Integra DTR-5.9 instruction manual Pink noise test tone is output by the front left speaker

Advanced Setup—Continued

6	Use the Down [		] button to	2
	select “Left”, and use the Left
	and Right [ ]/[		] buttons to
	specify the distance for the front
	speakers, then press the Down
	[	] button to select the next
	speaker.
7	Repeat step 6 for all speakers.
	Note:
	•	Speakers that you set to No or None
		in the Speaker Configuration		3
		(page 82) cannot be selected.

8	Press the [Setup] button.
	Setup closes.

Notes:

• The Center and Subwoofer distances can be set up to 5 ft. (1.5 m) more or less than the Left distance. For example, if the Left distance is set to 20 ft. (6 m), the

Center and Subwoofer distances can be set between 15 4 and 25 ft. (4.5 and 7.5 m).

• The Surround and Surround Back distances can be set up to 5 ft. (1.5 m) more or 15 ft. (4.5 m) less than the Left distance. For example, if the Left distance is set

to 20 ft. (6 m), the SurrRight, Surr Left, Surr Back R, 5 and Surr Back L distances can be set between 5 and 25

ft. (1.5 and 7.5 m).

• The speaker distance cannot be adjusted while a pair of headphones is connected or the multichannel DVD input is being used.

Speaker Levels

These settings are set automatically by the Automatic

Speaker Setup function (see page 39).

You can set the volume level of each speaker so that all speakers can be heard equally at the listening position.

Note: 6

• The speaker levels cannot be adjusted while a pair of headphones is connected or the AV receiver is muted.

1	Press the [Receiver] Remote
	Mode button, followed by the	7
	[Setup] button.

The main menu appears onscreen.

If the main menu doesn’t appear, make sure the appropriate external input is selected on your TV.

Use the Up and Down []/[ ] buttons to select “2. Speaker Setup,” and then press the [Enter] button.

Use the Up and Down []/[ ] buttons to select “4. Level Cali- bration,” and then press [Enter].

A pink noise test tone is output by the front left speaker.

Turn up the volume so that you can hear the test tone suffi- ciently.

As each speaker outputs the test tone, its name appears on the display.

Use the Left and Right [	]/[ ]
buttons to adjust the speaker
level, and use the Down [	] but-

ton to select the next speaker.

The levels can be adjusted from –12 to +12 dB in 1 dB steps (–15 to +12 dB for the subwoofer).

Repeat step 5 so that the level of the test tone coming from each speaker is the same.

Speakers that you set to No or None in the Speaker Configuration (page 82) do not output the test tone.

Press the [Setup] button.

Setup closes.

Don’t forget to turn down the volume if you turned it up while setting the levels.

85