Vector VEC049C owner manual Protective Features, LOW Battery Alarm

Page 12

Figure 6 – Battery

Operating Time

For example, as shown in FIGURE 6, using a 400 amp hour battery (batteries), if the average power usage will be 1000 watts, the operating time will be about 150 minutes. A larger capacity battery will deliver more operating time between recharges.

NOTE: The manufacturer recommends conservative estimates when selecting a battery. More amp hours will deliver a reserve capacity, and a larger capacity battery will not be subject to deep discharges. Ideally, the number of amp hours (AH) you expect to use should be less than 50% of the battery’s rated capacity.

4.4 PROTECTIVE FEATURES

LOW BATTERY ALARM:

An audible alarm will sound when:

1.The 12 VDC power supply voltage drops down to 10.6 volts. This indicates that the battery needs to be charged or there is an excessive voltage drop between the battery power source and the inverter.

NOTE: It is normal for the alarm to sound when the inverter is being connected to, or disconnected from, a 12VDC-power source. This does NOT indicate a problem. However, if this alarm sounds continuously, discon- tinue inverter operation and charge the battery before resuming operation. If the voltage drops to 10.0VDC, the inverter will automatically shut down.

If the low voltage alarm sounds when the battery is fully-charged, refer to the troubleshooting table for possible causes and remedies. (Pages 19-20)

CIRCUIT PROTECTION: The inverter has electronic circuit protection against overload or short circuit conditions.

WARNING: If turning the front panel mounted switch OFF then ON does not reset the inverter, DO NOT ATTEMPT TO OPEN THE INVERTER. Opening the inverter, for any reason, will void the war- ranty. The unit must be returned to Vector Manufacturing, Ltd. for test- ing and repair by professional factory technicians.

12

Image 12
Contents Maxx Ssttm Important Safety Information Read ALL Instructions Before Using this Power InverterNo USER-SERVICEABLE Components Inside Important Cable InformationContents Introduction Basic Tour of the Maxx SST Model InverterMaxx SST Safety Features BUILT-IN Automatic Safety Features IncludeAppliance Cautions Uninterruptible Power Supply UPS Inverter ApplicationsTheory of Operation Modified Square Wave and Sine Wave ComparisonPower Requirements OperationAppliance Determining Battery Size Battery Operating TimeProtective Features LOW Battery AlarmInstallation Input Power RequirementsOperating Environment Installation Sequence Test Procedure Permanent InstallationQuick Operational Checkout or Emergency USE YOU will NeedPreliminary Installation Notes Inverter DC cables and fuse installation are as followsDo not connect this wire to the negative DC input terminal Specifications Power Inverter ModelService & Parts TroubleshootingCommon Problems Power Tools and Microwave Ovens WON’T StartMaintenance Troubleshooting GuideWarranty Vector 2 Year Limited Warranty Program

VEC049C specifications

The Vector VEC049C is a sophisticated and portable power inverter designed for rugged automotive and emergency applications. This inverter converts 12V DC battery power into a stable 120V AC power source, making it ideal for powering a variety of electronic devices while on the go. It serves as an essential tool for outdoor enthusiasts, travelers, and those in need of backup power solutions during emergencies.

One of the main features of the VEC049C is its robust construction, which ensures durability in challenging environments. This inverter is equipped with multiple output options, including standard AC outlets as well as USB ports, catering to a wide array of devices such as laptops, smartphones, and small appliances. Its capacity to deliver up to 400 watts of continuous power makes it suitable for charging devices or running equipment like lights and fans.

The Vector VEC049C incorporates advanced technology to enhance both performance and safety. The unit features built-in protection mechanisms against overload, short-circuit, and over-temperature, providing peace of mind during operation. Furthermore, the inverter employs a modified sine wave output, which is often sufficient for less sensitive electronics and ensures efficient energy conversion.

The design of the VEC049C is both compact and lightweight, allowing for easy transport and storage. Users can conveniently stow it in their vehicle or carry it in a backpack, making it a practical option for road trips, camping adventures, and outdoor activities. The unit can easily be plugged into a car’s 12V outlet, allowing for easy access to power whenever it's needed.

In terms of user-friendliness, the Vector VEC049C features an LED status indicator that provides real-time information about the power condition and operation status. This usability aspect is crucial for individuals who may not have technical backgrounds but require reliable power solutions.

Overall, the Vector VEC049C stands out for its combination of portability, safety features, and versatility. With its capacity to bridge the gap between 12V DC and 120V AC power needs, this inverter is an invaluable asset for anyone seeking reliable energy solutions in a mobile format. Whether on a road trip, at a campsite, or during a power outage, the VEC049C ensures that essential devices remain operational and accessible.