Choosing Voice or Tones for Target indicators
The headset is capable of playing either a tone or a human voice when you change the target phone, thus telling you what the new target is. The human voice is always in English, regardless of your other language settings.
By default, the human voice will be played. However, if you do not like hearing the English voice, you can switch to using the tones.
To change this setting, use the Jabra Control Center program of the Jabra PC Suite running on your PC. See the online help for complete details.
Headset Visual Indicators (LED)
The headset includes a multicolor LED which indicates the state of the headset, as outlined in the table below. During charging, the headset state LED indication is shown interspersed with a constant yellow light (which shows the headset is charging). Once fully charged, only the state LED indication is shown (no charging light while fully charged).
Headset state | LED when battery level is good | LED when battery level is low |
|
|
|
| Blue 200ms | Red 100ms |
Idle | Off 4800ms | Off 4900ms |
Repeats for 60 seconds | Repeats indefinitely | |
|
|
|
| Green 300ms | Red 100ms |
| Off 300ms | Off 500ms |
| Green 300ms | Red 100ms |
Not connected | Off 300ms | Off 500ms |
Green 300ms | Red 100ms | |
| Off 1500ms | Off 1700ms |
| Repeats for 60 seconds | Repeats indefinitely |
|
|
|
| Blue 100ms | Red 100ms |
| Off 300ms | Off 300ms |
Call active | Blue 100ms | Red 100ms |
Off 2000ms | Off 2000ms | |
| Repeats indefinitely | Repeats indefinitely |
|
|
|
| Blue 100ms | Red 100ms |
| Off 300ms | Off 300ms |
Ringing | Blue 100ms | Red 100ms |
Off 1000ms | Off 1000ms | |
| Repeats indefinitely | Repeats indefinitely |
|
|
|
english
Jabra PRO 9460,
38