Nimbus Water Systems MN-800-TF manual §3.0 PRE-INSTALLATION Procedures, §3.1 Packaging

Page 7

§3.0 PRE-INSTALLATION PROCEDURES

PLEASE READ CAREFULLY. FAILURE TO FOLLOW THESE PROCEDURES CAN RESULT IN DAMAGE TO YOUR SYSTEM AND VOID YOUR WARRANTY.

§3.1 PACKAGING

Upon delivery, inspect packaging for damage and report it to your carrier at that time. After unpacking the system, inspect it carefully for signs of damage. All damage claims should be made to the delivery carrier.

§3.2 OPERATING LIMITATIONS

Nimbus MN-800 TF units are to be used on potable water only. The user must be sure that water to be treated is both microbiologically safe and non-toxic. Ensure that the operating parameters outlined in §3.3 are met at the installation site. Items of most importance are TDS, feed water pressure, flow rate, chlorine level and temperature range. A water analysis is helpful in determining if any pre-treatment is needed. If your water analysis shows levels of substances in excess of the maximums stated in §3.3, contact the Nimbus factory for pre-treatment recommendations.

§3.3 OPERATING PARAMETERS

 

 

MODEL NO.

MN-800 TF

Membrane Type

Thin Film

Feed Pressure

15-100 psi

 

(1.0 – 5.9 bar)

Maximum Feed Flow Rate

2.75 GPM

Maximum Temperature

122° F (50C)

Maximum Chlorine (continuous)

1.0 ppm

Maximum Total Dissolved Solids (TDS)

5,000 ppm

pH Range

4.0 - 11.0

Iron

0.0 ppm

Hydrogen Sulfide

0.0 ppm

Manganese

0.0 ppm

pH Range (optimum rejection)

5.0 - 8.0

Turbidity

< 1.0 NTU

Silt Density Index

< 5.0 SDI

 

 

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents MN-800-TF Nimbus MN-800 TF Reverse Osmosis Treatment System Model no §1.0 MN-800 TF System SpecificationsPage Page Ancillary Equipment §3.3 Operating Parameters §3.0 PRE-INSTALLATION Procedures§3.1 Packaging §3.2 Operating Limitations§4.1 Location §4.0 Installation§4.2 System Plumbing Installation Guide Lines §4.2.1 Tank Preparation and InstallationPage §4.3 Electrical §4.2.2 BY-PASS Panel Preparation and Installation§4.2.3 RO Feed Water Connection §4.2.3 RO Drain ConnectionsPage Immediately §5.0 System Flush and Performance Verification§5.2.2 Concentrate to Product Ratio §5.2.4 LOW Pressure Switch Test§5.2.5 Tank Pressure Switch Test §5.2.1 Flow Tests§6.1 Daily System Checks §6.0 Operation and Maintenance§6.3 Quarterly Service §7.0 Service §7.1 LOW Pressure Switch Adjustment§7.3 Membrane Replacement see Figure §7.2 Tank Pressure Switch AdjustmentPage Page §7.5 POST-FILTER Carbon Cartridge Replacement §7.4 PRE Filter Carbon Cartridge ReplacementPage Housings §8.0 Parts and Accessories§9.0 Attachments §9.1 Remote Bypass System Instructions §9.2 TDS Monitor Instructions Specifications§9.3 Warranty

MN-800-TF specifications

The Nimbus Water Systems MN-800-TF is an innovative water filtration system designed to provide homes with clean, safe, and great-tasting water. Emerging as a leading solution in the water purification market, the MN-800-TF stands out due to its advanced features and cutting-edge technologies that cater to diverse filtration needs.

One of the main features of the MN-800-TF is its multi-stage filtration process, which includes a combination of sediment filters, activated carbon, and reverse osmosis membranes. This multi-tier approach ensures that a wide range of impurities such as chlorine, heavy metals, sediments, and even microorganisms are effectively removed from the water. This results in not only improved taste but also enhanced safety for household consumption.

The system utilizes advanced filtration technologies, including a high-capacity reverse osmosis membrane that boasts an impressive rejection rate for dissolved solids. This technology ensures that the water retains essential minerals while eliminating harmful contaminants. The activated carbon filters are designed to reduce chlorine levels and volatile organic compounds, resulting in water that is pure and refreshing.

In terms of user convenience, the MN-800-TF is equipped with an easy-to-read digital display that provides real-time information regarding filter status and water quality. The system also features a simple, intuitive setup process and space-saving design, making it suitable for both small and large homes. The compact design allows for installation under sinks or in utility rooms, optimizing space without compromising efficiency.

Another notable characteristic of the MN-800-TF is its sustainable approach. The system is designed to produce minimal wastewater during the filtration process, which is a critical consideration given the rising concern over water conservation. Moreover, by using a reusable filter system, users can reduce plastic waste generated from traditional bottled water usage.

The Nimbus Water Systems MN-800-TF is also backed by robust customer support and a warranty, ensuring peace of mind for users. Overall, this water filtration system integrates advanced technology and user-friendly features, making it an optimal choice for anyone looking to enhance their home’s water quality. With its combination of efficiency, sustainability, and reliability, the MN-800-TF truly embodies the future of home water purification.
Top Page Image Contents