ATTIX 9 H/M
4.2.4Auto-On/Off-Operation - "auto" switch position 1)
The vacuum cleaner is switched on and off by the power tool connect- ed. Dirt is picked up from the source of dust immediately.
To comply with regulations, only ap- proved dust producing tools should be connected.
The maximum power consumption of the connected electrical appli- ance is stated in section 9.5 "Tech- nical data".
Before switching the switch to posi- tion „auto“, ensure that the tool con- nected to the appliance socket is switched off.
1.Switch off the vacuum clean- er.
2.Switch off the power tool.
3.Connect the power tool and the vacuum cleaner with a suction hose.
4.Insert the plug of the pow- er tool into the tool socket
on | the | operating | panel |
of | the | vacuum | cleaner. |
5.Switch on the vacuum clean- er. Switch in "auto" position.
6.Switch on the power tool. The vacuum cleaner motor starts when the connected power tool is switched on.
When the power tool is switched off, the vacuum cleaner continues to run for a short moment so that any dust in the suction hose is conveyed to the filter bag.
16 | 1) Optional accessories / Option depending on model |
| Original Instructions |