Danby DPAC9010, DPAC10010 manual Troubleshooting, Problem Possible Cause Solutions

Page 10

TROUBLESHOOTING

Occasionally, a problem may occur that is minor, and a service call may not be necessary. Use this troubleshooting guide for a possible solution. If the unit continues to operate improperly, call an authorized service depot for assistance, or Danby’s Toll Free Number: 1-800-26-

PROBLEM

POSSIBLE CAUSE

SOLUTIONS

 

• Power is out.

• Wait for power to return.

 

• The plug is not plugged in properly.

1) Unit does not work

• Plug in properly.

• The full-tank indicator is ON; tank is

• Remove drain water from the drain

 

full.

tank.

 

• Current leaking or pressing test

 

• Press the reset button after resolving

 

button on LCDI plug.

 

problem.

 

 

 

 

 

 

• Indoor set temperature has been

• Reset the temperature level.

2) Unit suddenly stops during operation.

reached.

• Reset the timer.

 

• The preset time is up.

• Remove drain water from the drain

 

• The full-tank indicator is ON; tank is

 

full.

tank.

 

 

 

 

 

3) Unit runs intermittently

• Malfunction.

• Contact your dealer.

• Surrounding temp. is too high/low.

• This is normal.

 

 

• Exhaust duct hose is blocked.

• Check the duct hose.

 

 

 

 

• Window or door is open in room.

• Close all windows/doors.

4) Unit functions but the room is not

• There is a heat source or too many

people in the room.

• Move any heat sources from room.

cooled.

• Air intake grill is clogged.

• Clean air intake grill.

 

• Filter is too dirty.

• Replace the filter.

 

• Temperature setting is too high.

• Lower temp. setting.

 

 

 

5) Condensed water spills out when

• The tank is nearly full.

• Remove drain plug on rear bottom

moving the unit.

and drain out water.

 

 

 

 

9

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Keep These Instructions for Future Reference Model Modèle DPAC9010, DPAC10010Conserver CES Instructions Pour Consultation Ultérieur Welcome Electrical Specifications Important Safety InformationPower ENERGY-SAVING Important Safety Information cont’dFeatures TipsWindow KIT Installation InstallationInstructions for Assembling the Sliding Window Kit- Fig KEY PAD Functions AUTO-TIMEROperation OFFDehumidifier Operation cont’dAIR Conditioning FANBattery replacement Remote Control FeaturesControl Buttons Power Switch Mode Fan Speed Batteries should be replaced whenCleaning Care and MaintenanceCleaning Unit Damage to the unitTroubleshooting Problem Possible Cause SolutionsBienvenue 800-26Tableau Consignes DE Sécurité ImportantSpécifications Électriques CordonÉconomiseur Consignes DE Sécurité Important suiteCaractéristiques ’ENERGIEInstallation DU KIT DE Fenêtre Mode Climatisation SeulementMARCHE/ARRÊT FonctionnementFonctions DU Bloc Numérique Interrupteur D’ALIMENTATION Minuterie AutomatiqueFonctionnement suite ClimatiseurAutomatique Caractéristiques DE TélécommandeBoutons De Commande Les piles devraient être remplacées quandNettoyage DES Soins ET EntretienNettoyage DE L’UNITÉ Pourrait causer des dommages à l’unitéProbleme Cause Probable Solution DépannageModel Modèle DPAC9010, DPAC10010

DPAC9010, DPAC10010 specifications

The Danby DPAC9010 and DPAC10010 are portable air conditioners designed to provide effective cooling in various environments, ensuring comfort during warmer months. Both models are part of Danby’s commitment to delivering reliable climate control solutions that cater to modern needs.

The Danby DPAC9010 is ideal for smaller spaces, such as apartments and home offices, with a cooling capacity of 9,000 BTU. This model can effectively cool areas up to 350 square feet, making it perfect for bedrooms or small living rooms. On the other hand, the DPAC10010 boasts a slightly higher cooling capacity of 10,000 BTU and is suitable for spaces up to 450 square feet. This added power makes it an excellent choice for larger rooms or multi-use areas.

Both units are equipped with a control panel that allows users to easily adjust settings, including temperature and fan speed. They come with a remote control for added convenience, allowing users to change settings from a distance. A key feature of these models is their programmable timer function, which enables users to set the air conditioner to operate only when needed, promoting energy efficiency and reducing electricity costs.

Regarding technologies, both models utilize a refrigerant known for its environmental safety, aligning with today's eco-conscious standards. They also feature a built-in dehumidifier, which helps reduce humidity levels in the air, further enhancing comfort and reducing the feeling of stickiness in warmer weather.

The Danby DPAC9010 and DPAC10010 are designed with portability in mind. Each unit is equipped with smooth-rolling caster wheels and side handles that facilitate easy movement from room to room. The installation process is straightforward, with a quick-connect window kit included, allowing users to set up the units without the need for specialized tools.

In terms of energy efficiency, both models have earned the Energy Star certification, signifying their ability to cool rooms effectively while consuming minimal energy. This characteristic not only contributes to lower utility bills but also supports a greener environment.

Durability is another hallmark of Danby's design philosophy. The exterior casing is built to withstand the rigors of daily use while maintaining an aesthetically pleasing appearance. Additionally, both units have a washable air filter for easy maintenance, ensuring that the air quality remains high and the units operate efficiently.

In summary, the Danby DPAC9010 and DPAC10010 stand out as dependable portable air conditioning solutions. Their combination of cooling efficiency, user-friendly features, and environmentally conscious technology makes them excellent choices for anyone looking to beat the heat with convenience and comfort.
Top Page Image Contents