Nimbus Water Systems MN-800-TF manual §7.4 PRE Filter Carbon Cartridge Replacement

Page 18

•Since the membrane is new it will need to be flushed and tested. Follow procedures outlined in §5.0 SYSTEM FLUSH AND PERFORMANCE VERIFICATION.

§7.4 PRE FILTER CARBON CARTRIDGE REPLACEMENT

•Before servicing, always disconnect power to the unit to avoid shock.

•Close feed water and tank valves.

•Activate the switch on the side of the gray box in the back of the unit just enough to relieve any pressure in the filter.

•Remove pre-filter sump by turning clockwise (as viewed from the top). A filter wrench may be necessary.

•Remove cartridge and inspect. If cartridge is extremely silted, you should consider changing more often. Discard old cartridge.

•Take O-ring from seat in sump and inspect for cracks or nicks, replace as necessary.

•Inspect sump for cracks, especially in the threaded area. Replace as necessary.

•Lubricate O-ring with an appropriate lubricant. Install O-ring into its seat in sump.

•Install new sediment cartridge.

•Replace sump by screwing it onto cap in a counter-clockwise direction (as viewed from top). A wrench should not be needed. Hand tightened is sufficient.

•Restore water and power; check for leaks.

§7.5 POST-FILTER CARBON CARTRIDGE REPLACEMENT

•Before servicing, always disconnect power to the unit to avoid shock.

•Close feed water and tank valves.

•Open faucet or disconnect line from "FAUCET" connection to relieve pressure from the carbon filter.

•Remove post-filter sump by turning clockwise (as viewed from the top). A filter wrench may be necessary.

•Remove and discard old cartridge.

•Remove O-ring from seat in sump and inspect for cracks or nicks, replace as necessary.

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents MN-800-TF Nimbus MN-800 TF Reverse Osmosis Treatment System §1.0 MN-800 TF System Specifications Model noPage Page Ancillary Equipment §3.2 Operating Limitations §3.0 PRE-INSTALLATION Procedures§3.1 Packaging §3.3 Operating Parameters§4.2.1 Tank Preparation and Installation §4.0 Installation§4.2 System Plumbing Installation Guide Lines §4.1 LocationPage §4.2.3 RO Drain Connections §4.2.2 BY-PASS Panel Preparation and Installation§4.2.3 RO Feed Water Connection §4.3 ElectricalPage §5.0 System Flush and Performance Verification Immediately§5.2.1 Flow Tests §5.2.4 LOW Pressure Switch Test§5.2.5 Tank Pressure Switch Test §5.2.2 Concentrate to Product Ratio§7.0 Service §7.1 LOW Pressure Switch Adjustment §6.0 Operation and Maintenance§6.3 Quarterly Service §6.1 Daily System Checks§7.2 Tank Pressure Switch Adjustment §7.3 Membrane Replacement see FigurePage Page §7.4 PRE Filter Carbon Cartridge Replacement §7.5 POST-FILTER Carbon Cartridge ReplacementPage §8.0 Parts and Accessories Housings§9.0 Attachments §9.1 Remote Bypass System Instructions Specifications §9.2 TDS Monitor Instructions§9.3 Warranty

MN-800-TF specifications

The Nimbus Water Systems MN-800-TF is an innovative water filtration system designed to provide homes with clean, safe, and great-tasting water. Emerging as a leading solution in the water purification market, the MN-800-TF stands out due to its advanced features and cutting-edge technologies that cater to diverse filtration needs.

One of the main features of the MN-800-TF is its multi-stage filtration process, which includes a combination of sediment filters, activated carbon, and reverse osmosis membranes. This multi-tier approach ensures that a wide range of impurities such as chlorine, heavy metals, sediments, and even microorganisms are effectively removed from the water. This results in not only improved taste but also enhanced safety for household consumption.

The system utilizes advanced filtration technologies, including a high-capacity reverse osmosis membrane that boasts an impressive rejection rate for dissolved solids. This technology ensures that the water retains essential minerals while eliminating harmful contaminants. The activated carbon filters are designed to reduce chlorine levels and volatile organic compounds, resulting in water that is pure and refreshing.

In terms of user convenience, the MN-800-TF is equipped with an easy-to-read digital display that provides real-time information regarding filter status and water quality. The system also features a simple, intuitive setup process and space-saving design, making it suitable for both small and large homes. The compact design allows for installation under sinks or in utility rooms, optimizing space without compromising efficiency.

Another notable characteristic of the MN-800-TF is its sustainable approach. The system is designed to produce minimal wastewater during the filtration process, which is a critical consideration given the rising concern over water conservation. Moreover, by using a reusable filter system, users can reduce plastic waste generated from traditional bottled water usage.

The Nimbus Water Systems MN-800-TF is also backed by robust customer support and a warranty, ensuring peace of mind for users. Overall, this water filtration system integrates advanced technology and user-friendly features, making it an optimal choice for anyone looking to enhance their home’s water quality. With its combination of efficiency, sustainability, and reliability, the MN-800-TF truly embodies the future of home water purification.
Top Page Image Contents