Wayne 3514, 3014, 3018DLX user manual Important Safety Instructions

Page 29

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of severe injury or death:

Before you proceed, please thoroughly read the safety rules on page 2 and the following operating instructions. Operate only when opener is properly adjusted and the door is visible and unobstructed.

READ AND FOLLOW ALL INSTRUCTIONS.

Always keep moving door in sight and away from people and objects, until it is completely closed. NO ONE SHOULD CROSS THE PATH OF A MOVING DOOR.

Never let children operate or play with door controls. Keep remote control away from chil- dren.

NEVER GO UNDER A STOPPED, PARTIALLY OPEN DOOR.

KEEP GARAGE DOORS PROPERLY BAL- ANCED. See owner’s manual. An improperly balanced door could cause severe injury or death. Have a qualified service person make repairs to cables, spring assemblies and other hardware.

If possible, use the emergency release only when the door is closed. Use caution when using this release with the door open. Weak or broken springs may cause the door to fall rapidly, causing serious injury or death.

Test door opener monthly. The garage door MUST reverse on contact with a 1 inch high solid test object on the floor. If adjusting ei- ther the force or the limit of travel, retest the door opener. Failure to adjust the opener properly may cause severe injury of death.

Test door opener monthly. Open door must not close and closing door must open if Infra- red Safety System is obstructed by 6” High object, using test procedure described in Step 29.

SAVE THESE INSTRUCTIONS.

IMPORTANT—MESURES DE SÉCURITÉ

AVERTISSEMENT—POUR RÉDUIRE LES RISQUES DE BLESSURES MORTELLES

Avant de commencer, veuillez lire attentivement les règles de sécurité, page 3 et les instructions suivanres. Faire fonc- tionner uniquement lorsque l’ouvre-porte est correctement réglé et que la port est visible et sans obstacle.

LISEZ CETTE NOTICE ET CONFORMEZ-VOUS AUX INSTRUCTIONS.

NE LAISSEZ JAMAIS LES ENFANTS MANOEU- VRER LES COMMANDES DE LA PORTE. NE LAISSEZ PAS LA TÉLÉCOMMANDE À PORTÉE DES ENFANTS.

SURVEILLEZ LA COURSE DE LA PORTE JUS- QU'Á CE QUE CETTE DERNIÈRE SOIT COM- PLETEMENT FERMÉE EN VEILLANT A TENIR Á L’ÉCART TOUTE PERSONNE ET TOUT OBJET AVOISINANT. IL NE FAUT JAMAIS PASSER EN DESSOUS D’UNE PORTE EN MOUVEMENT.

VÉRIFIEZ LE FONCTIONNEMENT DE L’OUVRE PORTE UNE FOIS PAR MOIS. LE SENS DE LA COURSE DOIT S’INVERSER LORSQUE LA PORTE ENTRE EN CONTACT AVEC UN OBJET D’UNE HAUTEUR DE 1 PO POSÉ SUR LE SOL VÉRIFIEZ Á NOUVEAU L’OUVRE-PORTE APRES TOUT RÉGLAGE DE LA FORCE DE DÉ- CLENCHEMENT OU DU SEUIL DE FIN DE COURSE. UN REGLAGE INCORRECT DE L’OUVRE-PORTE PEUT CAUSER DES BLES- SURES MORTELLES.

DANS LA MESURE DU POSSIBLE, NE DÉCLEN- CHEZ LE DISPOSITIF DE DÉSACCOUPLEMENT QUE LORSQUE LA PORTE EST FERMÉE. USEZ DE PRUDENCE SI VOUS DÉCLENCHEZ LE DISPOSITIF LORSQUE LA PORTE EST OUVERTE ; UN RES- SORT AFFAIBLI OU CASSÉ PEUT ENTRAÎNER UNE DESCENTE BRUTALE DE LA PORTE ET CAUSER DES BLESSURES MORTELLES.

ASSUREZ-VOUS QUE LA PORTE DE GARAGE EST CORRECTEMENT ÉQUILIBRÉE. UNE PORTE MAL ÉQUILIBRÉE PEUT CAUSER DES BLESSURES GRAVES. CONFINEZ LA RÉPARATION DES CÂ- BLES, DES RESSORTS, ET DE TOUT AUTRE ÉLÉ- MENT Á UN TECHNICIEN QUALIFIÉ.

VÉRIFIER L’OUVRE-PORTE UNE FOIS PAR MOIS. SI LES SYSTÈME PHOTOÉLECTRIQUE EST BLOQUÉ PAR UN OBJET DE PLUS DE 6 PO X 12 PO, LA PORTE OUVERTE NE DOIT PAS SE FERMER ET LA PORTE SE FERMANT DOIT S’OUVRIR. VÉRIFIER CELA EN UTILISANT LA VÉRIFICATION DÉCRITE Á L’ÉTAPE 29.

