Vector VEC049C owner manual Service & Parts, Troubleshooting, Common Problems

Page 19

7.0SERVICE & PARTS

For service on the inverters, contact the Technical Support Department at:

VECTOR MANUFACTURING, LTD

4140 S.W. 28th Way • Ft. Lauderdale, Florida 33312

Tel. (954) 584-4446 • Fax (954) 584-5556Toll-free: (866) 584-5504

8.0TROUBLESHOOTING

8.1COMMON PROBLEMS:

POWER TOOLS AND MICROWAVE OVENS WON’T START

Read the information panel on each power tool carefully to accurately determine the tool’s input wattage. The wattage output is sufficient to operate most power tools and microwave ovens, but remember, the power needed to start the power tool may be as much as 2 to 6 times its continuous wattage requirements.

"BUZZING" SOUND IN AUDIO SYSTEMS AND/OR SNOW IN TVS Inverters are shielded to minimize interference with TV signals. Ensure that the TV antenna provides an adequate "snow free" signal and the antenna cable is high quality and shielded without the inverter operating. The problem may not be with the inverter. However, in some cases, some interference may be visible, particularly with weak TV signals. Try the following corrective measures:

Position the TV and antenna further away from the inverter, if it is the cause of interference. Adjust the antenna, or use commercial cable hook-up (if possi- ble) for best results

Do not operate high-power appliances or tools when you are watching TV

Make sure inverter's case is properly grounded as described in section 5.5.2 item 16

INVERTER SHUTS DOWN OR BATTERY FUSE OPENS

Inverter will continuously deliver rated watts (FIGURE 6) of AC power continuously and will deliver rated peak watts ; after which, the inverter may shut itself down, or the battery fuse will open, due to overload or excessive load demand on start-up. Replace battery fuse, if opened. Allow the inverter to cool for at least 15 minutes before attempting to start or run a high current draw device. Reduce the load on the inverter to its maximum rated output power.

19

Image 19
Contents Maxx Ssttm Important Cable Information Important Safety InformationRead ALL Instructions Before Using this Power Inverter No USER-SERVICEABLE Components InsideContents Basic Tour of the Maxx SST Model Inverter IntroductionBUILT-IN Automatic Safety Features Include Maxx SST Safety FeaturesAppliance Cautions Inverter Applications Uninterruptible Power Supply UPSModified Square Wave and Sine Wave Comparison Theory of OperationOperation Power RequirementsAppliance Battery Operating Time Determining Battery SizeLOW Battery Alarm Protective FeaturesInput Power Requirements InstallationOperating Environment Installation Sequence YOU will Need Test ProcedurePermanent Installation Quick Operational Checkout or Emergency USEInverter DC cables and fuse installation are as follows Preliminary Installation NotesDo not connect this wire to the negative DC input terminal Power Inverter Model SpecificationsPower Tools and Microwave Ovens WON’T Start Service & PartsTroubleshooting Common ProblemsTroubleshooting Guide MaintenanceVector 2 Year Limited Warranty Program Warranty

VEC049C specifications

The Vector VEC049C is a sophisticated and portable power inverter designed for rugged automotive and emergency applications. This inverter converts 12V DC battery power into a stable 120V AC power source, making it ideal for powering a variety of electronic devices while on the go. It serves as an essential tool for outdoor enthusiasts, travelers, and those in need of backup power solutions during emergencies.

One of the main features of the VEC049C is its robust construction, which ensures durability in challenging environments. This inverter is equipped with multiple output options, including standard AC outlets as well as USB ports, catering to a wide array of devices such as laptops, smartphones, and small appliances. Its capacity to deliver up to 400 watts of continuous power makes it suitable for charging devices or running equipment like lights and fans.

The Vector VEC049C incorporates advanced technology to enhance both performance and safety. The unit features built-in protection mechanisms against overload, short-circuit, and over-temperature, providing peace of mind during operation. Furthermore, the inverter employs a modified sine wave output, which is often sufficient for less sensitive electronics and ensures efficient energy conversion.

The design of the VEC049C is both compact and lightweight, allowing for easy transport and storage. Users can conveniently stow it in their vehicle or carry it in a backpack, making it a practical option for road trips, camping adventures, and outdoor activities. The unit can easily be plugged into a car’s 12V outlet, allowing for easy access to power whenever it's needed.

In terms of user-friendliness, the Vector VEC049C features an LED status indicator that provides real-time information about the power condition and operation status. This usability aspect is crucial for individuals who may not have technical backgrounds but require reliable power solutions.

Overall, the Vector VEC049C stands out for its combination of portability, safety features, and versatility. With its capacity to bridge the gap between 12V DC and 120V AC power needs, this inverter is an invaluable asset for anyone seeking reliable energy solutions in a mobile format. Whether on a road trip, at a campsite, or during a power outage, the VEC049C ensures that essential devices remain operational and accessible.