Lennox Hearth 9470 user manual How to make a call, Calling through a Desk Phone

Note: if the target phone is shown greyed out on the touchscreen, it means that the phone has become disconnected. This can only occur with mobile- or softphones. You need to either re-connect the phone or touch another phone on-screen to select a different target. See the figure below.

english

Figure 19: A disconnected target phone is shown greyed out on the touchscreen

6.3How to make a call

Calling through a Desk Phone

Figure 20: Placing a call with your headset and desk phone

To place a call through your desk phone:

1.If necessary, set the desk phone as the current target for your headset (see also Section 6.2: The Target Phone Concept.)

2.Do one of the following to get a dial tone:

-If you are using a handset lifter or electronic-hookswitch:

Open the audio link to the headset by doing one of the following: tap the headset’s multifunction button or touch the call icon on the base touchscreen. You should now hear a dial tone.

-If you do not have a handset lifter or electronic-hookswitch:

Open the audio link to the headset by doing one of the following: tap the headset’s multifunction button; touch the call icon on the base touchscreen; or lift the headset from the base (if enabled, see Section 8.13: Headset Docking-Operation). Then lift your desk phone handset from the receiver and set it aside — or press the headset button, if your desk phone has one — to get a dial tone.

3. Dial the number using your desk phone’s buttons.

Jabra PRO 9460, 9460-Duo and 9470 User manual

26