Integra instruction manual Technical Specification, ST2 Smart Tuner

Page 26

TECHNICAL SPECIFICATION

ST2 Smart Tuner

Dimensions: 17"W x 8"D x 1.8"H (43 x 20.3 x 4.4 cm)

Weight: 7 lbs. (3.2kg)

Power Supply: 12VDC 1.5A

Frequency Range: AM 530 - 1710 kHz

FM 87.7 - 107.9 MHz

FM Antenna impedance: 75 ohm unbalanced

Impedance: 300 ohm balanced

AM

Sensitivity @ S/N: 20dB 55 dBu

Image rejection: 33dB

S/N ratio: 45 dB

FM

Sensitivity @ S/N: 30 dB 6dB max 12 dBu

Image rejection: 80 dB

S/N ratio: 60 dB

26

Image 26
Contents ST2 Smart Tuner Important Safeguards Safety InstructionsTable of Contents RNET-enabled System IntroductionBOX Contents Component Guide ST2 Front PanelST2 Rear Panel ST2 S mart TunerST2-RC Remote Control ST2 Setup and Connections Basic ConnectionsSource Connections with CAV6.6 Controller/Amplifier ST2-KP and CAV6.6 ConnectionsST2-KP Connections to ST2 Tuner Non-RNET Systems Source Connections with CAi Series Controller/Amplifier Source Connections with A-BUS Audio Distribution HubAM Antenna Connecting an Indoor and Outdoor AntennaAntenna Connections FM AntennaGrounding an Outdoor Antenna Front Panel Operation ST2 OperationFront Panel Controls Saving Favorites ST2-RC Remote Control OperationFrequency Seek ST2-KP Keypad Controls ST2-KP Keypad OperationFrequency Scan UNO-S2 Keypad Controls with CAV6.6CAV6.6-UNO-S2 Keypad Operation MuteMHz FM UNO-LRC1 Remote Control with CAV6.6 UNO-LRC1 Remote Control OperationSeek UP/DOWN Seeks next tuned station up or down ST2 Tuner Programming ST2 Tuner Setup MenuST2 Chassis Setup Menu Update Firmware Chassis cont’d Factory Initialization ChassisMemory Name AM/FM Tuner Setup Menu for AM/FMSystem Info Chassis Bank Name AM/FMRegion AM/FM Backup and RestoreBank Name AM/FM cont’d Source Configuration Note Programming for CAV6.6 USETechnical Specification ST2 Smart TunerWarranty & Repair Russound Rev 5/24/04 28-1150