KMC BAC-10000 manual Overview Applications and Installation

Page 2

Overview

Applications and Installation

The KMC FlexStat series of intelligent temperature/ humidity/occupancy-sensing, wall-mounted, ther- mostat/controllers are native BACnet Advanced Application Controllers (B-AAC) for use in a BAC- net system. The FlexStat simplifies networked zone control for common packaged HVAC equipment, such as packaged rooftop units, fan coil units, heat pumps, and other similar applications. In addi- tion, applications such as pressure dependent VAV, terminal reheat, and medium-sized central station air handling equipment applications may also be ad- dressed through the on-board libraries of programs built into the devices.

Communication with

Other BACnet Devices

 

Optional

Temperature

Humidity

Sensing

and

 

Motion

 

Sensing

3 Analog

Up to 9

Inputs

Outputs

for Other

(Analog

Sensors or

and/or

Contacts

Relays)

Applications

AHU

FCU

HPU

RTU

The on-board library of programs permits rapid configuration of a wide range of HVAC control ap- plications.

The FlexStat series also provides the capability to customize the standard library of sequences using KMC’s BACstage programming tool. This enables a local authorized KMC installing contractor to adapt the standard library to the unique site needs and ap- plication specific requirements of a particular project.

Dimensions in

 

 

Terminal Blocks

inches (mm)

 

 

on Removable

 

 

 

 

Backplate for

 

 

 

 

Easy Wiring

 

 

 

 

 

5.551

 

 

 

 

(141)

 

 

 

 

 

 

 

 

1.125

(28.6)

EIA-485 Data Port for

Quick Network Access

24 Volts AC

Quick (Temporary) Network/

Power

Programming Access

1.Wire the FlexStat’s backplate to the desired equipment and set the FlexStat’s end-of-line and input pull-up resistor switches.

2.Select the relevant application and options from the (Advanced) Application submenu of the Advanced Menu and other appropriate menus.

3.Configure the FlexStat for the BACnet network. (See Network Connection on page 16.)

For general mounting and connection details, including network wiring, EOL termination, power connections, input/output connections, pull-up resistor switch settings, see the relevant model’s Installation Guide. For extended information about wiring and sequences for specific applications, see the BAC-10000 Series Application Guide.

BAC-10000 Series

2

Operation Guide, Rev. J

Image 2
Contents Operation Guide Overview Applications and Installation Operation Basic About the FlexStat Configuration Initial SetupMain Menu Overview Advanced Menu Advanced Application OptionsValve Setup Sensor SetupStaging Setup Advanced CB Control Basic ProgramsAdvanced BACnet Communications Advanced Date/TimeAdvanced Temp. Setpoint Limits Advanced BACnet Device PropertiesAdvanced Inputs Advanced Motion Sensor Advanced Security Levels and Passwords Menu Items Access LevelsAdvanced Trend Logs Advanced TestAlarms Date/TimeSchedules Trend Viewer System SetupSetpoints Warm and Cold Starts Resetting the FlexStatTypes of Reset Restore Factory PC Data Port Connection Network ConnectionBACnet MS/TP Network Communication Communication Issues TroubleshootingAlarm Issues Cover and Display Issues Custom Programming and Web IssuesTemperature Setpoint Is Not Maintained Input, Sensor, and Value IssuesTemperature Reading Is Incorrect Input Values Are Outside the Expected RangeFan Does Not Run Output, Fan, and Relay IssuesAnalog Output Does Not Work Relay Internal Does Not WorkWiring Issues Relay External Does Not WorkAccessories MaintenanceFirmware Upgrade Programming CustomSupport Important NoticesReference Acronyms and AbbreviationsDefinitions of Terms For this document are included on thisSymbols IndexBAC-10000 Series KMC Controls, Inc

BAC-10000 specifications

The KMC BAC-10000 is a cutting-edge building automation controller designed to offer exceptional performance in monitoring and controlling HVAC systems, lighting, and various other building systems. This advanced controller is engineered to enhance energy efficiency, improve occupant comfort, and provide streamlined building management capabilities.

One of the main features of the KMC BAC-10000 is its versatility. It supports a wide variety of communication protocols, including BACnet, Modbus, and LonWorks. This multi-protocol capability allows for seamless integration with existing building systems, ensuring that users can easily incorporate the BAC-10000 into their building management setup without the need for additional hardware or extensive modification.

The controller is equipped with an intuitive user interface that simplifies the management of building systems. It includes a graphical display that provides real-time data, enabling operators to monitor system performance, adjust settings, and troubleshoot issues with ease. This user-friendly design promotes efficient operation and reduces the learning curve for new users.

In terms of technical specifications, the BAC-10000 boasts a powerful microprocessor and an extensive range of I/O points, allowing it to handle large and complex building automation tasks. With support for both digital and analog inputs and outputs, users can customize their setup to meet specific operational requirements.

Another standout feature of the KMC BAC-10000 is its advanced data logging capabilities. The controller can record historical data for various parameters, which can be crucial for performance analysis and optimization. This functionality enables facility managers to identify patterns, predict maintenance needs, and ultimately enhance the overall efficiency of their systems.

Security is also a priority with the BAC-10000, as it includes multiple layers of security protocols to protect against unauthorized access and tampering. This ensures that sensitive building management data remains safe and that users can operate the controller confidently.

In conclusion, the KMC BAC-10000 is a robust and flexible building automation controller that offers extensive features and technologies for effective building management. Its multi-protocol support, user-friendly interface, advanced data logging, and emphasis on security make it a top choice for modern building automation needs. By choosing the BAC-10000, facility managers can optimize energy usage, improve occupant comfort, and streamline operations within their buildings.