CONSERVEZ CES INSTRUCTIONS

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Owner Installation Important Installation Instructions Page Before Starting FeaturesDoor Test One Door Tests Before StartingTools You’ll Need Part Identification Hardware Identification Step One Rail Assembly Rail AssemblyStep Three Mounting Front Rail Assembly Step Two Trolley AlignmentStep Six Rail Assembly Alignment Step Four Setting The ChainStep Five Setting The Chain Latch Assembly Positioning and Installing Front Wall Bracket Attaching Motor Power Head Unit to RailMounting Motor End of Opener Attach Unit to Front Wall BracketPositioning the Motor End of Operator Mounting Door Bracket Installing LightInstalling Wired Wall Station if included Install Entrapment Warning Label Installing Deluxe Wireless Wall Station if includedInstall Wireless Infrared Safety Sensor Install Wireless Infrared Safety Sensor BracketInstall Wired Infrared Safety Sensor Wall Mounting Brackets Connecting Wired Infrared Safety Sensor to Opener Install Wiring for Wired Infrared Safety SensorConnecting Electrical Power Mount Wired Infrared Safety SensorsChanging Wireless Wall Station Code Wireless Wall Station Security Code Change and ProgrammingAlignment of the Wireless Infrared Safety Sensors Changing the Transmitter Code Alignment of the Wired Infrared Safety SensorsTwo Button Transmitter Security Code Change and Programming Programming Transmitter to Power Head UnitSetting Trolley Close Position Connecting Cushion Arm to TrolleyIMPORTANT! Test Contact Obstruction Sensing Feature Connecting Door Arm to DoorInfrared Safety Sensor Obstruction Test Setting Door Opening TravelInstalling Wireless Keyless Entry If Included Programming Wireless Keyless Entry If IncludedAdjustment # 1 Opening and Closing Force AdjustmentsAdjustment # 3 Positive Mechanical Door Lock Adjustment # 2 Contact Obstruction Sensing Closing DirectionImportant Safety Instructions Operation of Your Opener HOW to Operate the Wireless Keyless Entry if IncludedOpener Power Head Controls HOW to Operate the Wireless Wall Station If IncludedPage Once a Year Once a MonthTwice a Year Trouble Shooting Section Parts Breakdown Rail Assembly All Models Description Per Unit # Per Unit Classicdrive Accessories Pre-drill a 5/64 pilot Hole 3/4 deep Cut Template to Aid in Keyless Entry Installation See StepLimited Lifetime Warranty Questions?

3514, 3014, 3018, 3018DLX specifications

Wayne 3014, 3018, 3018DLX, and 3514 are a series of innovative fuel dispensers designed to cater to the evolving needs of the retail fueling industry. These models embody advanced engineering, reliability, and efficiency, making them ideal solutions for gas station operators looking to enhance their service offerings.

The Wayne 3014 series is characterized by its compact design, making it a perfect fit for locations with space constraints. It features a user-friendly interface, which allows for easier interaction for both attendants and customers. The sleek and modern look of the 3014 gives stations a contemporary feel while maintaining durability against the elements.

The 3018 model builds on the robust foundation of the 3014 but adds additional features for increased throughput. With capabilities to handle multiple products, the 3018 allows for various fuel types to be dispensed efficiently, catering to the diverse needs of customers. The model is equipped with advanced metering technologies, ensuring accurate measurement and reducing loss through evaporation or spillage.

For those seeking a more premium option, the 3018DLX stands out with its enhanced features and aesthetics. It offers an integrated payment system, supporting both card and mobile payments, which vastly improves transaction speed and customer satisfaction. The dispenser is also designed with a customizable interface that allows operators to promote special offers or loyalty programs directly on the screen.

The Wayne 3514 takes technology a notch higher, incorporating robust software support that enables real-time data analytics. This feature allows station owners to monitor sales trends and inventory levels efficiently, leading to optimized operations and better decision-making. The 3514 also supports future upgrades, ensuring that the infrastructure can adapt as technology evolves.

All these models prioritize safety and regulatory compliance, featuring advanced leak detection systems and secure payment options. Additionally, they are built to withstand the most challenging environments, reducing downtime and maintenance costs.

In summary, the Wayne 3014, 3018, 3018DLX, and 3514 are more than just dispensers; they represent the future of fueling technology. With their focus on user experience, adaptability, and operational efficiency, these models are set to redefine fuel dispensing in the retail sector. Achieving success in a competitive market is easier with equipment designed to deliver outstanding performance and reliability.
Top Page Image Contents