Nilfisk-ALTO ATTIX 965-2H/M SD XC, ATTIX 965-0H/M SD XC manual Check volume flow monitor

Page 18

4.3Check volume flow monitor

Before picking up dust with maxi- mum room concentration values:

4.4Acoustic warning

4.5Cleaning the filter element

After picking up harmless dust us- ing the waste bag.

ATTIX 9 H/M

1.Check that all the filters are present and properly fitted.

2.When the motor is running, hold the suction hose shut. An acoustic warning sounds after approx. 1 second.

For safety reasons, an acoustic warning sounds if the air speed in the suction hose drops to be- low 20 m/s. See section “Trou- bleshooting”.

10 sec .

To ensure that suction performance is always at its best, the filter element is automatically cleaned during operation. We recommend complete cleaning if the filter element becomes extremely dirty.

1.Switch off the vacuum cleaner

2.Close the nozzles or suction hose opening with the palm of your hand.

3.Turn the switch to position „I“ and let the cleaner operate for ap- prox. 10 seconds with the suction hose opening closed.

1) Optional accessories / Option depending on model

17

Original Instructions

 

Image 18
Contents Operating Instructions Contents Important safety instructions Symbols used to markTransport StorageExtension lead Maintenance, cleaningElectrical connection Cable length Cross section 16 a 25 aOEL = Occupational Exposure Limit Original Instructions Risks Electrical components Picking up liquidsAttix 9 H/M Description Operating elementsOperating panel Before starting the cleaner Before starting the cleaner Inserting the safety filter bagOptional accessories / Option depending on model Inserting the disposal bag Optional accessories / Option depending on model Control / Operation Auto-On/Off-Operation auto switch position Check volume flow monitor Acoustic warning Cleaning the filter elementApplications and methods TechniquesPicking up dry Substances After using the cleaner Switching the vacuum cleaner off and storageMaintenance Maintenance plan After finishing work When requiredMaintenance work 7.2.1 Emptying the dirt tank Removing the dirt tankInserting the dirt tank Replacing the disposal bag Removing the disposal bagReplacing the safety filter bag Removing the safety filter bagReplacing filter element H Remove the filter elementInserting the filter element Troubleshooting Fault Cause RemedyGuarantee Further informationEC declaration of conformity Technical data Optional accessoriesHead Quarter