Vector VEC049C owner manual Maintenance, Troubleshooting Guide

Page 20

8.2 TROUBLESHOOTING GUIDE

TROUBLE/ INDICATION

POSSIBLE CAUSE

SUGGESTED REMEDY

No AC output –

DC input below

Recharge or replace

red LED lit

10 volts

battery

 

 

 

No AC output –

Excessive appliance

Reduce load-wait for

red LED lit

load-thermal shutdown

inverter to cool. Turn off

Low battery alarm

Bad connection

Tighten all DC

sounds continuously

or wiring

connections

Low battery

Low battery voltage

Recharge battery

alarm sounds

 

Remove load from

 

 

inverter while recharging

 

 

battery

Motorized power tool

Excessive start-up load

Rock the on/off switch

won’t start

 

several times. If appliance

 

 

does not start, then

 

 

appliance will not work

 

 

with inverter

Motorized power tool

Purely inductive load

Make the load not purely

does not operate at

 

inductive. Operate an

correct speed

 

incandescent lamp at

 

 

same time as motor

Television/radio

Snow in picture, buzz

Keep inverter and

interference

in speaker

antenna distant from

 

 

each other. Use shielded

 

 

antenna cable. Connect

 

 

antenna to amplifier and

 

 

ground inverter case

 

 

 

9.0MAINTENANCE

Inverters require minimal maintenance. However, for optimum performance, per- form the following:

1.Turn off the inverter using the front panel on/off switch.

2.Disconnect the inverter by removing the DC power fuse.

3.Check and tighten all electrical connections, including the ground.

4.Using a non-metallic vacuum cleaner hose, vacuum the fan area and other air slots.

5.Clean any dirt and dust from the outside of the unit with a damp cloth.

6.Reconnect the fuse and resume operation

20

Image 20
Contents Maxx Ssttm Important Safety Information Read ALL Instructions Before Using this Power InverterNo USER-SERVICEABLE Components Inside Important Cable InformationContents Introduction Basic Tour of the Maxx SST Model InverterMaxx SST Safety Features BUILT-IN Automatic Safety Features IncludeAppliance Cautions Uninterruptible Power Supply UPS Inverter ApplicationsTheory of Operation Modified Square Wave and Sine Wave ComparisonPower Requirements OperationAppliance Determining Battery Size Battery Operating TimeProtective Features LOW Battery AlarmOperating Environment InstallationInput Power Requirements Installation Sequence Test Procedure Permanent InstallationQuick Operational Checkout or Emergency USE YOU will NeedPreliminary Installation Notes Inverter DC cables and fuse installation are as followsDo not connect this wire to the negative DC input terminal Specifications Power Inverter ModelService & Parts TroubleshootingCommon Problems Power Tools and Microwave Ovens WON’T StartMaintenance Troubleshooting GuideWarranty Vector 2 Year Limited Warranty Program

VEC049C specifications

The Vector VEC049C is a sophisticated and portable power inverter designed for rugged automotive and emergency applications. This inverter converts 12V DC battery power into a stable 120V AC power source, making it ideal for powering a variety of electronic devices while on the go. It serves as an essential tool for outdoor enthusiasts, travelers, and those in need of backup power solutions during emergencies.

One of the main features of the VEC049C is its robust construction, which ensures durability in challenging environments. This inverter is equipped with multiple output options, including standard AC outlets as well as USB ports, catering to a wide array of devices such as laptops, smartphones, and small appliances. Its capacity to deliver up to 400 watts of continuous power makes it suitable for charging devices or running equipment like lights and fans.

The Vector VEC049C incorporates advanced technology to enhance both performance and safety. The unit features built-in protection mechanisms against overload, short-circuit, and over-temperature, providing peace of mind during operation. Furthermore, the inverter employs a modified sine wave output, which is often sufficient for less sensitive electronics and ensures efficient energy conversion.

The design of the VEC049C is both compact and lightweight, allowing for easy transport and storage. Users can conveniently stow it in their vehicle or carry it in a backpack, making it a practical option for road trips, camping adventures, and outdoor activities. The unit can easily be plugged into a car’s 12V outlet, allowing for easy access to power whenever it's needed.

In terms of user-friendliness, the Vector VEC049C features an LED status indicator that provides real-time information about the power condition and operation status. This usability aspect is crucial for individuals who may not have technical backgrounds but require reliable power solutions.

Overall, the Vector VEC049C stands out for its combination of portability, safety features, and versatility. With its capacity to bridge the gap between 12V DC and 120V AC power needs, this inverter is an invaluable asset for anyone seeking reliable energy solutions in a mobile format. Whether on a road trip, at a campsite, or during a power outage, the VEC049C ensures that essential devices remain operational and accessible.