Nilfisk-ALTO ATTIX 965-2H/M SD XC Before starting the cleaner, Inserting the safety filter bag

Page 12

3.1.2Before starting the cleaner

ATTIX 9 H/M

Depending on how hazardous the dust is, the cleaner must be fitted with appropriate filters.

Type of dust

Filter bag/waste bag

Non-hazardous dust

Waste bag (5 pcs.)

Non-carcinogenic dust with OEL

Order No.

values > 0.1 mg/m³ (observe any

302001480

additional national regulations)

 

• All dusts with OEL values

Safety filter bag

• Wood dust

(5 pcs.)

 

Order No.

 

302003473

• All dusts with OEL values

Filter element “H”

• Wood dust

Order No.

 

107400564

Before picking up dust with occupational exposure limit values:

1.Check that all the filters are present and properly fitted.

2.The hose diameter and the setting for the suction hose diameter must be the same.

3.When the motor is running, hold the suction hose shut. For safety reasons, an acoustic warning sounds if the air speed in the suc- tion hose drops to below 20 m/s.

3.1.3Inserting the safety filter bag

A

A

B

C

1.The mains plug should not yet be inserted into a socket.

2. Apply

 

parking

brakes

(A)

on

both

castors.

3.Swing the bar (B) upwards.

4.Use the handle (C) to pull the dirt tank out of

the vacuum cleaner.

1) Optional accessories / Option depending on model

11

Original Instructions

 

Image 12
Contents Operating Instructions Contents Important safety instructions Symbols used to markTransport StorageMaintenance, cleaning Electrical connectionExtension lead Cable length Cross section 16 a 25 aOEL = Occupational Exposure Limit Original Instructions Risks Electrical components Picking up liquidsAttix 9 H/M Description Operating elementsOperating panel Before starting the cleaner Before starting the cleaner Inserting the safety filter bagOptional accessories / Option depending on model Inserting the disposal bag Optional accessories / Option depending on model Control / Operation Auto-On/Off-Operation auto switch position Check volume flow monitor Acoustic warning Cleaning the filter elementApplications and methods TechniquesPicking up dry Substances After using the cleaner Switching the vacuum cleaner off and storageMaintenance Maintenance plan After finishing work When requiredMaintenance work 7.2.1 Emptying the dirt tank Removing the dirt tankInserting the dirt tank Replacing the disposal bag Removing the disposal bagReplacing the safety filter bag Removing the safety filter bagReplacing filter element H Remove the filter elementInserting the filter element Troubleshooting Fault Cause RemedyGuarantee Further informationEC declaration of conformity Technical data Optional accessoriesHead Quarter