Integra Enjoying music or videos with the DTR-9.1, If one of the messages shown below appears

Page 53

Enjoying music or videos with the DTR-9.1

Using the sleep time:

To set the sleep timer, press the SLEEP button on the remote controller and then set the time that you want the DTR-9.1 to enter the standby state (see page 57).

Temporarily turning off the sound:

To turn off the sound momentarily, such as when in- terrupted by a phone call, press the MUTING button on the remote controller (see page 57).

Adjusting the bass and treble:

You can adjust the bass and treble levels at the Sound Effect sub-menu of the OSD menu: Input Setup → Sound Effect (see page 40).

Adjusting the brightness of the front display:

You can adjust the brightness of the front display of the DTR-9.1 with DIMMER button on the remote con- troller or on the DTR-9.1 front panel (see page 57).

If one of the messages shown below appears

If one of the messages shown below appears in the front display, it is telling you that the operation you are trying to perform is not possible for the reason given in the message.

The operation is not allowed because headphones are plugged into the DTR-9.1.

The operation is not allowed because the selected in- put source is set for multichannel input.

The operation is not allowed by the current speaker configuration.

No setting other than Dolby Digital can be set.

Enjoying the multichannel output

Before you can use a component with multichannel output, you must first select “Yes” for the Multichannel setting in the OSD menu for that input source: Input Setup → Multichannel Setup (see page 36).

1.Press the input source button for the component with multichannel output connected to the MULTI CHANNEL INPUT on the rear of the DTR-9.1.

2.Turn on the connected component and start playing the desired media.

3.If necessary, press the CH SEL button on the remote controller to select an individual speaker. Then press the LEVEL + or – button to adjust the output level as desired.

Adjust the speaker output levels so that you can hear the same sound level from each speaker at the listening position. For the front right, front left, center, surround right,surround left, surround back right and surround back left speakers, the output levels can be adjusted between –12 to +12 deci- bels. The subwoofer can be adjusted between –30 and +10 decibels.

4.Adjust the volume with the MASTER VOLUME dial or the VOL buttons on the remote controller.

53

Page 52 Page 54
Image 53
Page 52 Page 54
Contents DTR-9.1 Avis Important SafeguardsFor U.S. model PrecautionsFor Canadian model Modele pour les CanadienContents Contents Supplied accessoriesTHX Ultra FeaturesAssignable and Configuaragble 12-Volt Trig Using the remote controller Before using remote controllerFront panel Front panel facilitiesFront panel door Front panel displayFront panel facilities Preset TuningFM Mode OffSEND/LEARN indicator LCD display Power ON/STNBY button Remote controllerModel NO. DTR-9.1 Rear panel facilitiesCoaxial, optical, and input-only AC-3RF Rear panel facilitiesAC Inlet Video IN/OUT Video Monitor OUT Example of how to connect your equipmentStandard connections Example of how to connect your equipmentDefault setting Connecting a turntable Connecting your audio componentsConnecting an MD recorder, DAT deck, or CD recorder Connecting a compact disc playerConnecting a video cassette recorder Connecting a LD playerConnecting a satellite tuner or television Connecting a television monitor or projectorIdeal speaker configuration Connecting speakersMinimum speaker configuration for surround sound playback Speaker placementConnecting a subwoofer Connecting speakersAssembling the AM loop antenna Connecting antennasConnecting the AM loop antenna Connecting an FM outdoor antenna Connecting antennasConnecting an AM outdoor antenna Directional linkageOutline Connecting to the IR in Zone 2 inputConnecting the main and remote zones Cabinet Connecting to the IR in Main inputRemove the jumper plugs Connect a graphic equalizer Connecting a graphic equalizer Connecting power amplifiersRemove the jumper plugs Connect the power amplifiers Turning the power on from the remote controller Connecting the powerOn-Screen Display OSD menu Up into six menus Speaker Setup, Input Setup, ListeningYour home theater, and it rarely needs to be Changed later OSD menu consists of a main screen that is dividedPress the Menu button On-Screen Display OSD menuNavigating through the OSD menu Speaker Config sub-menu Speaker SetupSpeaker Distance sub-menu Speaker SetupCalibrating the speaker levels Level Calibration sub-menuBass Peak Level Bass Peak Level Manager* sub-menu LFE Level Setup sub-menuDigital Setup sub-menu Input SetupInput Setup Video Setup sub-menu Multichannel Setup sub-menuDTS Mpeg Listening Mode Preset sub-menuListening Modes Input source signalsInput Setup 123456789012345678901234 4.Preference Delay sub-menu Sound Effect sub-menuCharacter Input sub-menu Miscellaneous SetupListening Mode Setup menu Listening Mode SetupListening Mode Setup Description listening mode parameters THX Preference Volume Setup sub-menuOSD Tweak OSD Setup sub-menuPreference Lock Setup sub-menu Zone2 OSD SetupAbout VersionEnjoying music or videos in the remote zone Power VOLPress the Zone 2 button on the DTR-9.1 Select a source Input selector buttonsListening to FM/AM Radio Stations PresetListening to Radio Broadcasts This erases the selected preset station Press the Enter button again to finalize the procedureListening to Radio Broadcasts Press the Memory button on the front panelSelecting an input source Listening with headphones Changing the listening modeAdjusting the volume Using the many features of the DTR-9.1Enjoying the multichannel output Enjoying music or videos with the DTR-9.1If one of the messages shown below appears Start recording at the recording component as desired Recording a sourcePress the Rec Out button twice within 8 seconds Recording a source Using the remote controller to control each device Using remote controllerPress the AUDIO/TAPE Mode button Controlling the DTR-9.1Listening mode buttons Using remote controllerPress the MD Mode button Press the CD Mode buttonControlling an Integra CD player Controlling an Integra MD recorderPress the TUN input selector button Controlling an Integra cassette tape deckControlling an Integra DVD player Press the DVD Mode buttonSAT, CABLE, VCR, and TV Mode buttons Buttons Programming procedurePage Press and release the same Mode button again Erasing the programmed command from one buttonSEND/LEARN indicator Mode buttons You can only erase memorized commands and not preset onesPress the Mode Macro button to complete the programming Using a Macro functionProgramming a Macro function Running a Macro functionPress the Direct Macro button to complete the procedure Using a Macro functionProgramming the Direct Macro function Check to see if the macro has been properly programmedPress the Direct Macro button again Press the Mode Macro button againMacro mode programming memo Erasing all commands and macros that have been programmedPress the ENT button OperationTroubleshooting guide Troubleshooting guide Cannot change OSD Menu settings OSD menu settings cannot be changedLate Night function cannot be used LFE Level function cannot be usedSpeaker Setup Default settingsInput Setup Zone2 OSD SetupInputs Your system settingTape Your system settingSpeakers OSD SetupMode Remote controllerSpecifications Other upgraded function Upgraded-2 Important points regarding speaker placement Speaker configuration and placement/ Connecting speakersCrossover80HzTHX QuitOSD Boundary Gain Channel digital surround format Digital Setup sub-menu Listening Mode Preset sub-menuRelationship between input source and listening mode Upgraded-8 THX When Upsampling is set to On, DTS Neo6 cannot be selected DTS-ES Upgraded-12 DTS-ES Upgraded-14 Parameter Delay sub-menu Other upgraded function

