Vector VEC049C Quick Operational Checkout or Emergency USE, YOU will Need, Test Procedure

Page 15

5.4 QUICK OPERATIONAL CHECKOUT OR EMERGENCY USE

YOU WILL NEED:

One heavy-duty jumper cable set with specified AWD wire rating (See Page 18)

One fully-charged automobile battery

A common, slip joint pliers for loosening and tightening terminal nuts

TEST PROCEDURE:

1.Remove the plastic terminal covers and terminal nuts.

2.Identify the positive and negative terminals on the 12VDC battery and identify the positive and negative terminals on the inverter.

3.Using the set of heavy-duty jumper cables, attach one red cable clamp to the (+) terminal bolt and one black cable clamp on the (–) terminal bolt.

4.Connect the clamps on the other ends of the jumper cables to the corresponding positive (+) and negative (–) terminals on the 12VDC vehicle battery. There may be some minor sparking observed.

5.Turn the inverter power switch on.

6.Plug in a lamp with a 100 watt light bulb and switch the lamp on. If the lamp works normally, the inverter is functioning properly and you can proceed to a permanent installation or continue to use the inverter with low wattage appliances. If the lamp does not light or does not work correctly:

A.Check all connections and tighten any loose connections.

B.Ensure that the source battery has adequate charge.

C.If steps A through B do not correct the problem, contact Vector Customer Service Department toll-free (866) 584-5504, for assistance.

5.5 PERMANENT INSTALLATION

5.5.1 PREPARATION FOR PERMANENT INSTALLATION

(SEE PAGE 18 FOR SPECIFIC AWG CABLES FOR INVERTER MODELS)

For permanent installation to heavy-duty battery power you will need:

Ring terminals to fit cable ends and stud terminals

Hardware to connect two specified cables to the battery bank

A specified single length of specific AWG cable multi-stranded, flexible, insulated cable

A specified amp low voltage fuse holder and fuse (slow blow type or use a specified fuse or equivalent fuse holder

Mounting screws, bolts and nuts for mounting the inverter and fuse holder

A drill for mounting the inverter and fuse holder

Lead-tin solder, flux, propane torch and an igniter for the torch

Wire stripper/cutter tool

Battery connector for specified cable for battery connection

15

Image 15
Contents Maxx Ssttm Important Cable Information Important Safety InformationRead ALL Instructions Before Using this Power Inverter No USER-SERVICEABLE Components InsideContents Basic Tour of the Maxx SST Model Inverter IntroductionBUILT-IN Automatic Safety Features Include Maxx SST Safety FeaturesAppliance Cautions Inverter Applications Uninterruptible Power Supply UPSModified Square Wave and Sine Wave Comparison Theory of OperationOperation Power RequirementsAppliance Battery Operating Time Determining Battery SizeLOW Battery Alarm Protective FeaturesInstallation Input Power RequirementsOperating Environment Installation Sequence YOU will Need Test ProcedurePermanent Installation Quick Operational Checkout or Emergency USEInverter DC cables and fuse installation are as follows Preliminary Installation NotesDo not connect this wire to the negative DC input terminal Power Inverter Model SpecificationsPower Tools and Microwave Ovens WON’T Start Service & PartsTroubleshooting Common ProblemsTroubleshooting Guide MaintenanceVector 2 Year Limited Warranty Program Warranty

VEC049C specifications

The Vector VEC049C is a sophisticated and portable power inverter designed for rugged automotive and emergency applications. This inverter converts 12V DC battery power into a stable 120V AC power source, making it ideal for powering a variety of electronic devices while on the go. It serves as an essential tool for outdoor enthusiasts, travelers, and those in need of backup power solutions during emergencies.

One of the main features of the VEC049C is its robust construction, which ensures durability in challenging environments. This inverter is equipped with multiple output options, including standard AC outlets as well as USB ports, catering to a wide array of devices such as laptops, smartphones, and small appliances. Its capacity to deliver up to 400 watts of continuous power makes it suitable for charging devices or running equipment like lights and fans.

The Vector VEC049C incorporates advanced technology to enhance both performance and safety. The unit features built-in protection mechanisms against overload, short-circuit, and over-temperature, providing peace of mind during operation. Furthermore, the inverter employs a modified sine wave output, which is often sufficient for less sensitive electronics and ensures efficient energy conversion.

The design of the VEC049C is both compact and lightweight, allowing for easy transport and storage. Users can conveniently stow it in their vehicle or carry it in a backpack, making it a practical option for road trips, camping adventures, and outdoor activities. The unit can easily be plugged into a car’s 12V outlet, allowing for easy access to power whenever it's needed.

In terms of user-friendliness, the Vector VEC049C features an LED status indicator that provides real-time information about the power condition and operation status. This usability aspect is crucial for individuals who may not have technical backgrounds but require reliable power solutions.

Overall, the Vector VEC049C stands out for its combination of portability, safety features, and versatility. With its capacity to bridge the gap between 12V DC and 120V AC power needs, this inverter is an invaluable asset for anyone seeking reliable energy solutions in a mobile format. Whether on a road trip, at a campsite, or during a power outage, the VEC049C ensures that essential devices remain operational and accessible.