OPERATION- Features of the Control Panel

LCD

Display

	Water Full	ON/OFF
	Indicator
		Switch

EMERGENCY ON/OFF Switch

•This switch is used when unit needs to be temporarily switched on/off.

•Pressing the emergency will turn on the unit. The running mode and fan speed mode will be set automatically.

•Pressing the emergency button again will stop the unit.

Note: When the unit is on, remember to lift up the air outlet flap.

WATER FULL INDICATOR

•When illuminated, signifies condensed water inside the unit can’t be discharged and the condensation water level has reached full water level.

•The unit stops operating when this

indicator flashes. After discharging the water, press the POWER button to restart the unit. The operating mode will be that which was in operation before water full indicator illumination.

• LED light colour is RED

LCD DISPLAY

Cooling Mode

Dehumidify Mode

Fan only Mode

Auto Mode

High Fan Speed

Medium Fan Speed

Low Fan Speed

Display set temperature

Display timer setting of auto switch On/Off

Mode Control

The Mode Control has 4 settings:

• Cool • Dehumidify • Fan • Auto

The settings are adjusted by the Mode Control button

Fan Speed Control

The Fan Speed Control has 4 settings:

• Auto (Cool only) • High • Medium • Low

Temp. Set Controls

Press “ ” or “” to set temperature.

The setting ranges from 16°C (61°F) to 32°C (89°F).

Note: When choosing Auto, Dehumidify or Fan Mode, temperature setting button is invalid.