Nilfisk-Advance America 01610A manual Important Safety Instructions

Page 3

ENGLISH EN

IMPORTANT SAFETY INSTRUCTIONS

This machine is only suitable for commercial use, for example in hotels, schools, hospitals, factories, shops and offices other than normal residential housekeeping purposes.

When using this appliance, basic precautions should always be followed, including the following:

WARNING!

To reduce risk of fire, electric shock, injury or property damage, read all instructions before using.

*Do not operate this machine until it is completely assembled. Inspect the machine carefully before opera- tion.

*Machines can cause an explosion when operated near flammable materials and vapors. Do not use this machine with or near fuels, grain dust, solvents, thinners, or other flammable materials.

*Lead acid batteries generate gases which can cause an explosion. Keep sparks and flames away from bat- teries. Do not smoke around the machine. Charge the batteries only in an area with good ventilation. Make sure that you unplug the AC charger from the wall outlet before disconnecting from the machine.

*Waste Disposal Method: Dispose as hazardous waste. Observe all federal, state and local environmental regulations for acid or lead scrap. Send batteries to lead smelter for reclamation following applicable federal, state and local regulations.

*Working with batteries can be dangerous! Always wear eye protection and protective clothing when working near batteries. Remove all jewelry. Do not put tools or other metal objects across the battery terminals, or the tops of the batteries.

*Using a charger with a damaged power cord could result in an electrocution. Do not use the charger if the power cord is damaged.

*Operating this machine from anywhere other than the back of the machine could result in injury or damage.

*This machine is heavy. Get assistance before attempting to transport or move it. Use two able persons to move the machine on a ramp or incline. Always move slowly. Do not turn the machine on a ramp. If operating machine on a gradient over 2%, do not stop, turn, or park.

*Machines can topple over if guided over the edges of stairs or loading docks and cause injury or damage. Stop and leave this machine only on a level surface. When you stop the machine, turn the key “OFF”.

*Alterations or modifications not authorized by the manufacturer voids any and all warranties and liabilities and could result in damage to the machine or injury to the operator or other bystanders.

*Maintenance and repairs performed by unauthorized personnel could result in damage or injury.

*Keep the electrical components of the machine dry. Wipe the machine down after each use. For storage, keep the machine in a dry building.

*Read all machine labels before attempting to operate. Make sure all of the labels and instructional infor- mation are attached or fastened to the machine.

*Use only commercially available floor cleaners and waxes intended for machine operation. Do not use flammable materials.

*When cleaning, servicing or maintaining the machine, replacing parts or converting to another function, the power source should be switched off.

*Use of this machine to move other objects or to climb on could result in injury or damage. Do not use this machine as a step or furniture. Do not ride on this machine.

*Your machine warranty will be voided if anything other than Nilfisk parts are used on your machine.

SAVE THESE INSTRUCTIONS

FORM NO. 71456A - UHB 51-1500 - 3

Image 3
Contents UHB51-1500 Table of Contents Important Safety Instructions Know Your Machine Introduction Preparing the Machine for USEModifications Form no a UHB Adjusting PAD Pressure Installing the BatteriesPAD Installation Dust BAG InstallationMaintenance Schedule MaintenanceSpecifications TroubleshootingPivot bracket Slots to allow adjustment Indice Guarde Estas Instrucciones ¡ADVERTENCIAConozca SU Máquina ¡ADVERTENCIA ¡PRECAUCIÓNModificaciones Retire la cubierta Reemplace la bolsa de polvo Ajuste DE LA Presión DE LA ALMO- Hadilla ImportanteInstalación DE LAS Baterías Instalación DE LA AlmohadillaMantenimento Resolución DE ProblemasMénsula de pìvote Ranuras para permitir el ajuste Table DES Matières Programme de maintenanceConservez CES Consignes AvertissementLA Decouverte DE Votre Machine Altérations Plaque SignalétiqueAvertissement Pièces ET EntretienRetirez le capot Remplacez le sac à poussières Réglage DE LA Pression DU Disque Installation DES BatteriesInstallation DU Disque Installation DU SAC À PoussièresMaintenance DES Batteries Programme DE MaintenanceSupport du pivot Encoches de réglage Page UHB51-1500 Table of Contents UHB51-1500 Assembly UHB51-150008-4 08-4ASSEMBLY UHB51-1500 Frame Assy Before February Mainframe, 20 not available for sale Frame Assy After February Frame Assy After February Handle Assy 08-07 Body Assy Body Assy Head Assy 10-05 08-4 11-7 Active VAC KITBlack RED TransaxleLadder Diagram Page Page Year of Affixing the CE marking Nilfisk-Advance A/S