Nimbus Water Systems MN-800-TF manual §6.0 Operation and Maintenance, §6.1 Daily System Checks

Page 14

gauge reads about 60 psi (4.1 bar). Now, by opening the tank inlet valve the tank pressure should begin to drop and the system should turn on when the pressure drops below about 40 psi (2.8 bar). If the system fails to shut off at 60 psi (4.1 bar), watch the gauge and be sure that it does not rise above 80 psi (5.5 bar). If it reaches 80 psi (5.5 bar), unplug the system. Refer to §7.1.2 for TANK PRESSURE SWITCH ADJUSTMENT.

§6.0 OPERATION AND MAINTENANCE

Nimbus MN-800-TF systems are designed for simple operation with little user intervention. Nimbus recommends keeping accurate performance records and following a regular preventative maintenance schedule to maximize the life of your system. A performance record sheet is provided at the back of this manual for you to copy and keep near your system. This record sheet will be important for warranty verification, trouble shooting as well as possibly suggesting more or different pre-treatment.

§6.1 DAILY SYSTEM CHECKS

Your water supply pressure can vary from time to time. This can also affect your system operating pressure. Therefore, it is recommended to check and adjust your system pressure daily to ensure maximum water production rates and quality. Check both the water supply pressure gauge and the filter pressure gauge. Under normal conditions, there should be a 3-5 psi difference between the two gauges. When the difference reaches 10 psi, a pre-filter change is recommended. See §7.4 PRE FILTER CARBON CARTRIDGE REPLACEMENT for further discussion.

§6.2 MONTHLY SYSTEM CHECKS

In addition to the daily checks the procedures in §5.2 PERFORMANCE VERIFICATION may be performed, record all data on your performance record sheet.

§6.3 QUARTERLY SERVICE

It is recommended to change both sediment and carbon filter cartridges at least every 3 months. Carbon cartridges should be changed more often if bad taste and/or odor become evident. The pre-filter carbon cartridge should be changed more often if water supply pressure and filter pressure gauges differ by 10 psi or more, or if the Chlorine content of the city water is higher than 0.2 ppm.

§6.4 PERIPHERAL EQUIPMENT

Peripheral equipment such as pre-filters, post-filters and tanks also have periodic maintenance requirements. It is essential to maintain these as they can have a dramatic effect on the performance of your system. Refer to their specific manuals for proper maintenance procedures.

§7.0 SERVICE

§7.1 LOW PRESSURE SWITCH ADJUSTMENT

•The low pressure switch is factory set to turn the system off if feed pressure drops below 12 psi (0.8 bar). This switch can be adjusted to as low as 3 psi (0.2 bar) and as high as 20

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents MN-800-TF Nimbus MN-800 TF Reverse Osmosis Treatment System §1.0 MN-800 TF System Specifications Model noPage Page Ancillary Equipment §3.2 Operating Limitations §3.0 PRE-INSTALLATION Procedures§3.1 Packaging §3.3 Operating Parameters§4.2.1 Tank Preparation and Installation §4.0 Installation§4.2 System Plumbing Installation Guide Lines §4.1 LocationPage §4.2.3 RO Drain Connections §4.2.2 BY-PASS Panel Preparation and Installation§4.2.3 RO Feed Water Connection §4.3 ElectricalPage §5.0 System Flush and Performance Verification Immediately§5.2.1 Flow Tests §5.2.4 LOW Pressure Switch Test§5.2.5 Tank Pressure Switch Test §5.2.2 Concentrate to Product Ratio§7.0 Service §7.1 LOW Pressure Switch Adjustment §6.0 Operation and Maintenance§6.3 Quarterly Service §6.1 Daily System Checks§7.2 Tank Pressure Switch Adjustment §7.3 Membrane Replacement see FigurePage Page §7.4 PRE Filter Carbon Cartridge Replacement §7.5 POST-FILTER Carbon Cartridge ReplacementPage §8.0 Parts and Accessories Housings§9.0 Attachments §9.1 Remote Bypass System Instructions Specifications §9.2 TDS Monitor Instructions§9.3 Warranty

MN-800-TF specifications

The Nimbus Water Systems MN-800-TF is an innovative water filtration system designed to provide homes with clean, safe, and great-tasting water. Emerging as a leading solution in the water purification market, the MN-800-TF stands out due to its advanced features and cutting-edge technologies that cater to diverse filtration needs.

One of the main features of the MN-800-TF is its multi-stage filtration process, which includes a combination of sediment filters, activated carbon, and reverse osmosis membranes. This multi-tier approach ensures that a wide range of impurities such as chlorine, heavy metals, sediments, and even microorganisms are effectively removed from the water. This results in not only improved taste but also enhanced safety for household consumption.

The system utilizes advanced filtration technologies, including a high-capacity reverse osmosis membrane that boasts an impressive rejection rate for dissolved solids. This technology ensures that the water retains essential minerals while eliminating harmful contaminants. The activated carbon filters are designed to reduce chlorine levels and volatile organic compounds, resulting in water that is pure and refreshing.

In terms of user convenience, the MN-800-TF is equipped with an easy-to-read digital display that provides real-time information regarding filter status and water quality. The system also features a simple, intuitive setup process and space-saving design, making it suitable for both small and large homes. The compact design allows for installation under sinks or in utility rooms, optimizing space without compromising efficiency.

Another notable characteristic of the MN-800-TF is its sustainable approach. The system is designed to produce minimal wastewater during the filtration process, which is a critical consideration given the rising concern over water conservation. Moreover, by using a reusable filter system, users can reduce plastic waste generated from traditional bottled water usage.

The Nimbus Water Systems MN-800-TF is also backed by robust customer support and a warranty, ensuring peace of mind for users. Overall, this water filtration system integrates advanced technology and user-friendly features, making it an optimal choice for anyone looking to enhance their home’s water quality. With its combination of efficiency, sustainability, and reliability, the MN-800-TF truly embodies the future of home water purification.
Top Page Image Contents