corners and at the L&R hand sides although for ease of installation, it is recommended that the gas feed is made from the left hand side. Any pipe used under the tray must be in rigid tube such as bundy, suitable pieces of bundy are included in the fitting kit to assist the installer.

Where a concealed gas supply is used, the installer is reminded of the requirements of BS 6891 - 1988 dealing with enclosed pipes. The Standard requires that when a gas pipe is fed through a wall, the pipe should be enclosed in a tight sleeve to protect against failure caused by movement and shall be constructed to prevent passage of gas either between the pipe and sleeve or sleeve and wall.

Where a gas supply pipe enters the box in any of the positions stated, the hole around the pipe should be sealed with a silicone sealant or similar to prevent ingress of air into the flue. Permanent sealant e.g. fire cement etc. should not be used as these would prevent removal of the firebox if so required.

Dismantling the fire prior to Installing.

It will be necessary to dismantle the burner from the firebox before installing the box in the opening.

To remove the burner, unscrew the two screws on the front flange of the burner, lift and pull forward.

Important

THE RESTRICTOR PLATE MUST NOT BE USED WITH 5" OR PRE-CAST FLUES

The restrictor is for use with 7in (175mm) diameter flues only.

The appliance is supplied without a Flue Restrictor fitted in position i.e. suitable for 5" or pre-cast flues.

The restrictor plate is fitted prior to installing the firebox and is held in position with the two self-tap screws provided. See Fig 9

Page 5

Page 10 Page 12
Image 11
Page 10 Page 12
Contents 167$1$5 Technical Data To light the appliance Dismantling the Fire Bed for CleaningClearance to Side Clearance to ShelvesRelaying the Coal Bed Cleaning the Front of the ApplianceSpares and Service Page Registration Record Servicing Instructions Description Important Notes Installation Regulation and RequirementsClearance to Side timber surrounds etc Contents Check ListFire Surround and Opening Requirements Dismantling the fire prior to Installing Installation of the ApplianceChecking Operation of Fire Installing the Appliance in PositionLaying the Coal Bed Advise that Spillage CheckGeneral Removal of Debris or Soot Deposits Page Page Page Page Page Page No Figures 13 & 15 On this Registration Record

G31 specifications

The Royal Consumer Information Products G31 is a versatile electronic device designed to enhance productivity and streamline various tasks for users. This model is particularly popular among consumers who seek a reliable solution for their office and personal needs. The G31 is a multi-functional device that incorporates several well-thought-out features, making it an essential addition to any workspace.

One of the standout features of the G31 is its ability to function as both a printer and a scanner. This dual functionality not only saves space but also increases efficiency by allowing users to complete multiple tasks without needing separate devices. The print quality is impressive, offering crisp and clean output, whether printing documents, images, or photos. The scanning capability is equally remarkable, with high-resolution scans that preserve the details of original documents.

The G31 also employs advanced thermal printing technology, which delivers fast and reliable performance. This technology ensures that prints come out quickly without compromising on quality, which is especially valuable in busy environments. Additionally, the device supports wireless connectivity, allowing users to print and scan directly from their smartphones or tablets. This feature is particularly advantageous in today's mobile-driven world, where convenience and accessibility are key.

Another notable characteristic of the G31 is its user-friendly interface. The device comes equipped with a clear display screen that simplifies navigation through various functions and settings. This intuitive design helps users manage their tasks with ease, minimizing the learning curve for new users. The machine also includes one-touch buttons for frequently used functions, further enhancing operational efficiency.

Furthermore, the Royal Consumer Information Products G31 features energy-saving capabilities that contribute to its eco-friendly design. It automatically enters a low power mode after periods of inactivity, reducing energy consumption and helping to lower utility costs for consumers.

The G31 also prioritizes document security, offering features that allow users to protect sensitive information. With password protection options and secure print functionalities, users can manage their documents confidently, knowing their information is safeguarded.

In summary, the Royal Consumer Information Products G31 combines functionality and user-friendly design with advanced technology, making it an ideal choice for individuals and businesses alike. Its multi-functional capabilities, wireless connectivity, energy-efficient operations, and security features make it a standout model in the realm of consumer electronic devices.
Top Page Image Contents