Nimbus Water Systems MN-800-TF manual §9.3 Warranty

Page 23

§9.3 WARRANTY

Nimbus Water Systems

Limited One Year Warranty

Commercial and Industrial Systems

The Nimbus Water Systems (Nimbus) Limited Warranty extends to the original purchaser of the system. This warranty covers all parts and factory labor needed to repair any Nimbus-supplied item that proves to be defective material, workmanship or factory preparation. The above-mentioned warranty applies for the first full calendar year from the date of purchase. These defective items are subject to the following exclusions: membranes, filters, O-rings, and all other parts or components that require regular replacement as a result of ordinary usage.

Disclaimers This Warranty applies only if the system is installed and used in compliance with the instructions enclosed in the system.

The Warranty does not cover any non-Nimbus parts. This Warranty does not cover the costs of repairs or adjustments to the unit that may be needed because of the use of improper parts, equipment or materials. This Warranty does not cover repairs required due to use of non-Nimbus parts, unauthorized alterations of the unit, failure of a unit caused by such alterations or by unauthorized repairs.

The Warranty does not cover malfunctions of the unit due to tampering, misuse, alteration, lack of regular maintenance, misapplication, fouling due to hydrogen sulfide or iron, scaling from excessive hardness, or excessive membrane hydrolysis due to chlorine levels in excess of 1.0 mg/L, or operating at too high a recovery. In addition, damage to the unit due to fire, accident, negligence, act of god, or events beyond the control of Nimbus are not covered by this warranty.

Nimbus warrants the membranes per the manufacturers warranty. These warranties generally cover faulty material and workmanship for anywhere from one to three years. Membrane fouling is not covered.

Nimbus warrants all items supplied by outside vendors, that are used are part of the system provided, per the manufacturers warranties. These warranties generally cover faulty material and workmanship for one year.

Incidental and Consequential Damages Nimbus does not assume responsibility for payment of incidental damages as a result of the failure of this unit to comply with express or implied warranties, such as lost time, inconvenience, damage to personal property, loss of revenue, commercial losses, postage, travel, telephone expenditures, or other losses of this nature. Some states do not allow the exclusion or limitation of incidental or consequential damages, so this exclusion may not apply to you.

Owner’s Warranty Responsibilities Under the provisions of this Warranty, the owner is expected to perform timely maintenance, as described in this Manual. Neglect, improper maintenance, abuse, or unapproved modifications may invalidate the Warranty. Should your unit develop a defect or otherwise fail to perform in accordance with this warranty, you should contact the Nimbus dealer from whom the product was originally purchased.

Implied Warranties Implied at-law warranties of merchantability and fitness for a particular purpose shall terminate on the date one year after the date of purchase. Note: some states do not allow limitations on how an implied warranty lasts, so the above limitations may not apply to you.

Other Rights This Warranty gives you specific legal rights and you may also have other rights that vary from state to state.

Returned Goods Authorization In order to process a return, a Returned Goods Authorization (RGA) number will be assigned. Include the RGA number with an explanation of the defect with the item being returned. Items returned under the RGA process will be reviewed by Nimbus and/or forwarded to the original manufacturer for evaluation. Items returned to Nimbus must be sent prepaid.

23

Image 23
Contents MN-800-TF Nimbus MN-800 TF Reverse Osmosis Treatment System Model no §1.0 MN-800 TF System SpecificationsPage Page Ancillary Equipment §3.3 Operating Parameters §3.0 PRE-INSTALLATION Procedures§3.1 Packaging §3.2 Operating Limitations§4.1 Location §4.0 Installation§4.2 System Plumbing Installation Guide Lines §4.2.1 Tank Preparation and InstallationPage §4.3 Electrical §4.2.2 BY-PASS Panel Preparation and Installation§4.2.3 RO Feed Water Connection §4.2.3 RO Drain ConnectionsPage Immediately §5.0 System Flush and Performance Verification§5.2.2 Concentrate to Product Ratio §5.2.4 LOW Pressure Switch Test§5.2.5 Tank Pressure Switch Test §5.2.1 Flow Tests§6.1 Daily System Checks §6.0 Operation and Maintenance§6.3 Quarterly Service §7.0 Service §7.1 LOW Pressure Switch Adjustment§7.3 Membrane Replacement see Figure §7.2 Tank Pressure Switch AdjustmentPage Page §7.5 POST-FILTER Carbon Cartridge Replacement §7.4 PRE Filter Carbon Cartridge ReplacementPage Housings §8.0 Parts and Accessories§9.0 Attachments §9.1 Remote Bypass System Instructions §9.2 TDS Monitor Instructions Specifications§9.3 Warranty

MN-800-TF specifications

The Nimbus Water Systems MN-800-TF is an innovative water filtration system designed to provide homes with clean, safe, and great-tasting water. Emerging as a leading solution in the water purification market, the MN-800-TF stands out due to its advanced features and cutting-edge technologies that cater to diverse filtration needs.

One of the main features of the MN-800-TF is its multi-stage filtration process, which includes a combination of sediment filters, activated carbon, and reverse osmosis membranes. This multi-tier approach ensures that a wide range of impurities such as chlorine, heavy metals, sediments, and even microorganisms are effectively removed from the water. This results in not only improved taste but also enhanced safety for household consumption.

The system utilizes advanced filtration technologies, including a high-capacity reverse osmosis membrane that boasts an impressive rejection rate for dissolved solids. This technology ensures that the water retains essential minerals while eliminating harmful contaminants. The activated carbon filters are designed to reduce chlorine levels and volatile organic compounds, resulting in water that is pure and refreshing.

In terms of user convenience, the MN-800-TF is equipped with an easy-to-read digital display that provides real-time information regarding filter status and water quality. The system also features a simple, intuitive setup process and space-saving design, making it suitable for both small and large homes. The compact design allows for installation under sinks or in utility rooms, optimizing space without compromising efficiency.

Another notable characteristic of the MN-800-TF is its sustainable approach. The system is designed to produce minimal wastewater during the filtration process, which is a critical consideration given the rising concern over water conservation. Moreover, by using a reusable filter system, users can reduce plastic waste generated from traditional bottled water usage.

The Nimbus Water Systems MN-800-TF is also backed by robust customer support and a warranty, ensuring peace of mind for users. Overall, this water filtration system integrates advanced technology and user-friendly features, making it an optimal choice for anyone looking to enhance their home’s water quality. With its combination of efficiency, sustainability, and reliability, the MN-800-TF truly embodies the future of home water purification.