ResMed III user manual Humidifiers, Accessories

Page 13

Notes:

•ResMed VPAP devices have been designed and manufactured to provide optimum performance using ResMed vented mask systems. While other vented mask systems may be used, performance and data outputs may be affected. To select an appropriate setting for another mask system, find the closest match to a ResMed mask in Table 3 on page 23.

•Not all masks are available in all regions.

Humidifiers

Please refer to the illustrations in section B of the illustration sheet.

A humidifier may be required if you are experiencing dryness of the nose, throat or mouth. The VPAP is compatible for use with the following humidifiers:

•HumidAire 2i™ heated humidifier (B-1)

•HumidAire 2iC™ passover humidifier (B-2)

•HumidAire™ heated humidifier (B-3)

•ResMed Passover humidifier (B-4).

WARNING

! Only the HumidAire 2i, HumidAire 2iC, HumidAire heated humidifier and the ResMed Passover are compatible for use with the VPAP. Please refer to Warnings on page 2.

Accessories

Please refer to the illustrations in section C of the illustration sheet.

The following accessories may be purchased separately:

•3 m air tubing (C-1)

•Medium (52 cm) air tubing for the HumidAire and ResMed Passover humidifiers (C-2).

Note: ResMed regularly releases new products. Please check our website at <www.resmed.com>.

6

Image 13

Contents 248127/1 05 Illustrations 52 cm 3 m English Manufactured by Contents Limited Warranty Index Medical Information IntroductionUser/Owner Responsibility What the Vpap III and Vpap III ST are Intended forPage Medical Information Adverse EffectsPage Masks Vpap SystemHumidifiers AccessoriesSetting Up The Vpap Setting up the Vpap SystemAttaching a Humidifier Attaching a HumidAire 2iC Humidifier Attaching a HumidAire 2i HumidifierAttaching a HumidAire Humidifier Attaching a Passover Humidifier LCD Screen Using the LCD Screen and KeypadKeypad Keys KeyFunction FrontRight red Key Function Left greenPage Ramp time Starting TreatmentStarting Treatment Using the Mask-Fitting Feature Using the HumidAire 2i Warm-Up FeatureStopping Treatment High Leak Page Daily Cleaning Cleaning and MaintenanceWeekly Cleaning Periodic CleaningServicing Replacing the Air FilterHow to Use the Standard Menu How to Use the Vpap MenusRamp Screen To exit out of the menu Press the Right key exit How to Use the Detailed Menu if enabled by your clinicianVpap Detailed Menu Series if enabled by your clinician Menu Functions Detailed menu only Settings MenuTo enter a submenu Press the Left key enter Settings for mask types Mask Function Default Function Description Setting OptionsResults Menu Function Function Description Setting Options Settings MaskResults Menu Servicing Menu Options MenuTreatment screen Treatment ScreensHow to Use the Vpap Menus Page Helpful Hints Using a Battery and an InverterStarting out Nasal IrritationPage Troubleshooting TroubleshootingCheck tube Key if done Problem Possible Cause SolutionLast session Page Dynamic pressure characteristics System SpecificationsFlow sensor in flow generator IEC 60601-1 ClassificationsPressure Variation Pressure Volume curvePressure cm H2O BreathsEnvironmental information Symbols which appear on the productEmissions test Compliance Next Portable and mobile RF communications Separation distance according to frequency of transmitter Product Warranty Period Limited WarrantyLimited Warranty Page Index