Lennox Hearth 9470 user manual Controlling the Speaker Volume and Microphone, Desk Phones

Page 30

6.6Controlling the Speaker Volume and Microphone

The headset features a touch panel that is similar to the touch pad included with many laptop computers. Use it to adjust the volume you hear in your headset and to mute/enable the microphone.

-Slide your finger up the touch panel (away from your mouth) to increase the volume.

-Slide your finger down the touch panel to decrease the volume.

-Double-tap on the touch panel to mute or unmute the microphone.

english

Figure 26: Use the headset’s touch panel to control listening volume and microphone mute

You can also control the volume and mute functions using the touchscreen; see Section 8.5: Setting Active-Call and Audio Preferences for details.

Note: A tone will sound to indicate each new volume setting; a double tone indicates that you have reached maximum or minimum volume. You will also hear a soft tone in the headset to remind you when microphone muting is active; this signal will repeat occasionally until you reactivate the microphone.

If you hang up while the microphone is muted, it will automatically be re-enabled the next time you place or answer a call.

6.7Switching between Your Phone and Headset

It is possible to enable or disable the headset without interrupting your current call.

Desk Phones

To go from desk-phone handset to your headset:

1.If necessary, set the desk phone as the current target for your headset (see also Section 6.2: The Target Phone Concept.)

2.Open the audio link to the headset by doing one of the following: tap the headset’s multifunction button; touch the call icon on the base touchscreen; or lift the headset from the base (if enabled, see Section 8.13: Headset Docking-Operation).

3.Listen to hear if you are now connected through the headset. If you are not connected, then you may need to press the desk-phone headset button. See also your desk-phone documentation.

4.Place the handset on your desk, but do not hang up, because this will terminate your call.

To go from headset to desk-phone handset:

1.Lift the handset to your ear.

2.Do one of the following:

-If you are using a traditional phone without a headset button or electronic hookswitch, then close the audio connection to your headset by tapping the headset multifunction button, docking the headset in its cradle on the Jabra PRO base or touching the close-connection icon on the base touchscreen. (This applies also if you are using a GN1000 handset lifter.)

-If your desk phone has a dedicated headset port and/or electronic hookswitch, then please see your desk-phone documentation for details. In some cases, you must press a button on your desk phone, while in others it will be automatic. Also, some solutions may terminate the connection if you close the audio link to the headset (e.g., by tapping its multifunction button or docking it in its charge cradle), while others may require you to do this before you can speak on the handset. Experiment to find out what works best for you.

Jabra PRO 9460, 9460-Duo and 9470 User manual

30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Jabra PRO 9460, 9460-Duo Contents Installing and Running the Jabra PC Suite 12.1 12.212.3 13.3 13.113.2 13.4Jabra PRO 9470 headset also features the following Jabra PRO 9460 headset also features the followingJabra PRO 9460-Duo also features the following Jabra PRO Touchscreen Base FeaturesImportant Safety Information Intellitone Noise-Exposure ProtectionProtection level Criteria for selecting Care and Maintenance Other SpecificationsPackage Contents Product OverviewOptional Accessories Jabra PRO accessories available separatelyHeadset Diagrams Jabra PRO 9460-Duo headset Base Diagram System Setup and Connections Setup Overview and BackgroundQuick-Start Setup Wizard Adjusting the Headset CradlePreparing the base and and Assembling the Headset Applying Power to the Base Assembling the HeadsetPlacing the Headset in its Cradle Connecting the Base to Your Desk PhoneIdentifying Your Desk Phone Features Standard desk phoneConnecting to a Desk Phone without a Headset Port Connecting to a Standard Headset PortConfiguring the Jabra PRO Base for Your Desk Phone Connecting to a Proprietary Headset PortFor Jabra PRO Setting the Microphone Level If the Jabra PRO base cannot contact the Jabra test serverUsing a Handset Lifter or Electronic Hookswitch Connecting to the GN1000 Remote Handset LifterConnecting the Base to Your Computer Using an Electronic-Hookswitch ConnectionConnecting Jabra PRO 9470 To a Mobile Phone Using a Remote Online IndicatorInstalling and Running the Jabra PC Suite Daily Use Calling, Answering and Hanging Up Headset Controls and IndicatorsHeadset Visual and Audio Indicators Target Phone ConceptHow to make a call If you are using a handset lifter or electronic-hookswitchCalling through a Desk Phone Calling through a Softphone Standard Mobile Phone Dialing Jabra PRO 9470 OnlyHow to answer a call Voice-Activated Mobile Phone Dialing Jabra PRO 9470 OnlyFor all other types of phones Hanging upFor desk phones without automatic ringtone detection For all other types of phones and desk phonesControlling the Speaker Volume and Microphone Switching between Your Phone and HeadsetDesk Phones Last Number Redial Managing Call Collisions and Call WaitingListening to Music How to Wear the Headset Jabra PRO HeadsetHeadset Style Jabra PRO Model Wearing Style Options Detaching the headband Attaching or detaching a Wearing StyleAttaching the headband Attaching the ear hookDetaching the ear hook Attaching the neckbandHeadset Controls and Signals Function Tap Double-Tap Headset Signal Tones State or event Tone description SampleChoosing Voice or Tones for Target indicators Headset Visual Indicators LEDHeadset state Headset visual signals and their meanings How to replace the battery Battery Indicators, Recharge and ReplacementBattery indicators Recharging the HeadsetNoise-Cancelling Microphone Jabra PRO 9460 and 9460-Duo Staying within RangeNoise Blackout Microphone Jabra PRO Jabra PRO Touchscreen Base Base Connections and SetupUsing the Touchscreen Status barPairing and Connecting the Base and Headset Pairing the Dect Base and HeadsetStandard Operation Setting Active Call and Audio Preferences Managing the Dect ConnectionManaging Call Collision Managing Call Waiting English Setting General User Preferences Finding the general user preferencesRe-running the Setup Wizards Base Audio IndicatorsNarrowband vs. Wideband Audio Conference Calling Headset Docking-OperationTheft Protection Dealing with Density Issues Using Jabra PRO 9470 with a Mobile Phone Jabra PRO Bluetooth SupportPairing and Connecting with Other Bluetooth Devices Pairing the Base with a Mobile PhoneManaging Bluetooth Connections Mobile phone connection is lost Mobile phone and base are reconnected Language Enable Recording Disable audio Detection Recording Your CallsFAQs and Troubleshooting Why doesn’t my computer detect the Jabra PRO 9400 base?How do I pair my headset with the Jabra PRO 9400 base? Hear myself when I talk using my desk phone. What can I do? What is the range on the Jabra PRO 9400 solution? What is the talk time for a Jabra PRO 9400 headset?What about conference calls? USA and Canada Getting AssistanceEurope Asia/PacificTechnical Specifications All Jabra PRO HeadsetsJabra PRO Midi Headset Jabra PRO 9460-Duo Headset Headset BatteryJabra PRO Flex Headset Headset Hearing ProtectionMaterials and Allergies Touchscreen BaseJabra PRO 9470 Base Bluetooth Support Certifications and Safety ApprovalsProduct Disposal GlOSSARY USB Bluetooth adapter Softphone driverWideband audio Type 9400HS/BS RevD
Top Page Image Contents