Service TIP

Installation of the Outdoor unit

•Ensure that the voltage is 230V 50Hz. Also check that the model and capacity matches those of the in- door unit.

•Select a position for the outdoor unit which allows for the shortest possible unobstructed pipe length. Ensure that the air intake and discharge are unobstructed and that there is enough room for servicing.

•Provide a concrete base or sturdy mounting plate and bolt the unit down using anti-vibration pads to reduce vibration and noise.

•Due to the use of resilient, rubber compressor mountings, it is no longer necessary to remove the outer cover and loosen the compressor mounting nuts.

•Two service valves are provided for ease of installation and servicing. They have gauge ports and Schrader valves.

•Connect, evacuate and charge the unit in the following manner:-

(a)Connect the piping between the indoor and outdoor units. Use a drop of refrigerant oil when form- ing the flares and ensure that they are without burrs and are of the correct shape and size.

(b)Connect the suction and discharge gauges to the gauge ports and evacuate the piping and the indoor unit using a good vacuum pump.

(c)When a low vacuum has been achieved, close the valves and the gauge manifolds and fully open the liquid and suction service valves with an allan key.

(d)Test for leaks before operating the unit.

NOTE:- The condensing unit has a full gas charge of R22 refrigerant which should be suffi- cient for a back-to-back installation with 1/4” and 1/2” copper tubing. When the required in- terconnecting piping is more than 9m, an additional 20g/m of refrigerant must be added.

(e)The additional refrigerant can be added either immediately after evacuation of the system or in va- pour form when the unit is running.

(f)Start up of the unit: Set the thermostat to the coldest position with the fan on maximum and push the Heating / Cooling button. A 2.5 to 3.0 minute time delay will be experienced before the com- pressor starts.

(g)Run the unit and observe the pressures and temperatures.

•The condensing temperature should be approximately 16°C to 18°C higher than the outdoor ambient temperature. The above should not be used as a charging method and is only a guide for new air-cooled split systems and air-cooled units with clean condensers and an unrestricted airflow.

•Operate the unit using all functions i.e.; fan only, heating, cooling and at various fan speeds. Ensure that the unit operates efficiently and quietly. Disconnect the gauges and check that all the screws that were removed have been replaced.

•Advise the customer how to operate the unit and explain the various features.

Part Number 059 044 specifications

Defy Appliances has consistently been at the forefront of innovative home solutions, and their Part Number 059 044 exemplifies this commitment. This appliance is designed with functionality and efficiency in mind, catering to various consumer needs while ensuring exceptional performance.

One of the main features of the Defy 059 044 is its energy-efficient design. As homeowners become increasingly conscious of their environmental footprint, energy efficiency has become a key selling point. The 059 044 model integrates advanced technology to reduce power consumption without compromising performance. This appliance is engineered to meet stringent energy-saving standards, making it a responsible choice for environmentally-minded consumers.

In terms of capacity, the Defy 059 044 boasts a spacious interior that accommodates a variety of cooking and storage needs. This feature is particularly beneficial for busy households, where meal preparation and storage can become a challenge. The adjustable shelving and customizable compartments enhance usability, allowing users to organize their space effectively.

Another notable technology within the Defy 059 044 is its advanced cooling system. This system ensures even temperature distribution, which is crucial for preserving food quality and minimizing spoilage. The appliance is equipped with a frost-free mechanism that eliminates the need for manual defrosting, subsequently saving time and effort for users.

Additionally, the Defy 059 044 prioritizes user-friendly controls. The intuitive interface is designed for ease of use, with straightforward settings that allow users to operate the appliance confidently. The clear display ensures that even those unfamiliar with technology can navigate its features without difficulty.

The design of the Defy 059 044 is both modern and aesthetically pleasing, making it a perfect addition to any contemporary kitchen. Its sleek exterior and neutral color options allow it to blend seamlessly with various decor styles, enhancing the overall look of the space.

Moreover, the Defy 059 044 is built to last, reflecting the brand's reputation for durability and reliability. The high-quality materials used in its construction ensure that the appliance can withstand daily use, providing consumers with peace of mind.

In summary, the Defy Appliances Part Number 059 044 is a well-rounded appliance offering energy efficiency, ample storage, advanced cooling technology, user-friendly controls, and a modern design. It stands as a testament to Defy's dedication to creating appliances that simplify life while delivering exceptional value.