DTR-9.1 specifications

The Integra DTR-9.1 is a high-performance 7.1-channel surround sound receiver designed for audiophiles and home theater enthusiasts who demand superior sound quality and advanced features. This model, crafted by the renowned manufacturer Integra, showcases a blend of cutting-edge technology and user-friendly operation, making it a standout choice for home entertainment systems.

One of the notable features of the DTR-9.1 is its robust amplification system. Equipped with discrete high-current amplifiers, it delivers a powerful output of 130 watts per channel, ensuring dynamic sound reproduction for movies, music, and gaming. The receiver supports various surround sound formats, including Dolby Digital Plus, Dolby TrueHD, DTS-HD Master Audio, and DTS Neo:6, providing an immersive audio experience that brings your media to life.

The DTR-9.1 incorporates advanced video processing capabilities, including upscaling of standard definition and high definition content to 1080p via HDMI, ensuring that your visuals maintain clarity and detail. With multiple HDMI inputs and outputs, this receiver offers extensive connectivity options, accommodating various devices such as Blu-ray players, gaming consoles, and streaming devices.

Another significant aspect of the Integra DTR-9.1 is its integration of Audyssey technologies, specifically Audyssey MultEQ and Audyssey DynamicEQ. These features enable automatic room calibration, optimizing speaker settings to adapt to the acoustic characteristics of your space. This ensures balanced sound reproduction across all frequencies, providing an enhanced listening environment.

In addition, the DTR-9.1 is equipped with a user-friendly interface and an ergonomic remote control, offering ease of navigation through its features. The on-screen display is intuitive, making it accessible for users to adjust settings and preferences with minimal hassle.

For music enthusiasts, the receiver supports streaming services and includes built-in Bluetooth and Wi-Fi connectivity, allowing for seamless streaming from smartphones or tablets. The DTR-9.1 also features a Zone 2 output, enabling multi-room audio setups, delivering flexibility in how and where to enjoy your favorite tunes.

Overall, the Integra DTR-9.1 combines exceptional sound quality, versatile connectivity, and advanced technologies, making it a top choice for consumers looking to enhance their home audio and video experience. Whether used for thrilling movie nights or casual music listening, this receiver promises to deliver performance and satisfaction for discerning users.
Top Page Image Contents