Integra DTR-5.9 Connecting a TV or Projector, Video Connection, Audio Connection, Hint

Connecting Your Components—Continued

Connecting a TV or Projector

Step 1: Video Connection

Choose a video connection that matches your TV ( A , B , or C ), and then make the connection.

Step 2: Audio Connection

Choose an audio connection that matches your TV ( a , b , or c ), and then make the connection.

The onscreen setup menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected to the composite video or S-Video MONITOR OUT, or the COMPONENT VIDEO OUT, use the DTR-5.9’s display when changing settings.

•With connection , you can listen to and record audio from your TV or listen in Zone 2.

•To enjoy Dolby Digital and DTS, use connection or . (To record or listen in Zone 2 as well, use and , or and .)

Connection				AV receiver	Signal flow	TV	Picture quality
	A	COMPONENT VIDEO OUT			⇒	Component video input	Best
			MONITOR OUT S		⇒	S-Video input	Better
	B
	C		MONITOR OUT V		⇒	Composite video input	Standard
			GAME/TV IN L/R		⇐	Analog audio L/R output
	a
	b	DIGITAL IN COAXIAL 2			⇐	Digital coaxial output
		DIGITAL IN OPTICAL 1			⇐	Digital optical output
	c

b

c

A

ANTENNA

C

75

B

a

				L		R
COAXIAL	OPTICAL	Y	PB	PR	AUDIO	S VIDEO	VIDEO
OUT	OUT	COMPONENT VIDEO IN			OUT	IN	IN

Connect one or the other

Connection c must be assigned (see page 45)

TV, projector, etc.

Hint!

If your TV has no audio outputs, connect an audio output from your VCR or cable or satellite receiver to the AV receiver and use its tuner to listen to TV programs through the AV receiver (see pages 27 and 29).

24