Important Safety Information, Power | Danby DPAC10010, DPAC9010

IMPORTANT SAFETY INFORMATION

READ ALL SAFETY INFORMATION BEFORE USING

ELECTRICAL

SPECIFICATIONS

1)Check available power supply and resolve any wiring problems BEFORE installation and operation of this unit. All wiring must comply with local and national electrical codes and be installed by a qualified electrician. If you have any questions regarding the following instructions, contact a qualified electrician.

2)This appliance draws 7.8 nameplate amps under Cooling Mode and may be used in any properly wired, general purpose 15 amp household grounded receptacle.

3)For your safety and protection, this unit is grounded through the power cord plug when plugged into a matching wall outlet. If you are not sure whether the wall outlets in your home are properly grounded, please consult a qualified electrician.

WARNING: Improper connection of the grounding plug can result in risk of Fire, Electric Shock, and/or injury to Persons associated with the appliance. Check with a qualified service representative if in doubt that the appliance is proplery grounded.

4)DO NOT USE PLUG ADAPTERS OR EXTENSION CORDS WITH THIS UNIT. If it is necessary to use an extension cord with this unit, use an approved “air conditioner” extension cord only (available at most local hardware stores).

5)To avoid the possibility of personal injury, always disconnect the power supply to the unit before installing and/or servicing.

TABLE 1

Suggested Individual Branch Circuit

Nameplate Amps	*AWG Wire Size
9.5	16

AWG- American Wire Gauge
*Based on copper wire at 60°C temperature rating.

	TABLE 2

	Receptacle and Fuse Types

Rated Volts	125

Amps	13

Wall Outlet
Wall Outlet

Fuse Size	15

Time Delay Fuse	Plug Type
(or Circuit Breaker)

CAUTION: Do not leave this unit unattended in a space where people or animals cannot react to a failed unit are located. A failed unit can cause extreme overheating or death in such an enclosed, unattended space.

POWER

The power cord supplied with this air conditioner contains a device that senses damage to

SUPPLY CORD the power cord. To test if your power cord is working properly, you must do the following:

1)Connect the power supply cord to an electrical outlet.

2)The power supply cord has two buttons located on the head of the plug. One button is marked “TEST”, and the other is marked “RESET”. Press the “TEST” button; you will hear a click as the “RESET” button pops out.

3)Press the “RESET” button; you will hear a click as the button engages.

4)The power supply cord is now energized and supplying electricity to the air conditioner (on some products this is also indicated by a light on the plug head).

NOTE: The power cord supplied with this air conditioner contains a current leakage detection device designed to reduce the risk of fire. In the event the power supply cord is damaged, it cannot be repaired and must be replaced with a new cord from the product manufacturer.

•Under no circumstances should this device be used to turn the unit on or off.

•The “RESET” button must always be pushed in (engaged) for correct operation.

•The power supply cord must be replaced if it fails to reset when the “TEST” button is pushed in.

DPAC9010, DPAC10010 specifications

The Danby DPAC9010 and DPAC10010 are portable air conditioners designed to provide effective cooling in various environments, ensuring comfort during warmer months. Both models are part of Danby’s commitment to delivering reliable climate control solutions that cater to modern needs.

The Danby DPAC9010 is ideal for smaller spaces, such as apartments and home offices, with a cooling capacity of 9,000 BTU. This model can effectively cool areas up to 350 square feet, making it perfect for bedrooms or small living rooms. On the other hand, the DPAC10010 boasts a slightly higher cooling capacity of 10,000 BTU and is suitable for spaces up to 450 square feet. This added power makes it an excellent choice for larger rooms or multi-use areas.

Both units are equipped with a control panel that allows users to easily adjust settings, including temperature and fan speed. They come with a remote control for added convenience, allowing users to change settings from a distance. A key feature of these models is their programmable timer function, which enables users to set the air conditioner to operate only when needed, promoting energy efficiency and reducing electricity costs.

Regarding technologies, both models utilize a refrigerant known for its environmental safety, aligning with today's eco-conscious standards. They also feature a built-in dehumidifier, which helps reduce humidity levels in the air, further enhancing comfort and reducing the feeling of stickiness in warmer weather.

The Danby DPAC9010 and DPAC10010 are designed with portability in mind. Each unit is equipped with smooth-rolling caster wheels and side handles that facilitate easy movement from room to room. The installation process is straightforward, with a quick-connect window kit included, allowing users to set up the units without the need for specialized tools.

In terms of energy efficiency, both models have earned the Energy Star certification, signifying their ability to cool rooms effectively while consuming minimal energy. This characteristic not only contributes to lower utility bills but also supports a greener environment.

Durability is another hallmark of Danby's design philosophy. The exterior casing is built to withstand the rigors of daily use while maintaining an aesthetically pleasing appearance. Additionally, both units have a washable air filter for easy maintenance, ensuring that the air quality remains high and the units operate efficiently.

In summary, the Danby DPAC9010 and DPAC10010 stand out as dependable portable air conditioning solutions. Their combination of cooling efficiency, user-friendly features, and environmentally conscious technology makes them excellent choices for anyone looking to beat the heat with convenience and comfort.