8.3Standard Operation
During normal operation, the touchscreen shows status information about your headset, displays the current target phone and indicates its status. From here you can answer an incoming call, end the current call, access your base settings, choose a target phone and open an audio link to the current target phone.
2 | 1 |
4 
3
5
1.Settings icon: touch here to go to the settings menu for your base and headset.
2.Battery indicator: indicates the current charge level of your headset.
3.Current target phone: shows the current target phone and indicates its status (ringing, online, etc.). This is the phone to which you will connect if you tap the headset multifunction button or touch the
4.Other phones: touch the appropriate icon here to change the current target phone — or press the headset multifunction button when no call is active to cycle through available phones.
5.Activate audio link: touch here to answer an incoming call or activate the audio link to the current target phone — or tap the headset multifunction button when no call is active.
english
Figure 33: Touchscreen controls for standard operation
8.4Pairing and Connecting the Base and Headset
To enable secure wireless communication between the Jabra PRO headset and its base, you must pair the two units. Once paired, they will find, connect and communicate with each other as needed whenever they are in range and turned on, but they will ignore all other DECT devices in the area.
Pairing the DECT Base and Headset
The headset can only be paired with one base at a time, while the base is able to pair with one primary headset and an optional and temporary secondary headset. The secondary pairing enables you to share your conversation with another headset user to support conference calling (see Section 8.12: Conference Calling). You cannot pair the Jabra PRO base or headset with other types of DECT products.
To pair your base and headset:
1.Dock the headset to the charging cradle of the target base.
2.If the headset is not already paired with that base, then the touchscreen will ask you if you would like to do one of the following:
-Pair as primary: touch this icon to make the current headset the new primary device for the current base. This will remove any previous primary headset.
-Pair as secondary: touch this icon to make a temporary connection to the current headset. This connection will only last until the end of the next (or current) call. The current primary headset will be kept and all audio will be shared with both headsets.
-Do not pair: touch this icon to charge the current headset without pairing with it.
3.Touch the icon of your choice and you are done.
Note: A similar pairing mechanism is also used by Bluetooth devices. Jabra PRO 9470 supports Bluetooth for the purpose of adding a mobile phone to your headset solution. However, the Bluetooth pairing is completely independent of the DECT pairing mechanism described above. See Section 9.2: Pairing and Connecting with Other Bluetooth Devices for details.
Jabra PRO 9460,
43