Nilfisk-ALTO ATTIX 965-2H/M SD XC, ATTIX 965-0H/M SD XC manual Control / Operation

Page 16

4 Control / Operation

4.1Connections

4.1.1 Electrical connection

The operating voltage shown on the rating plate must correspond to the voltage of the mains power supply.

4.2Switching on the vacuum cleaner

4.2.1 Switch " I-0-II " 1)

The hose diameter and the setting for the suction hose diameter must be the same.




ø27	ø27
ø32	ø32
ø36	ø36
ø38	ø38
ø50	ø50

4.2.2 Switch „ auto-0-I “ 1)

The hose diameter and the setting for the suction hose diameter must be the same.




ø27	ø27
ø32	ø32
ø36	ø36
ø38	ø38
ø50	ø50

4.2.3 Suction power control 1)

ATTIX 9 H/M

1.Ensure that the cleaner is switched off.

2.Insert the power cord into a properly installed and fused socket with earthing contact.

	Switch	Function
	position	Function
	position

IReduced

suction

0Off

IIMaximum

suction

	Switch	Function
	position	Function
	position

IMaximum

suction

	Switch	Function
	position	Function
	position
		The suction
		power control
		switch allows
		precise
		adaptation of
		the suction
		power for
		different
		cleaning tasks.

1) Optional accessories / Option depending on model	15
Original Instructions

Image 16

Contents Operating Instructions Contents Important safety instructions Symbols used to markTransport StorageMaintenance, cleaning Electrical connectionExtension lead Cable length Cross section 16 a 25 aOEL = Occupational Exposure Limit Original Instructions Risks Electrical components Picking up liquidsAttix 9 H/M Description Operating elementsOperating panel Before starting the cleaner Before starting the cleaner Inserting the safety filter bagOptional accessories / Option depending on model Inserting the disposal bag Optional accessories / Option depending on model Control / Operation Auto-On/Off-Operation auto switch position Check volume flow monitor Acoustic warning Cleaning the filter elementTechniques Applications and methodsPicking up dry Substances After using the cleaner Switching the vacuum cleaner off and storageMaintenance Maintenance plan After finishing work When requiredRemoving the dirt tank Maintenance work 7.2.1 Emptying the dirt tankInserting the dirt tank Replacing the disposal bag Removing the disposal bagReplacing the safety filter bag Removing the safety filter bagReplacing filter element H Remove the filter elementInserting the filter element Troubleshooting Fault Cause RemedyFurther information GuaranteeEC declaration of conformity Technical data Optional accessoriesHead Quarter