Danby DPAC7099 Cord, Energy-Saving, Tips, Your Danby appliance is designed to be highly efficient

Page 5

IMPORTANT SAFETY INFORMATION

POWER SUPPLY The power cord supplied with this air conditioner contains a device

CORD

that senses damage to the power cord. To test if your power cord is

working properly, you must do the following:

 

1)Connect the power supply cord to an electrical outlet.

2)The power supply cord has two buttons located on the head of the plug. One button is marked “TEST”, and the other is marked “RESET”. Press the “TEST” button; you will hear a click as the “RESET” button pops out.

3)Press the “RESET” button; you will hear a click as the button engages.

4)The power supply cord is now energized and supplying electricity to the air conditioner (on some products this is also indicated by a light on the plug head).

NOTE: The power cord supplied with this air conditioner contains a current leakage detection device designed to reduce the risk of fire. In the event the power supply cord is damaged, it cannot be repaired and must be replaced with a new cord from the product manufacturer.

Under no circumstances should this device be used to turn the unit on or off.

The “RESET” button must always be pushed in (engaged) for correct operation.

The power supply cord must be replaced if it fails to reset when the “TEST” button is pushed in.

ENERGY-SAVING

Your Danby appliance is designed to be highly efficient in

energy savings. Follow these recommendations for greater

TIPS

efficiency.

 

 

 

4) Start your air conditioner before the

1) Select a thermostat setting that suits your

outdoor air becomes hot and uncomfortable,

comfort needs and leave at that chosen

to avoid an initial period of discomfort while

setting.

 

the unit is cooling off the room. Use of the

2) The air filter is very efficient in removing

automatic start/stop programmable TIMER

feature can be a major asset in this regard if

airborne particles. Keep the air filter clean at

utilized to the fullest extent.

all times.

 

5) When outdoor temperatures are cool

3) Use drapes, curtains or shades to keep

enough, turn the air conditioner off and use

direct sunlight from penetrating and heating

the FAN MODE. This circulates indoor air,

room, but do not allow drapes or curtains to

providing some cooling comfort while utilizing

obstruct the air flow around the unit.

less electricity.

4

Image 5
Contents Climatiseur Portatif DpacTable of Contents Welcome Unit SpecificationsPart Identification Important Safety InformationElectrical Specifications ENERGY-SAVING CordTips Your Danby appliance is designed to be highly efficientInstallation Accessories InstallationAir Conditioning Mode only Window KITLCD Display OPERATION- Features of the Control PanelWater Full Indicator Remote Control AIR Conditioning Operating InstructionsDraining Excess Water FAN Operating Instructions cont’dDehumidifier Filter Care and MaintenanceCleaning Unit Problem Possible Cause TroubleshootingSolution Unit does not work Power is outSoins ET Entretien Table DES MatièresSpécifications DE L’UNITÉ Identification DE Partie Spécifications DE L’UNITÉ BienvenueConsignes DE Sécurité Important Identification DE PartieSpécifications Électriques TableauVentilateur à la position Haute CordonSuggestions Pour KIT DE Fenêtre Mode Climatisation SeulementFerrure Fenêtre HorizontalePlein Indicateur DE Leau OPÉRATION- Dispositifs de Panneau de CommandeTélécommande Vindage DE ’EXÉS D’EAU FonctionnementVentilateur Fonctionnement suiteNettoyage DES Soins ET EntretienNettoyage DE Lunité Lunité ne fonctionne pas Il ny a pas dalimentation Probleme Cause ProbableDépannage